In this paper, the optical and electrical pulse responses of an optimized high-speed organic light-emitting diode (OLED) is investigated as a function of the pulse duration. The original design is based on the coplanar waveguide electrodes that are implemented on a transparent and conductive oxide thin film. The designed electrodes with reduced serial resistances (13 $\Omega $ ) allow to maximize the pulse energy delivery and to feed the organic device with short electrical pulses of few nanoseconds for the first time. This is achieved by designing the electrodes to have 50- $\Omega $ characteristic impedance, thanks to microwave techniques, and by implementing small values of capacitance (4.5 pF). The experimental results demonstrate $\boldsymbol \mu $ -OLED electrical and optical responses to electrical excitation pulses as short as 2.5 ns, for the first time, and state-of-the-art current densities above 1.7 kA/cm 2 . Moreover, and rather unexpectedly, the developed characterization procedure to extract the reported results demonstrated the first direct measurement of the electroluminescence lifetime of organic materials in the nanosecond time scale.
3 November 2023 in IEEE Photonics Technology Letters
We present a broadband free space light communication system using high-speed organic light emitting diodes (OLEDs) as transmitters. Firstly, we report the design and bandwidth measurements of micro-OLEDs with active area of 40x40μm². For this OLED, a cut-off frequency up to 459 MHz is observed. Secondly, by applying Direct Current Optical Orthogonal Frequency Division Multiplexing (DCO-OFDM) with adaptive bit and energy loading techniques, a data rate of 2.85 Gb/s is achieved. The increase of bandwidth and throughput reported in the current work are attributed to the improvements at the material, device and transmission levels. At the material level, a low work function Calcium cathode and ALD encapsulation of OLED is considered. At the device level, the active area is reduced in size and the OLEDs thickness is optimized. At the transmission level, parameters such as bias voltage, modulation amplitude and clipping have been fine-tuned to obtain high data rate.
In this paper, we aim to theoretically and experimentally study an organic light emitting diode (OLED) in a planar microcavity. One important issue that should be considered is to find an optimal design for an OLED in a microcavity: on one hand, the OLED thickness needs to be adjusted to get resonance at the desired wavelength, on another hand, the location of the emitter dipoles with respect to the metal electrode has to be consistent with the antinode condition of the emission wavelengths. This latter is important to improve the efficiency of the standing wave within the OLED microcavity. In this paper, we provide a theoretical model and carried out experiments using a microcavity OLEDs to validate the proposed model. The theoretical model is based on a classical approach valid in the so-called weak-coupling regime, which is the working regime of the considered microcavity OLED. The spontaneous emission is described as an electric dipole and some examples with experimental data are discussed in order to validate the applied approach.
In the context of the quest for the Organic Laser Diode, we present the multiscale fabrication process optimization of mixed-order distributed-feedback micro-cavities integrated in nanosecond-short electrical pulse-ready organic light-emitting diodes (OLEDs). We combine ultra-short pulsed electrical excitation and laser micro-cavities. This requires the integration of a highly resolved DFB micro-cavity with an OLED stack and with microwave electrodes. In a second challenge, we tune the cavity resonance precisely to the electroluminescence peak of the organic laser gain medium. This requires precise micro-cavity fabrication performed using e-beam lithography to pattern gratings with a precision in the nanometer scale. Optimal DFB micro-cavities are obtained with 300 nm thick hydrogen silsesquioxane negative-tone e-beam resist on 50 nm thin indium tin oxide anode exposed with a charge quantity per area (i.e., dose) of 620 µC/cm2, developed over 40 min in tetramethylammonium hydroxide diluted in water. We show that the integration of the DFB micro-cavity does not hinder the pulsed electrical operability of the device, which exhibits a peak current density as high as 14 kA/cm2.