The flux-switching permanent-magnet (FSPM) motor has been viewed as a highly reliable machine with both armature windings and magnets on the stator. Owing to the high torque-production capability with low torque ripple, FSPM motors with a higher number of phases are potential candidates for traction applications in hybrid electric vehicles (HEVs). However, existing research has mostly focused on the principles and static performance of multiphase FSPM motors, and little attention has been paid to advanced control strategies. In this paper, the fully decoupled current control of a 36/34-pole nine-phase FSPM (NP-FSPM) motor is developed and the performance under different operating conditions is investigated. The aim of the design is to alleviate cross coupling effects and unwanted low-order stator harmonic currents, to guarantee fast transient response and small steady-state error. In addition, its fault-tolerance is further elaborated. These features are very important in automotive applications where low torque pulsation, high fault-tolerant capability and high dynamic performance are of major importance. Firstly, the research status of multiphase FSPM motors is briefly reviewed. Secondly, the mathematical model in the dq reference frames and control strategies are presented. Then, the control and performance of the NP-FSPM motor are evaluated by using MATLAB/Simulink. Finally, experiments on an NP-FSPM motor prototype are carried out to validate the study.
12 August 2025 in IEEE Transactions on Industrial Electronics
Conventional deadbeat predictive current control (DPCC) has been widely recognized as a highly effective control method for permanent magnet synchronous motors (PMSMs), owing to its notable advantages including rapid transient response characteristics, easy implementation and high performance. However, the control performance of DPCC significantly deteriorates under parameter mismatcheses. To solve this critical problem, a robust incremental DPCC based on current error compensators is proposed. First, the incremental DPCC model is used to reduce the impact of motor flux linkage mismatch on the motor control system, and then the influence of inductance mismatch on the control performance of the motor is reduced by constructing the d- and q-axis current error compensators and the inductance disturbance terms. Furthermore, the inductance value of the motor is identified by the inductance disturbance term. Finally, the proposed method is experimentally demonstrated with a 3.8 kW motor.
In this paper, the design procedure and optimization process of a multi-phase flux-switching permanent magnet (FSPM) generator for wind power generation system is investigated. Two different optimization methods—stepwise optimization and global optimization—are implemented and applied to the optimization of the proposed nine-phase FSPM generator-based wind power system. Both the advantages and disadvantages of two optimization methods are compared and analyzed. The results indicate that the stepwise optimization can achieve good effects on individual optimization objectives, whereas the global optimization can not only achieve a good optimization effect on a single objective, but also can find design point on the Pareto front, which can effectively optimize different multi-objects. The electromagnetic performance of the nine-phase FSPM generator is verified by experiments on a prototyped machine and the measured results show that the proposed generator exhibits the favorable characteristics of high torque, low torque ripple, and high efficiency.
9 December 2024 in Journal of Electrical Engineering & Technology
In this paper, a lightweight permanent magnet in-wheel (LW-PMIW) motor is proposed. This research focuses on using a multi-modulation design to enhance the amplitude of the fundamental wave while suppressing high-order harmonics, thereby enabling the motor to achieve high output torque, a light weight, and a high efficiency. Firstly, a combined trade-off factor related to motor mass, losses, and torque is defined specifically to provide guidance for the design. Secondly, a dual-rotor structure is adopted, and a harmonic injection (HI) design is applied to the permanent magnets (PMs). By designing a targeted harmonic injection ratio coefficient, the non-working harmonics of the PM magnetomotive force (MMF) can be weakened. Then, two iron modulating blocks are introduced to asynchronously modulate the PM MMF, which can further enhance the fundamental amplitude and improve the distribution of the airgap magnetic field. Finally, to verify the effectiveness of the multi-modulation design, the electromagnetic performance of the motor is evaluated and analyzed. The analytical and simulation results show that the torque of the proposed motor can reach 35.4 Nm, which is an increase of 19.6% while the torque ripple remains unchanged compared with the initial motor. Meanwhile, the output power increased by 0.37 kW. Hence, the rationality and effectiveness of the motor design are verified.
1 July 2026 in IEEE Transactions on Industrial Electronics