This work describes a new procedure aimed to semi-automatically identify clusters of active persistent scatterers and preliminarily associate them with different potential types of deformational processes over wide areas. This procedure consists of three main modules: (i) ADAfinder, aimed at the detection of Active Deformation Areas (ADA) using Persistent Scatterer Interferometry (PSI) data; (ii) LOS2HV, focused on the decomposition of Line Of Sight (LOS) displacements from ascending and descending PSI datasets into vertical and east-west components; iii) ADAclassifier, that semi-automatically categorizes each ADA into potential deformational processes using the outputs derived from (i) and (ii), as well as ancillary external information. The proposed procedure enables infrastructures management authorities to identify, classify, monitor and categorize the most critical deformations measured by PSI techniques in order to provide the capacity for implementing prevention and mitigation actions over wide areas against geological threats. Zeri, Campiglia Marittima–Suvereto and Abbadia San Salvatore (Tuscany, central Italy) are used as case studies for illustrating the developed methodology. Three PSI datasets derived from the Sentinel-1 constellation have been used, jointly with the geological map of Italy (scale 1:50,000), the updated Italian landslide and land subsidence maps (scale 1:25,000), a 25 m grid Digital Elevation Model, and a cadastral vector map (scale 1:5000). The application to these cases of the proposed workflow demonstrates its capability to quickly process wide areas in very short times and a high compatibility with Geographical Information System (GIS) environments for data visualization and representation. The derived products are of key interest for infrastructures and land management as well as decision-making at a regional scale.

Coastal environments are dynamic ecosystems, constantly subject to erosion/accretion processes. Erosional trends have unfortunately been intensifying for decades due to anthropic factors and an accelerated sea level rise might exacerbate the problem. It is crucial to preserve these areas for safeguarding not only coastal ecosystems and cultural heritage, but also the population living there. In this context, monitoring coastal areas is essential and geomatics techniques, especially satellite remote sensing imagery, might prove very advantageous. In this paper, a semi-automatic methodology to extract shorelines from SAR (Synthetic Aperture Radar) Sentinel-1 and optical Sentinel-2 satellite images was developed. An experimental algorithm, called J-Net Dynamic, was tested in two pilot sites. The semi-automatic methodology was validated with GNSS (Global Navigation Satellite System) reference shorelines and demonstrated to be a powerful tool for a robust extraction of the shoreline both from optical and SAR images. The experimental algorithm was able to extract the shoreline closer to the reference with SAR images on the natural beach of Castelldefels and it was demonstrated to be less sensitive to speckle effects than the commonly used Canny Edge Detector. Using the SAR images of the urban beach of Somorrostro, the Canny detector was not able to extract the shoreline, while the new algorithm could do it but with low accuracy because of the noise induced by man-made structures. For further investigation, the Sentinel-2-extracted shorelines were also compared to the ones extracted by a state-of-the-art tool, CoastSat, in the two beaches using both automatic and manual thresholds. The mean errors obtained with J-Net Dynamic were generally higher than the ones from CoastSat using the manual threshold but lower if using the automatic one. The proposed methodology including the J-Net Dynamic algorithm proves to extract the shorelines closer to the reference in most of the cases and offers the great advantage of being able to work with both optical and SAR images. This feature could allow to reduce the time lag between satellite derived shorelines paving the way to an enhanced monitoring and management of coastal areas.

