Innovative additive manufacturing processes for resilient and sustainable production will become even more important in the upcoming years. Due to the targeted and flexible use of materials, additive manufacturing allows for conserving resources and lightweight design enabling energy-efficient systems. While additive manufacturing processes were used in the past several decades mainly for high-priced individualized components and prototypes, the focus is now increasingly shifting to near-net-shape series production and the production of spare parts, whereby surface properties and the tribological behavior of the manufactured parts is becoming more and more important. Therefore, the present review provides a comprehensive overview of research in tribology to date in the field of additively manufactured components. Basic research still remains the main focus of the analyzed 165 papers. However, due to the potential of additive manufacturing processes in the area of individualized components, a certain trend toward medical technology applications can be identified for the moment. Regarding materials, the focus of previous studies has been on metals, with stainless steel and titanium alloys being the most frequently investigated materials. On the processing side, powder bed processes are mainly used. Based on the present literature research, the expected future trends in the field of tribology of additively manufactured components can be identified. In addition to further basic research, these include, above all, aspects of process optimization, function integration, coating, and post-treatment of the surfaces.
With the increasing challenges of climate change and scarce resources, the development of sustainable and energy-efficient technical systems is becoming increasingly important. In many applications, the friction losses occurring in contacts have a decisive influence on the overall efficiency. At this point, tribological contact optimization can make an important contribution to increasing the efficiency of technical systems. However, improvements are often associated with a considerable experimental effort. To reduce the development time, additional simulation models can be applied to predict the tribological behavior. This requires the closest possible approximation of the real contact within a numerical model. This paper presents a simulation approach for the time-dependent simulation of a cam–tappet contact. The simulation uses realistic operating conditions as they arise in the valve train of internal combustion engines. The influence of edge effects on the friction behavior is considered by a scaled calculation area and the influence of the surface roughness is investigated using stochastic asperity models. It is shown that the tribological behavior within the contact strongly depends on the surface properties and the load spectrum used. In addition, edge effects on the sides of the contact area have a clear influence on the pressure and film thickness distribution.
Metal material additive manufacturing (MEAM) has risen in interest in the last five years as an alternative to powder bed processes. MEAM is promising for generating shelled components with defined infill structures, making it very interesting for lightweight engineering. Atomic Diffusion Additive Manufacturing (ADAM) is a filament-based MEAM process patented by Markforged Inc. that provides a closed process chain from preprocessing to the final sintering of printed green parts. This study focuses on Inconel 625, which is of high interest in the aerospace industry, and assesses its dimensional accuracy and tensile properties regarding different print orientations and solid, triangular, and gyroid infill structures. The results showed that neither the dimensional accuracy nor the sintering shrinkage was significantly influenced by the printing orientation or the infill structure. In the context of lightweight engineering, the infill structures proved beneficial, especially within the elastic region. Generally, triangular infill patterns resulted in higher stiffness, while gyroids led to more ductile specimens. A mass-related evaluation of tensile testing elucidates that with the aid of the infill structures, weight savings of 40% resulted in mechanical performance decreasing by only 20% on average, proving its high potential for lightweight design.
Additive manufacturing is a potentially disruptive technology with a high impact on supply chains and part design. While generally allowing much higher degrees of freedom in design than formative and subtractive manufacturing techniques, the necessity of support structures can diminish the impact of additive manufacturing. This article presents a methodology based on finite spheres to integrate knowledge about process limitations into topology optimization for the direct extrusion-based additive manufacturing of parts with maximized stiffness and strength and minimized support structures. This methodology has been included within our self-developed Freeware Z88 Arion® V3. We investigated the impact of the manufacturing constraints on the additive manufacturing process regarding effective material usage on application test examples. The test results showed that the design proposals created while applying the finite spheres and two-step smoothing needed significantly less or no support material for all application examples.
To meet the demand for energy-efficient and, at the same time, durable, functional components, the improvement of tribological behavior is playing an increasingly important role. One approach to reducing friction in lubricated tribological systems is the microtexturing of the surfaces tailored to the application, but in most cases, this leads to increased manufacturing costs and thus often makes their use in industry more difficult. In this work, we, therefore, present an approach for an efficient design and fully integrated production process using a cam tappet as an example. For the used cam tappet contact, we first determined the optimal texture geometries using two differently complex EHL (elastohydrodynamic lubrication) simulation models. Based on these, textured tappets were manufactured in a combined manner using sheet-bulk metal-forming and deposition with a diamond-like-carbon (DLC) coating for additional wear protection without further post-processing of the coating. We show that the simulation approach used has a rather subordinate influence on the optimization result. The combined forming of components with textured surfaces is limited by the local material flow, the resulting texture distortion, and tool wear. However, a targeted process design can help to exploit the potential of single-stage forming. The applied DLC coating has good adhesion and can completely prevent wear in subsequent reciprocal pin-on-disc tests, while the friction in the run-in behavior is initially higher due to the soothing effects of the coating. The experiments also show a tendency for shallow textures to exhibit lower friction compared to deeper ones, which corresponds to the expectations from the simulation.