Moutaz Eldirderi

Dr. Moutaz Eldirderi


Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
29 April 2021 in Processes
Verified
Journal Article
Open access
PDF file
KKKhadijah Katubi
Khadijah Katubi
Abdelfattah AmariAbdelfattah Amari
Abdelfattah Amari
Hamed Nasser HarharahHamed Nasser Harharah
Hamed Nasser Harharah
MEMoutaz Eldirderi
Moutaz Eldirderi
Mohamed TahooonMohamed Tahooon
Mohamed Tahooon
Faouzi Ben RebahFaouzi Ben Rebah
Faouzi Ben Rebah
Aloe vera plant offers a sustainable solution for the removal of various pollutants from water. Due to its chemical composition, Aloe vera has been explored as coagulant/flocculant and biosorbent for water treatment. Most of the used materials displayed significant pollutants removals depending on the used preparation methods. AV-based materials have been investigated and successfully used as coagulant/flocculant for water treatment at laboratory scale. Selected AV-based materials could reduce the solids (total suspended solids (TSS), suspended solids (SS), total dissolved solids (TDS), and dissolved solids (DS)), turbidity, chemical oxygen demand (COD), biochemical oxygen demand (BOD), heavy metals, and color, with removal percentages varied depending on the coagulant/flocculant materials and on the wastewater characteristics. In the same context, AV materials can be used as biological flocculant for wastewater sludge treatment, allowing good solid–liquid separation and promoting sludge settling. Moreover, using different methods, AV material-based biosorbents were prepared and successfully used for pollutants (heavy metal dyes and phenol) elimination from water. Related results showed significant pollutant removal efficiency associated with an interesting adsorption capacity comparable to other biosorbents derived from natural products. Interestingly, the enzymatic system of Aloe vera (carboxypeptidase, glutathione peroxidase, and superoxide dismutase) has been exploited to degrade textile dyes. The obtained results showed high promise for removal efficiencies of various kinds of pollutants. However, results varied depending on the methodology used to prepare the Aloe vera based materials. Because of its valuable properties (composition, abundance, ecofriendly and biodegradable), Aloe vera may be useful for water treatment.

17 November 2022 in Materials
Verified
Journal Article
Open access
PDF file
Mohammed AlkhabetMohammed Alkhabet
Mohammed Alkhabet
ZYZaher Mundher Yaseen
Zaher Mundher Yaseen
MEMoutaz Eldirderi
Moutaz Eldirderi
KKKhaled Khedher
Khaled Khedher
AJAli Jawad
Ali Jawad
MYMohd Yaacob
Mohd Yaacob
Gaseous pollutants such as hydrogen gas (H2) are emitted in daily human activities. They have been massively studied owing to their high explosivity and widespread usage in many domains. The current research is designed to analyse optical fiber-based H2 gas sensors by incorporating palladium/graphene oxide (Pd/GO) nanocomposite coating as sensing layers. The fabricated multimode silica fiber (MMF) sensors were used as a transducing platform. The tapering process is essential to improve the sensitivity to the environment through the interaction of the evanescent field over the area of the tapered surface area. Several characterization methods including FESEM, EDX, AFM, and XRD were adopted to examine the structure properties of the materials and achieve more understandable facts about their functional performance of the optical sensor. Characterisation results demonstrated structures with a higher surface for analyte gas reaction to the optical sensor performance. Results indicated an observed increment in the Pd/GO nanocomposite-based sensor responses subjected to the H2 concentrations increased from 0.125% to 2.00%. The achieved sensitivities were 33.22/vol% with a response time of 48 s and recovery time of 7 min. The developed optical fiber sensors achieved excellent selectivity and stability toward H2 gas upon exposure to other gases such as ammonia and methane.

25 September 2023 in Sustainability
Verified
Journal Article
Open access
PDF file
AJAtef El Jery
Atef El Jery
MEMoutaz Eldirderi
Moutaz Eldirderi
NGNaoufel Ghoudi
Naoufel Ghoudi
MMMohammadreza Moradi
Mohammadreza Moradi
IAIsmat Ali
Ismat Ali
Saad Shauket SammenSaad Shauket Sammen
Saad Shauket Sammen
This study used porous nanomaterials MCM-41 and SBA-15, as well as their modified species, to remove lead and cadmium ions from water. We used X-ray diffraction (XRD), a scanning electron microscope (SEM), the Brunauer–Emmett–Teller (BET), and the Fourier transform infrared (FT-IR) method to investigate the characteristics of porous nanomaterials. Additionally, atomic absorption spectroscopy (AAS) measured the concentration of lead and cadmium ions. The stratigraphic analysis showed the samples’ isothermal shape to be type IV. This study investigated the amount, absorbent, pH changes, and adsorption time parameters. We observed that the adsorption efficiency of lead by the synthesized samples was higher than that of the adsorption of cadmium. Mesoporous structures also displayed increased adsorption efficiency due to the amino group. Four testing stages were conducted to determine the reproducibility of the adsorption by the synthesized samples, with the results showing no significant changes. As a result of the adsorption process, the structure of the recycled sample NH2-MCM-41 was preserved. We also used artificial neural networks (ANN) to propose predictive models based on the experimental results. The ANN models were very accurate, such that the mean absolute error (MAE) was less than 2% and the R2 was higher than 0.98.

