Tin Klačić

Dr. Tin Klačić

orcid

Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
24 June 2022 in Polymers
Verified
Journal Article
Open access
PDF file
MMMia Mesic
Mia Mesic
TKTin Klačić
Tin Klačić
AAAnze Abram
Anze Abram
Klemen BohincKlemen Bohinc
Klemen Bohinc
DKDavor Kovacevic
Davor Kovacevic
Polyelectrolyte multilayers are coatings formed by the alternate deposition of polycations and polyanions on a charged surface. In this study we examined how the type of substrate affects a multilayer prepared from poly(allylamine hydrochloride) and poly(acrylic acid). Silicon and titanium wafers were used as substrates. Their properties were systematically studied using ellipsometry, tensiometry, atomic force microscopy and streaming potential measurements. Multilayers were built up at pH = 7 with tetramethylammonium chloride as the background salt. The growth of films was monitored by ellipsometry, while the morphology and surface roughness were determined by atomic force microscopy. It was found that the thickness of multilayers containing 10 layers on silicon is 10 nm, whereas the thickness of the same film on titanium is three times higher. It was shown that multilayers formed on silicon display a grain-like structure, which was not the case for a film formed on titanium. Such morphological properties are also reflected in the surface roughness. Finally, it was shown that, in addition to the electrostatic interactions, the hydrophobicity of the substrate also plays an important role in the polyelectrolyte multilayer formation process and influences its thickness and properties.

26 October 2022 in Macromolecules
Verified
Journal Article
Open access
TKTin Klačić
Tin Klačić
Klemen BohincKlemen Bohinc
Klemen Bohinc
DKDavor Kovacevic
Davor Kovacevic
Thin films made of weak polyelectrolytes poly(allylamine hydrochloride) (PAH) and poly(acrylic acid) (PAA) have been fabricated on silicon wafers using the layer-by-layer (LbL) method. To study the influence of counteranion type on the growth and properties of PAH/PAA multilayers, the nature of the supporting sodium salt was varied from cosmotropic to chaotropic anions (F-, Cl-, and ClO4 -). Results of ellipsometry and AFM measurements indicate that the film thickness and surface roughness systematically increase on the order F- < Cl- < ClO4 -. Furthermore, we found that the hydrophobicity of the PAH/PAA multilayer also follows the described trend when a polycation is the terminating layer. However, the heating of PAH/PAA multilayers to 60 °C during the LbL assembly suppressed the influence of background anions on the multilayer formation and properties. On the basis of the obtained results, it could be concluded that thermal annealing induces changes at the polymer-air interface in the sense of reorientation and migration of polymer chains.

25 May 2021 in Coatings
Verified
Journal Article
Open access
PDF file
Klemen BohincKlemen Bohinc
Klemen Bohinc
LKLora Kukić
Lora Kukić
RŠRoman Štukelj
Roman Štukelj
AZAnamarija Zore Zore
Anamarija Zore Zore
AAAnze Abram
Anze Abram
DKDavor Kovacevic
Davor Kovacevic
The application of catheters to the urinary tract is associated with nosocomial infections. Such infections are one of the most common types of infections in hospitals and health care facilities and can lead to numerous medical complications. Therefore, the understanding of the properties of urinary catheter surfaces and their potential modifications are crucial in order to reduce bacterial adhesion and subsequent biofilm formation. In our study, we consider standard polyvinyl chloride (PVC) catheter surfaces and compare their properties with the properties of the same surfaces coated with poly(diallyldimethylammonium chloride)/poly(sodium 4-styrenesulfonate) (PDADMA/PSS) polyelectrolyte multilayers. Uncoated and coated surfaces were characterized by means of roughness, hydrophobicity, and zeta potential measurements. Finally, bacterial adhesion extent of uropathogenic Escherichia coli on bare and polyelectrolyte multilayer coated surfaces was measured. The obtained results show that on non-treated surfaces, biofilm is formed which was not the case for multilayer coated surfaces. The PSS-terminated multilayer shows the lowest bacterial adhesion and could be helpful in prevention of biofilm formation. The analysis of the properties of the uncoated and coated surfaces reveals that the most significant difference is related to the charge (i.e., zeta potential) of the examined surfaces, while roughness and hydrophobicity of the examined surfaces are similar. Therefore, it could be concluded that the surface charge plays the crucial role in the bacterial adhesion on uncoated and coated PVC catheter surfaces.

