Conventional deadbeat predictive current control (DPCC) is an efficient strategy for permanent magnet synchronous motors (PMSMs) due to the advantages of quick response, easy implementation and high performance. However, parameter mismatch will degrade the entire control system’s performance. To solve this problem, a robust DPCC based on current error compensation is proposed. The motor parameters are updated by calculating the relative terms of inductance and flux linkage of the motor system. The current error compensator is designed to obtain the compensation current and identify the inductance and flux linkage in real time. Finally, the robustness of the proposed method under parameter mismatch and the accuracy of parameter identification are verified by experiments.
12 August 2025 in IEEE Transactions on Industrial Electronics
Conventional deadbeat predictive current control (DPCC) has been widely recognized as a highly effective control method for permanent magnet synchronous motors (PMSMs), owing to its notable advantages including rapid transient response characteristics, easy implementation and high performance. However, the control performance of DPCC significantly deteriorates under parameter mismatcheses. To solve this critical problem, a robust incremental DPCC based on current error compensators is proposed. First, the incremental DPCC model is used to reduce the impact of motor flux linkage mismatch on the motor control system, and then the influence of inductance mismatch on the control performance of the motor is reduced by constructing the d- and q-axis current error compensators and the inductance disturbance terms. Furthermore, the inductance value of the motor is identified by the inductance disturbance term. Finally, the proposed method is experimentally demonstrated with a 3.8 kW motor.
Permanent magnet synchronous motors (PMSMs) have been widespread used in high-performance automation due to their superior control precision and energy efficiency. With the development of digital processors, deadbeat predictive control (DPC) has promising control strategy for PMSM drive systems. However, the performance of DPC is highly sensitive to inaccuracies in system parameters, while the system delay and total harmonic distortion can also significantly affect its control effectiveness. This paper presents a comprehensive review of the advantages of DPC strategies applied to PMSMs, as well as their limitations in practical applications. Several improvement approaches are also discussed, including parameter identification methods, robust control methods, and delay compensation methods. Finally, the paper explores future research trends in this field, highlighting potential directions for the development of predictive control in PMSM drive systems.
Facing the stringent demands of ultra-high pressure fuel injection systems on atomization quality and mixing efficiency, non-circular nozzle geometries have shown significant potential. Biodiesel, as a renewable alternative fuel, suffers from poor atomization due to its high viscosity, low volatility, and large surface tension, posing greater challenges for injector design. Among non-circular designs, the equilateral triangular orifice offers distinct advantages in promoting atomization of high-viscosity fuels and inducing jet axis-switching. This study demonstrates that such triangular nozzles under ultra-high pressure conditions exhibit intense turbulent vorticity at the outlet and distinctive cavitation development, which significantly affect the primary breakup of biodiesel. During spray development, a pronounced axis-switching behavior is observed, characterized by alternating spray cone angles between the major and minor axes. This phenomenon intensifies with higher injection pressure but is mitigated by increased ambient backpressure. The comparative analysis quantitatively establishes these macro–micro coupling characteristics over ultra-high injection pressures of 160–200 MPa, using fixed orifice lengths of 1.5 mm across exit cross-sectional areas ranging from 24,942 to 29,272 μm2. The axis-switching process is accompanied by vigorous air entrainment, which significantly enlarges the spray projected area, accelerates liquid breakup, and shortens penetration distance, collectively enhancing the mixing rate and uniformity of biodiesel with air. This work systematically investigates the atomization characteristics and axis-switching behavior of equilateral triangular orifices with varying side lengths when injecting biodiesel under ultra-high pressure conditions, providing an effective technical pathway for the active control of spray morphology and atomization enhancement of biodiesel.