Early alarm systems can activate vital precautions for saving lives and the economy threatened by natural hazards and human activities. Interferometric synthetic aperture radar (InSAR) products generate valuable ground motion data with high spatial and temporal resolutions. Integrating the InSAR products and forecasting models make possible to set up early alarm systems to monitor vulnerable areas. This study proposes a technical support to early warning detection tools of ground instabilities using machine learning and InSAR time series that is capable of forecasting regions affected by potential collapses. A long short-term memory (LSTM) model is tailored to predict ground movements in three forecast ranges (i.e., SAR observations): 3, 4, and 5 multistep. A contribution of the proposed strategy is utilizing adjacent time series to decrease the possibility of falsely detecting safe regions as significant movements. The proposed tool offers ground motion-based outcomes that can be interpreted and utilized by experts to activate early alarms to reduce the consequences of possible failures in vulnerable infrastructures, such as mining areas. Three case studies in Spain, Brazil, and Australia, where fatal incidents happened, are analyzed by the proposed early alert detector to illustrate the impact of chosen temporal and spatial ranges. Since most early alarm systems are site dependent, we propose a general tool to be interpreted by experts for activating reliable alarms. The results show that the proposed tool can identify potential regions before collapse in all case studies. In addition, the tool can suggest an optimum selection of InSAR temporal (i.e., number of images) and spatial (i.e., adjacent measurement points) combinations based on the available SAR images and the characteristics of the study area.

Coastal environments are facing constant changes over time due to their dynamic nature and geological, geomorphological, hydrodynamic, biological, climatic and anthropogenic factors. For these reasons, the monitoring of these areas is crucial for the safeguarding of the cultural heritage and the populations living there. The focus of this paper is shoreline extraction by means of an experimental algorithm, called J-Net Dynamic (Semeion Research Center of Sciences of Communication, Rome, Italy). It was tested on two types of image: a very high resolution (VHR) multispectral image (WorldView-2) and a high resolution (HR) radar synthetic aperture radar (SAR) image (Sentinel-1). The extracted shorelines were compared with those manually digitized for both images independently. The results obtained with the J-Net Dynamic algorithm were also compared with common algorithms, widely used in the literature, including the WorldView water index and the Canny edge detector. The results show that the experimental algorithm is more effective than the others, as it improves shoreline extraction accuracy both in the optical and SAR images.

Displacement time series (TS) provides temporal and spatial information related to ground deformation. This study aims to investigate temporal behavior of ground deformation TS, including classification of displacement trends and periodicity evaluation, which ease the interpretation of movements. To this end, we propose several modifications to an existing automatic classification workflow of Persistent Scatterers Interferometry (PSI) TS using new tests to classify ground deformations into seven main trends: Stable, Linear, Quadratic, Bilinear, Phase Unwrapping Errors (PUE), Discontinuous with constant and different velocities. We illustrate our approach over 1500 km² of the Granada region and the metropolitan area of Barcelona, which were monitored using Sentinel-1 images and a PSI technique. This study provided the spatial distribution of different ground movement types and was useful to detect several TS anomalies due to PUE. The proposed approach also identified stable targets, which were wrongly classified as moving scatterers by the existing classification method. A periodicity analysis was finally performed using the Welch’s power spectral density estimator to investigate seasonal and yearly fluctuations. The method was validated using simulated data, where the classified TSs characterized by probable phase unwrapping errors were verified by PSI experts. The overall classification accuracy was 77.8%, indicating that the proposed method has a considerable TS classification potential.

This work addresses a methodology based on the interferometric synthetic aperture radar (InSAR) applied to analyze and monitor ground-motion phenomena induced by underground mining activities in the Legnica-Glogow copper district, south-western Poland. The adopted technique employs an InSAR processing chain that exploits a stack of Sentinel-1 synthetic aperture radar (SAR) images using a small baseline multitemporal approach. Interferograms with small temporal baselines are first selected, then their network is optimized and reduced to eliminate noisy data, in order to mitigate the effect of decorrelation sources related to seasonal phenomena, i.e., snow and vegetation growth, and to the radar acquisition geometry. The atmospheric disturbance is mitigated using a spatio-temporal filter based on the nonequispaced fast Fourier transform. The estimated displacement maps and time series show the effect of both linear and impulsive ground motion and are validated against global navigation satellite system (GNSS) measurements. In this context, a significant threat to the built environment is represented by seismic tremors triggered by underground mining activities, which are analyzed using the proposed method to integrate the information gathered by in situ seismometer devices.