The laser-arc hybrid welding is widely used in many industries through the combination of advantages found in welding technologies used in this single process. A significant issue is the determination of the influence of heat source power distribution on welding deformations generated at the interface of joined elements and adjacent zones. Numerical estimation of welding deformations is very important and allows for the proper selection of technological parameters as well as the prediction of welded joints quality. This work concerns numerical simulation of thermomechanical phenomena in hybrid welding of sheets made of X5CRNI18-10 steel using laser beam and electric arc heat sources. Three dimensional discrete model is created in Abaqus FEA in order to estimate welding deformations generated by temperature field in the joint. Additional numerical subroutine is created in Abaqus/Standard module in which the distribution of movable hybrid heat source is implemented. The shape and size of the fusion zone is determined on the basis of numerically obtained temperature field as well as welding deformations occurring in hybrid butt-welded joints.
Numerical analysis of thermal treatment processes is an important issue to be considered by contemporary laboratories dealing with industrial designing in general. Phenomena associated with heat treatment are complex and not yet adequately explained. Improvement in this field of numerical solutions is particularly forced by industry which, striving for deployment of state of the art technologies and reduction of costs, is demanding continuous enhancement of tool thermal treatment. Phase transformations, in particular in cooling processes, involve considerable changes in kinetics that are not always associated with external thermal impact. Analyses of experimental data allowed developing many mathematical models to measure volume fractions of phase transformations in solid state. The Johnson-Mehl Avrami equation and generalised Kolmogorov equation are the two primary models applied in almost all tests evaluating transformation of austenite into ferrite, bainite and martensite. In order to calculate the martensitic phase volume fraction, usually the Koistinen-Marburger equation, or any of its modified formulas, are used.
1 December 2013 in Archives of Metallurgy and Materials
Praca dotyczy modelowania numerycznego i symulacji komputerowej zjawisk termomechanicznych towarzyszących proce- sowi spawania spiralnego rur ze stali nierdzewnej X5CrNi 18-10 przy wykorzystaniu wiązki laserowej. Bazując na oprogramowa- niu Abaqus FEA wykonano analizę numeryczną 3D. Rozkład mocy źródła ciepła poruszającego się spiralnie implementowano w dodatkowej procedurze DFLUX napisanej w języku programowania Fortran. W analizie uwzględniono zmienne własności termomechaniczne stali. Badano efektywność przetapiania materiału różnymi typami źródeł spawających oraz wpływ obciążenia cieplnego na kształt strefy przetopienia, deformacje spawanych rur i naprężenia spawalnicze
The paper presents a numerical model based on the finite element method (FEM) to predict deformations and residual stresses in socket welding of different diameter stainless steel pipes made of X5CrNi18-10 steel. The next part of the paper concerns the determination of strength properties of a welded joint in terms of a shear test. A thermo-elastic–plastic numerical model is developed using Abaqus FEA software in order to determine the thermal and mechanical phenomena of the welded joint. This approach requires the implementation of moveable heat source power intensity distribution based on circumferentially moving Goldak’s heat source model. This model is implemented in the additional DFLUX subroutine, written in Fortran programming language. The correctness of the assumed model of thermal phenomena is confirmed by examinations of the shape and size of the melted zone. The strength of the welded joint subjected to shear is verified by performing a compression test of welded pipes as well as computer simulations with validation of the computational model using the Dantec 3D image correlation system.
The paper concerns the numerical analysis of the influence for three different of welding heat source inclinations on the weld pool shape and mechanical properties of the resulting joint. Numerical analysis is based on the experimental tests of single-side welding of two sheets made of X5CrNi18-10 stainless steel. The joint is made using a laser welding heat source. Experimental test was performed for one heating source inclination. As a part of the work metallographic tests are performed on which the quality of obtained joints are determined. Numerical calculations are executed in Abaqus FEA. The same geometrical model is assumed as in the experiment. Material model takes into account changing with temperature thermophysical properties of austenitic steel. Modeling of the motion of heating source is performed in additional subroutine. The welding source parameters are assumed in accordance with the welding process parameters. Numerical calculations were performed for three different inclinations of the source. One inclination is consistent with experimental studies. The performed numerical calculations allowed to determine the temperature field, shape of welding pool as well as deformations and stress state in welded joint. The obtained results are compared to results of the experiment.