We report design and synthesis of polymer-based large-area superhydrophobic carbon nanofiber (CNF) composite coatings for tunable electromagnetic interference shielding and attenuation in the terahertz (THz) frequency regime. Such coatings with different CNF/polymer weight ratios are characterized by a frequency domain THz spectroscopy system. A maximum THz shielding effectiveness of was measured in the examined frequency range of 570–630 GHz. Coating attenuation level varied with CNF loading. Two-dimensional distributions of power attenuation at 600 GHz showed good spatial uniformity. The present composite coatings, in addition to their self-cleaning property, have high potential for advanced technology high-frequency applications.
We report optical modulation of continuous terahertz (THz) wave in the frequency range of 570-600 GHz using photo-induced reconfigurable patterns on a silicon wafer. The patterns were implemented using programmable illumination from a commercially-available digital light processing (DLP) projector. A modulation depth of 20 dB at 585 GHz has been demonstrated. Modulation speed measurement shows a 3-dB bandwidth of ~1.3 kHz which is primarily limited by the DLP system. A photo-induced polarizer with tunable polarization angle has been demonstrated, showing a 3-dB extinction ratio. Reconfigurable aperture-arrays (4 x 4 pixels) have been attempted for room-temperature coded-aperture imaging using a single Schottky diode detector at 585 GHz. We envision that this technique will provide a simple but powerful means to realize a variety of cost-effective reconfigurable quasi-optical THz circuits and components.
Photo‐induced coded‐aperture imaging (PI‐CAI) based on compressed sensing (CS) at 590 GHz using a WR‐1.5 (500–750 GHz) vector network analyser is demonstrated. For a 256‐pixel (16 × 16) frame, the acquisition time can be reduced by 40%, as compared with PI‐CAI without CS, while maintaining high imaging quality. On the basis of this approach, it is envisioned that real‐time (26 fps) THz imaging with 1000 pixels (32 × 32) can be realised using high‐speed digital micromirror device chipsets and optimised data‐acquisition software.
24 April 2018 in IEEE Microwave and Wireless Components Letters
We report the design, fabrication, and characterization of a high-performance optically controlled WR-4.3 variable attenuator. The attenuation is based on the interaction between the incident waves and photogenerated free carriers inside an E-plane micromachined silicon absorber. Tuning is realized by illuminating the silicon with different light intensities using three 808-nm infrared laser diodes. Measurement results show that an average attenuation range of 60 dB, a 0.7-dB insertion loss, and a greater than 15-dB return loss have been achieved over the entire WR-4.3 band. In addition, a 3-dB modulation bandwidth of 350 kHz has been obtained experimentally. Initial thermal stability test of the device has also been performed, with less than 0.4-dB amplitude drift and 2° drift in phase over 30-min demonstration.
Owing to the unprecedented development in terahertz (THz) sources and detectors in the last decade, technologists and researchers have intensified their efforts to develop advanced THz sensing and imaging systems with superior performance and unique functionalities. One of the key elements to realize such systems is the ability to monolithically integrate high-performance semiconductor devices with THz antennas and other passive structures. In recent years, devices based on interband tunneling in III-V heterostructures have emerged as promising candidates for THz detection that offer extremely high nonlinearity, high sensitivity, low noise, fast response, and room temperature operation. In this paper, we first review the development of heterostructure backward tunnel diodes (HBDs) in the InAs/AlSb/AlGaSb material system that have been demonstrated with detection sensitivity that outperforms the current state of the art (e.g., the fundamental limit of Schottky diodes) and with noise-equivalent power (NEP) below 0.2 pW/Hz½. We then present the monolithic integration of HBDs with planar folded dipole antennas (FDAs) using submicrometer-scale airbridges to achieve optimized impedance matching for high-performance and compact THz detectors and focal-plane array (FPA) imaging systems. In addition, the potential of using HBDs for realizing THz systems with advanced functionalities such as spectroscopic FPAs (using frequency-tunable THz antennas) and polariametric detection/imaging systems will be discussed. Finally, the integration of HBDs into waveguides for more advanced THz sensing and imaging (e.g., a six-port reflectometer for near-field imaging) will be discussed.
We first review the development of a frequency domain quasi-optical terahertz (THz) chemical sensing and imaging platform consisting of a quartz-based microfluidic subsystem in our previous work. We then report the application of this platform to sensing and characterizing of several selected liquid chemical samples from 570–630 GHz. THz sensing of chemical mixtures including isopropylalcohol-water (IPA-H2O) mixtures and acetonitrile-water (ACN-H2O) mixtures have been successfully demonstrated and the results have shown completely different hydrogen bond dynamics detected in different mixture systems. In addition, the developed platform has been applied to study molecule diffusion at the interface between adjacent liquids in the multi-stream laminar flow inside the microfluidic subsystem. The reported THz microfluidic platform promises real-time and label-free chemical/biological sensing and imaging with extremely broad bandwidth, high spectral resolution, and high spatial resolution.