9 September 2022 in Nanomaterials
Verified
Journal Article
Open access
PDF file
MNMathimurugan Natarajan
Mathimurugan Natarajan
VVV. Vaishnav
V. Vaishnav
RKR. Praveen Kumar
R. Praveen Kumar
PBP. Boobalan
P. Boobalan
NNNandha Nandha
Nandha Nandha
Hadee Mohammed NajmHadee Mohammed Najm
Hadee Mohammed Najm
The development of aluminium composite with the inclusion of advanced materials is a continuous research process due to the increasing industrial demand for advanced hybrid materials. To cater for this need, this research work focuses on the development of Al 7075 alloy reinforced with TiB2 and graphene and on the evaluation of its strengthening mechanism. Two different modes of improving the strength of the hybrid composite have been followed; one is by the inclusion of graphene at three levels of 0.1, 0.2 and 0.3%, and another by the processing route, squeeze casting technique by compression of the molten hybrid composite slurry before casting. The microstructure and characterisation of the composite material are examined and analysed with the help of XRD, SEM, EDAX and chemical spectroscopy. A microstructure evaluation is employed to justify the homogenous dispersal and the existence of reinforced particles. A tensile test is conducted at room temperature and high temperature environments to assess the tensile strength. The research outcome affirms that a significant improvement in tensile and hardness has been noted in comparison with base alloy. The fracture-morphology results affirm the change in fracture mode from brittle to ductile when the tensile testing environment changes from room temperature to high temperature. Finally, the dispersion strengthening mechanism is validated with an empirical approach.

20 July 2022 in Sustainability
Verified
Journal Article
Open access
PDF file
Abdelaziz kadriAbdelaziz kadri
Abdelaziz kadri
KBKais Baouia
Kais Baouia
SKSamir Kateb
Samir Kateb
Nadhir Al-AnsariNadhir Al-Ansari
Nadhir Al-Ansari
SKSaber KOUADRI
Saber KOUADRI
KKKhaled Khedher
Khaled Khedher
Groundwater in the Touggourt region—or as its named, Oued Righ—in southeastern Algeria, is the only source of irrigation. To assess its suitability for agricultural purposes, we collected 72 samples from wells at this region, physical and chemical measurements were carried out for each water sample, and calculations of the sodium adsorption ratio (SAR), permeability index (PI), soluble sodium percent (SSP), residual sodium carbonate (RSC), magnesium hazard ratio (MHR) and Kelley’s ratio (KR) were carried out, as these indices are often used to assess the suitability of groundwater for irrigation uses. Based on the irrigation water quality index (IWQI) values, a spatial distribution map for each parameter using the inverse interpolation technique (IDW) was produced by Geographical Information System (GIS). According to the IWQI map, about 35% of the water samples analyzed fall into the Severe Restriction category (SR), making it unsuitable for irrigation under normal circumstance. Again, the remaining 65% of the groundwater has a high restriction (HR) for use. Groundwater in the study area could be used for irrigation in highly permeable soils where salt-tolerant crops are grown. Adequate drainage and continuous monitoring of water quality are recommended.

17 June 2022 in Buildings
Verified
Journal Article
Open access
PDF file
Hadee Mohammed NajmHadee Mohammed Najm
Hadee Mohammed Najm
AIAmer Ibrahim
Amer Ibrahim
MSMohanad Sabri
Mohanad Sabri
Amer HassanAmer Hassan
Amer Hassan
SMSamadhan Morkhade
Samadhan Morkhade
KKKhaled Khedher
Khaled Khedher
In recent years, steel-concrete composite shear walls have been widely used in enormous high-rise buildings. Due to their high strength and ductility, enhanced stiffness, stable cycle characteristics and large energy absorption, such walls can be adopted in auxiliary buildings, surrounding the reactor containment structure of nuclear power plants to resist lateral forces induced by heavy winds and severe earthquakes. The current study aims to investigate the seismic behaviour of composite shear walls and evaluate their performance in comparison with traditional reinforced concrete (RC) walls when subjected to cyclic loading. A three-dimensional finite element model is developed using ANSYS by emphasising constitutive material modelling and element type to represent the real physical behaviour of complex shear wall structures. The analysis escalates with parametric variation in reinforcement ratio, compressive strength of the concrete wall, layout of shear stud and yield stress of infill steel plate. The modelling details of structural components, contact conditions between steel and concrete, associated boundary conditions and constitutive relationships for the cyclic loading are explained. The findings of this study showed that an up to 3.5% increase in the reinforcement ratio enhanced the ductility and energy absorption with a ratio of 37% and 38%, respectively. Moreover, increasing the concrete strength up to 55 MPa enhanced the ductility and energy absorption with ratios of 51% and 38%, respectively. Thus, this improves the contribution of concrete strength, while increasing the yield stress of steel plate (to 380 MPa) enhanced the ductility (by a ratio of 66%) compared with the reference model. The present numerical research shows that the compressive strength of the concrete wall, reinforcement ratio, layout of shear stud and yield stress of infill steel plate significantly affect ductility and energy absorption. Moreover, this offers a possibility for improving the shear wall’s capacity, which is more important.