25 May 2023 in ACS Omega
Verified
Journal Article
Open access
JNJuraj Nikolić
Juraj Nikolić
AIAna Ivančić
Ana Ivančić
TKTin Klačić
Tin Klačić
DKDavor Kovacevic
Davor Kovacevic
Polyelectrolyte multilayers are nanofilms with vast applications in numerous areas such as medicine and food industry. Recently, they have been getting a lot of attention as potential food coatings for the prevention of fruit decay during transportation and storage, and therefore the coatings need to be biocompatible. In this study, we fabricated thin films made of biocompatible polyelectrolytes, positively charged polysaccharide chitosan, and negatively charged carboxymethyl cellulose on a model silica surface. Typically, to enhance the properties of the prepared nanofilms, the first layer (precursor layer) of poly(ethyleneimine) is used. However, for the construction of completely biocompatible coatings, this could be problematic due to potential toxicity. This study offers an option for a viable candidate as a replacement precursor layer: chitosan itself was adsorbed from a more concentrated solution. In the case of chitosan/carboxymethyl cellulose films, using chitosan over poly(ethyleneimine) as a precursor layer has shown a twofold increase in film thickness, as well as an increase in film roughness. In addition, these properties can be tuned by the presence of a biocompatible background salt (e.g., sodium chloride) in the deposition solution that has proven to change the film thickness and surface roughness depending on the salt concentration. Such a straightforward way of tuning the properties of these films combined with their biocompatibility makes this precursor material a prime candidate for use as a potential food coating.

21 October 2021 in Minerals
Verified
Journal Article
Open access
PDF file
TKTin Klačić
Tin Klačić
JKJozefina Katić
Jozefina Katić
DNDanijel Namjesnik
Danijel Namjesnik
JJJasmina Jukić
Jasmina Jukić
DKDavor Kovacevic
Davor Kovacevic
TBTajana Begović
Tajana Begović
In this study, the surface properties of Ti/TiO2 substrate before and after the adsorption of polyelectrolytes were investigated. As model polyelectrolytes, strongly charged polycation poly(diallyldimethylammonium) (PDADMA) and strongly charged polyanion poly(4-styrenesulfonate) (PSS) were used. Initially, the bare titanium substrate was characterized by means of ellipsometry, atomic force microscopy (AFM), cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS) and measurements of inner surface potential using crystal electrode (CrE). It was shown that the substrate surface is very smooth with the roughness of 3.5 nm and oxide layer thickness of 3.8 nm. After the adsorption of PDADMA and PSS, polyelectrolyte-coated titanium surface was examined using the above-mentioned methods under the same conditions. It was found that both PDADMA cations and PSS anions form a stable polymeric nanofilm on Ti/TiO2 surface that partially covers the surface, without significant impact on the surface roughness. The corrosion protection effectiveness values indicate that the corrosion properties were greatly enhanced upon polyion adsorption and polyelectrolyte coating formation on the flat TiO2 surface. The obtained results were additionally confirmed by inner surface potential measurements. According to the methods employed, PDADMA nanofilm modification offers enhanced corrosion protection to the underlying titanium material in sodium chloride electrolyte solution.

8 January 2025 in Journal of Colloid and Interface Science
Verified
Journal Article
Open access
DDDavid Dell'ANgelo
David Dell'ANgelo
AJAna Jurković
Ana Jurković
TKTin Klačić
Tin Klačić
Yann FoucaudYann Foucaud
Yann Foucaud
Michael BadawiMichael Badawi
Michael Badawi
TBTajana Begović
Tajana Begović
The phenomenon of solid dissolution into a solution constitutes a fundamental aspect in both natural and industrial contexts. Nevertheless, its intricate nature at the microscale poses a significant challenge for precise quantitative characterization at a foundational level. In this work, the influence across three specific cleavage planes, namely (100), (111), and (110) on the dissolution kinetics of fluorite in aqueous environments was examined from both experimental and theoretical standpoints. For the very first time, the surface potential of fluorite planes during dissolution was measured by means of a fluorite single-crystal electrode. Experimental results indicate that the dissolution of fluorite leads to a marked increase in surface roughness as well as an augmentation in the surface area of all analyzed surfaces. The most significant alteration in roughness is observed on the (111) plane, whereas the most substantial increase in surface area occurs on the (110) plane. In comparison to the (100) crystallographic plane, which demonstrates the slowest dissolution kinetics, the (111) and (110) planes display dissolution at a comparatively expedited rate. Theoretical simulations corroborate this trend, concurrently facilitating an effective examination of the system's free-energy landscape to analyze the dynamics and rates associated with the attachment and detachment of ions to the fluorite surface. Notably, the presence of interfacial defects has the potential to influence the free energy landscape, thereby altering the transition of ions into the bulk solution. Ultimately, the interplay of correlations and discrepancies between experimental findings and theoretical predictions is critically examined.