In the context of the quest for the Organic Laser Diode, we present the multiscale fabrication process optimization of mixed-order distributed-feedback micro-cavities integrated in nanosecond-short electrical pulse-ready organic light-emitting diodes (OLEDs). We combine ultra-short pulsed electrical excitation and laser micro-cavities. This requires the integration of a highly resolved DFB micro-cavity with an OLED stack and with microwave electrodes. In a second challenge, we tune the cavity resonance precisely to the electroluminescence peak of the organic laser gain medium. This requires precise micro-cavity fabrication performed using e-beam lithography to pattern gratings with a precision in the nanometer scale. Optimal DFB micro-cavities are obtained with 300 nm thick hydrogen silsesquioxane negative-tone e-beam resist on 50 nm thin indium tin oxide anode exposed with a charge quantity per area (i.e., dose) of 620 µC/cm2, developed over 40 min in tetramethylammonium hydroxide diluted in water. We show that the integration of the DFB micro-cavity does not hinder the pulsed electrical operability of the device, which exhibits a peak current density as high as 14 kA/cm2.
We present and analyze a simple model based on six rate equations for an electrically pumped organic diode laser. The model applies to organic host-guest systems and includes Stoke-shifted reabsorption in a self-consistent manner. With the validated model for the Alq3:DCM host-guest system, we predict the threshold for short-pulse laser operation. We predict laser operation characterized by damped relaxation oscillations in the GHz regime and several orders of magnitude linewidth narrowing. Prospect for CW steady-state laser operation is discussed.
In the context of the quest for the organic laser diode, we address a key challenge to design and fabricate high-quality factor cavities compatible with electrical excitation of organic semiconductors. More precisely, we present the design of DFB micro-cavities for integration in organic laser diodes and their validation under optical pumping. To design high-quality factor mixed-order DFB micro-cavities, we consider the half- and quarter-wavelength multilayered system and use the optical waveguide analysis to quantify the effective indices of the high and low indices, and the matrix transfer method to calculate the reflectances. Matrices of DFB micro-cavities made from different doses and different grating periods were fabricated. We then identified those showing laser emission under optical pumping as an indication of optimal matching of their resonance wavelength with respect to the electroluminescence peak of the organic gain material. Potential applications of organic laser diodes deal with light communication, spectroscopy, sensors, and other applications where heterogenous integration is important.