15 September 2023 in IEEE Transactions on Electron Devices
The self-heating effect (SHE) is a critical issue in nanoscale fin field effect transistors (FinFETs) that has emerged as an essential concern for device reliability. In physical circuit operations, devices generally suffer from mixed-mode hot carrier degradation (HCD) and bias temperature instability (BTI) stress conditions. The transient SHE at the HCD stage affects the BTI, resulting in an inadequacy of existing aging models. In this article, we develop an accurate transient self-heating model and incorporate it into a mixed-mode HCD-BTI reliability aging prediction framework. The transient SHE on the reliability of nanoscale p-type FinFETs are revealed thoroughly with experimental characterizations and accurate modeling. Circuit aging simulations with the developed transient SHE-aware aging prediction framework are presented. These results enable a more accurate reliability evaluation in state-of-the-art circuit designs.
4 May 2022 in IEEE Transactions on Electron Devices
A unified model for multigate negative capacitance transistors with self-heating effects (SHEs) is developed. With a metal–ferroelectric–insulator–semiconductor (MFIS) structure, thermal effects result in different temperature rises in the channel and ferroelectric layer. A gate control equation for the double-gate and gate-all-around MFIS structures is developed, on top of which both the current–voltage and charge–voltage characteristics are covered. The formulations describe dependences of ferroelectric layer thickness, with backward compatibility for MOSFETs. A unified thermal network is then proposed for SHE, capturing the essential physics of couplings between ferroelectric temperature and conduction current. The model has been verified with TCAD simulations and implemented for circuit simulations.
18 September 2024 in IEEE Transactions on Electron Devices
A compact electrothermal model of vertical gate-all-around (VGAA) transistors is developed in this work. Owing to the structural asymmetry inherent in VGAA devices, the internal thermal conduction of such devices differs from that of lateral gate-all-around (LGAA) transistors. The self-heating effect (SHE) of VGAA and thermal optimization is investigated through numerical simulation, revealing a 53% decrease in the temperature rise by changing the spacer material from SiO2 to Si3N4. In addition, a physics-based thermal model with geometry dependence is demonstrated, which captures the four-stage temperature traces of VGAA and supports technology optimization. The physics-based thermal model was verified through TCAD simulation and was subsequently employed to assess the electrothermal performance at the device-circuit level.
12 June 2023 in IEEE Transactions on Electron Devices
A physics-based SPICE model for dopant segregated tunneling field-effect transistors (DS-TFETs) with gate-to-drain underlap is developed for the design technology co-optimization (DTCO) of TFETs with the foundry process. It captures all the current components in full operation regions, including band-to-band tunneling (BTBT), forward p-i-n diode, gate leakage, and also ambipolar conduction. The channel surface potential is formulated first, with which the current expressions are derived and verified with experiments calibrated TCAD simulations. Model predictions of current, conductance, and voltage transfer characteristic (VTC) are in good agreement with measurement data of hardware devices (nTFET and pTFET) as well as circuits. This model has been written in Verilog-A language and employed in the TFET circuits design.
14 October 2022 in IEEE Transactions on Electron Devices
This work develops a model of the temperature and resistance for the RESET of confined phase change memory (PCM). The confined PCM, unlike the mushroom type, has heating inside the cell and higher resistance sensitivity to active region size. The ideal temperature profile is derived from a steady-state heat conduction formulation based on a quasi-3D approach. A thermal subcircuit is then proposed to implement the heating module, considering the thermoelectric effect (TEE) and temperature dependence of phase change materials, to obtain the active region size. The resistance of the irregular active region is then calculated using an integral method. Calibrated TCAD simulations and experimental data are used to verify the model with desired scalability and accuracy.