Gabriel Fernando García Sánchez

Mr. Gabriel Fernando García Sánchez

orcid

Research Focus & Metrics

Academic Career Length

9Years (2018-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 January 2019 in Cogent Engineering
Verified
Journal Article
Open access
Gabriel Fernando García SánchezGabriel Fernando García Sánchez
Gabriel Fernando García Sánchez
RGRolando Guzman
Rolando Guzman
ARAdriana Restrepo-Osorio
Adriana Restrepo-Osorio
EAEmil Hernández Arroyo
Emil Hernández Arroyo
Bio-insulations have gained great interest in recent years due to their potential to reduce energy consumption without negative environmental impacts. Fique is one of the most important crops in Colombia, it has shown a low thermal conductivity which makes it a potential replacement for the common insulation materials. However, there are few works that study its thermal properties. In order to enhance the understanding of fique as thermal insulation, in this paper a morphological analysis of raw fique fibers and Thermogravimetry (TGA) and Differential Scanning Calorimetry (DSC) tests of three fique samples are presented, namely, natural fique without treatment, fique washed with a commercial softener and fique after having been soaked for 24 hours in the same softener.

1 September 2020 in Respuestas
Verified
Journal Article
Open access
Gabriel Fernando García SánchezGabriel Fernando García Sánchez
Gabriel Fernando García Sánchez
JCJorge Chacón-Velasco
Jorge Chacón-Velasco
DFDavid Fuentes-Díaz
David Fuentes-Díaz
JJJulian Jaramillo
Julian Jaramillo
JMJairo Martínez-Morales
Jairo Martínez-Morales
Combustion is the main method of converting biomass to energy, either by direct heating systems or by boilers. By means of CFD models, it is possible to optimize the behavior of those systems and improve significantly its performance, without incurring the economic and environmental cost of experimental studies. However, modelling of biomass combustion is a complex process that requires a large number of sub-models and computational resources for a detailed description, therefore, different approaches have been developed which depend on the system and simulation objective. In this work, a review of the state of art of modelling of solid biomass combustion in the last years is presented, including classification, description and analysis of several of the main models about the subject.

5 July 2021 in Sustainability
Verified
Journal Article
Open access
PDF file
Gabriel Fernando García SánchezGabriel Fernando García Sánchez
Gabriel Fernando García Sánchez
RGRolando Guzman
Rolando Guzman
Roberto Alonso Gonzalez-LezcanoRoberto Alonso Gonzalez-Lezcano
Roberto Alonso Gonzalez-Lezcano
Buildings consume a large amount of energy during all stages of their life cycle. One of the most efficient ways to reduce their consumption is to use thermal insulation materials; however, these generally have negative effects on the environment and human health. Bio-insulations are presented as a good alternative solution to this problem, thus motivating the study of the properties of natural or recycled materials that could reduce energy consumption in buildings. Fique is a very important crop in Colombia. In order to contribute to our knowledge of the properties of its fibers as a thermal insulator, the measurement of its thermal conductivity is reported herein, employing equipment designed according to the ASTM C 177 standard and a kinetic study of its thermal decomposition from thermogravimetric data through the Coats–Redfern model-fitting method.

22 March 2023 in Energies
Verified
Journal Article
Open access
PDF file
Gabriel Fernando García SánchezGabriel Fernando García Sánchez
Gabriel Fernando García Sánchez
JVJorge Luis Chacon Velasco
Jorge Luis Chacon Velasco
DDDavid Alfredo Fuentes Díaz
David Alfredo Fuentes Díaz
YRYesid Rueda-Ordóñez
Yesid Rueda-Ordóñez
David PatiñoDavid Patiño
David Patiño
JMJairo René Martínez Morales
Jairo René Martínez Morales
Combustion is the most commonly used technology to produce energy from biomass; nevertheless, there are still thermal efficiency problems in current biomass combustion furnaces and a lack of knowledge about the properties of residual biomasses that could be used as fuels. Aiming to contribute to knowledge of the potential of residual biomass for energy generation, this work reports on the implementation of a 2D computational model to study the combustion performance of several solid biomass fuels, and its application in the analysis of Lippia origanoides bagasse combustion. The model uses an Eulerian–Lagrangian approach; in the continuous phase, governing equations are solved, and in the dispersed phase, particles are tracked and the mass, momentum, species and energy transfer between the phases are calculated. The model was validated against experimental data from a combustor fueled by three biomasses: wood pellets, olive stone and almond shell. The results show deviations of less than 13%, with few exceptions, which indicates a good degree of agreement with experimental measurements compared with those reported by other studies on the subject. Furthermore, it was found that the stems of Lippia origanoides bagasse show similar performance to that of other biomass used as solid fuel, while the leaves present lower performance.

