Multiple-input multiple-output (MIMO) antennas with four and eight elements having connected grounds are designed for ultra-wideband applications. Careful optimization of the lines connecting the grounds leads to reduced mutual coupling amongst the radiating patches. The proposed antenna has a modified substrate geometry and comprises a circular arc-shaped conductive element on the top with the modified ground plane geometry. Polarization diversity and isolation are achieved by replicating the elements orthogonally forming a plus shape antenna structure. The modified ground plane consists of an inverted L strip and semi ellipse slot over the partial ground that helps the antenna in achieving effective wide bandwidth spanning from (117.91%) 2.84–11 GHz. Both 4/8-port antenna achieves a size of 0.61 λ × 0.61 λ mm² (lowest frequency) where 4-port antenna is printed on FR4 substrate. The 4-port UWB MIMO antenna attains wide impedance bandwidth, Omni-directional pattern, isolation >15 dB, ECC < 0.015, and average gain >4.5 dB making the MIMO antenna suitable for portable UWB applications. Four element antenna structure is further extended to 8-element configuration with the connected ground where the decent value of IBW, isolation, and ECC is achieved.

This research reports a four-port multiple-input-multiple-output (MIMO) antenna designed for 5G-NR band applications including n77: 3.30–4.20 GHz, n78: 3.30–3.80 GHz, and n79: 4.40–5.00 GHz. The proposed design is analyzed in two parts, one single-element asymmetrical fed Calendula flower-shaped antenna and the other four-port modified MIMO antenna with the connected ground. The evolution of the MIMO antenna is studied based on the characteristics and optimized single-element antenna. The measured 5G-NR bandwidth offers a very high matching of impedance for MIMO configuration and higher isolation in the same band. The MIMO antenna offers an average peak gain of 3.51 dBi with a radiation efficiency of more than 90%. The radiation patterns plotted at 3.51, 4.00, 4.50, and 5.00 GHz match with almost omni-directional and dipole patterns in H- and E-radiating planes respectively. The MIMO antenna also records good diversity performance (ECC, DG, CCL, MEG, and TARC) in n77, n78, and n79 5G bands.

A novel compact fractal loaded two- and eight-element multiple input multiple output (MIMO) with strong diversity is designed for 5G Sub 6 GHz and WLAN applications. The suggested antenna is designed and manufactured on inexpensive FR4 dielectric material with small size of 72 mm × 72 mm × 1.6 mm (0.792λ × 0.792λ × 0.0176λ, where λ is calculated at a lower operating frequency). The proposed layout features a partially grounded, protruding T-shaped stub on the underside of the substrate and a set of fractally loaded circular patch antenna elements on the top. Four triangular slots on the substrate and a T-shaped stub on the ground are employed to produce good isolation over the intended bands. The proposed antenna has a frequency range of (3.3–6.0) GHz, making it compatible with the 5G sub-6 GHz bands and the WLAN band thanks to its high isolation of above 15 dB and good impedance matching characteristics. Good agreement is observed between the antenna results and the theory of characteristic mode analysis approach. The designed antenna is well suited for 5G sub-6 GHz and WLAN communication applications due to its low ECC (0.005), total active reflection coefficient (TARC) (−10 dB), mean effective gain (MEG) (−3 dB), and diversity gain (DG) (−10 dB), channel capacity losses (CCL) (0.05), peak gain (>2.5 dBi), radiation efficiency (>95%), and stable boresight radiation patterns.

A novel compact-slotted four element multiple input multiple output (MIMO) planar monopole antenna is proposed for 5G mmWave N257/N258 and N262 band applications. The antenna, with dimensions of 12 mm × 11.6 mm × 0.508 mm ($1.036{\lambda }_o \times$$1.001{\lambda }_o\times 0.043{\lambda }_o$ where ${\lambda }_o$ is computed at lowest cutoff frequency), is fabricated on a Rogers RT/duroid 5880 (tm) substrate with a relative permittivity of 2.2 and a dielectric loss tangent of 0.0009. The suggested antenna consists of four U-shaped radiating elements (patches) on top of the dielectric material and a slotted ground on the bottom. The radiating elements are fed by a 50-ohm microstrip line feed. To improve the impedance performance of the MIMO antenna, a rectangular strip of 1.3 mm × 0.2 mm and a couple of rectangular slots are added to each radiating element. The first operating band at 27.1 GHz, ranging from 25.9 GHz to 27.8 GHz, is achieved by using slotted U-shaped radiating elements. The second operating band at 48.7 GHz, ranging from 47.1 GHz to 49.9 GHz, is obtained by etching hexagonal slots on the ground. The antenna design achieves an isolation of >27 dB through the orthogonal positioning of radiating elements and slots on the ground. The designed antenna operates at 27 GHz (N257/N258) and 48.7 GHz (N262) bands, exhibiting stable radiation patterns, a peak gain of >5.95 dBi, radiation efficiency of >90%, an envelope correlation coefficient of <10⁻⁶, a total active reflection coefficient of ≤−10 dB, channel capacity losses of <0.03 bits/s/Hz, and a mean effective gain of ≤−3 dB. The simulated and measured results of the antenna show good agreement, making it well-suited for 5G mmWave communication applications.