26 February 2018 in Revista UIS Ingenierías
Verified
Journal Article
Open access
U(Universidad Pontificia Bolivariana (Upb)
Universidad Pontificia Bolivariana (Upb)
Gabriel Fernando García SánchezGabriel Fernando García Sánchez
Gabriel Fernando García Sánchez
JVJorge Luis Chacon Velasco
Jorge Luis Chacon Velasco
USUniversidad Industrial de Santander
Universidad Industrial de Santander
ACArlex Chaves-Guerrero
Arlex Chaves-Guerrero
UAUniversidad de Antioquia
Universidad de Antioquia

26 February 2024 in INGENIERÍA Y COMPETITIVIDAD
Verified
Journal Article
Open access
PDF file
Gabriel Fernando García SánchezGabriel Fernando García Sánchez
Gabriel Fernando García Sánchez
JVJorge L. Chacón Velasco
Jorge L. Chacón Velasco
DDDavid A. Fuentes Díaz
David A. Fuentes Díaz
To develop biomass combustion as a viable renewable energy source it is necessary to improve the furnace efficiency and investigate the potential of agricultural wastes as fuels. Computational Fluid Dynamics (CFD) modeling is a valuable tool to accomplish these objectives, OpenFOAM is a powerful open-source CFD software that has been little used in this type of application. This paper reports the study of combustion in a device of great importance for Colombia, the panela furnace, using a model developed in OpenFOAM. The combustion chamber of a Ward-Cimpa furnace, measuring 2.68 m in width and 3.32 m in height was modeled. This model was validated, by comparing the simulated values of CO and temperature at the furnace exit with data taken from literature, resulting in differences of 13.72 % and 12.23 % respectively. These discrepancies are slightly lower than those reported in other studies about the subject. The model was employed to analyze the effect of the air-flow rate on the combustion performance. The findings indicate that the increase in air-flow causes an increase in combustion activity manifested in higher temperature and CO2 emissions, which could indicate that in common operational conditions, the furnace operates under deficient air conditions and its performance could be improve by using higher air flow rates. Para desarrollar la combustión de biomasa como fuente viable de energía renovable es necesario mejorar la eficiencia de los hornos e investigar el potencial de los desechos agrícolas como combustibles. El modelado de dinámica de fluidos computacional (CFD) es una herramienta valiosa para lograr estos objetivos; OpenFOAM es un potente software CFD de código abierto que ha sido poco utilizado en este tipo de aplicaciones. Este artículo reporta el estudio de la combustión en un dispositivo de gran importancia para Colombia, el horno de panela, utilizando un modelo desarrollado en OpenFOAM. Se modeló la cámara de combustión de un horno Ward-Cimpa, que mide 2,68 m de ancho y 3,32 m de alto. Este modelo fue validado comparando los valores simulados de CO y temperatura a la salida del horno con datos tomados de la literatura, arrojando diferencias de 13,72 % y 12,23 % respectivamente. Estas discrepancias son ligeramente menores que las reportadas en otros estudios sobre el tema. El modelo se empleó para analizar el efecto del caudal de aire sobre el rendimiento de la combustión. Los hallazgos indican que el aumento en el flujo de aire provoca un aumento en la actividad de combustión que se manifiesta en una mayor temperatura y emisiones de CO2, lo que podría indicar que en condiciones operativas comunes, el horno opera en condiciones de aire deficientes y su rendimiento podría mejorarse utilizando mayor cantidad de aire. caudales.