Carbon powders exhibit electrical conductivity that causes the powders to agglomerate due to the applied electrostatic forces and discharges capacitance when used for surface treatments with plasma sources. To avoid this obstacle, a non-direct method is used with active gas that is generated through plasma. This active gas is in contact with the carbon powder so that the hydrophilic characteristics are formed. It is the carboxyl COO− functional group that causes hydrophilic improvement and it is shown to increase in the carbon surface after soft oxidation. The wettability of carbon powder gradually improves with more plasma treatment time. This is shown through a simple water dispersion test. Eventually, the dispersed aqueous solution gradually separates the powder, which either floats or sinks. The sample treated for 60 min is shown to continuously sustain dispersibility in water over a long period of time.
The effects of the addition of hydrogen on the properties of an argon plasma jet generated using a microwave plasma source under low-pressure conditions were experimentally investigated. Hydrogen was introduced at concentrations of 0.1%–1%, and the resulting changes in plasma jet characteristics were analyzed using optical emission spectroscopy (OES) and Langmuir probe (LP) measurements. The plasma jet length decreased significantly, and a reduction of over 60% occurred at a hydrogen concentration of 0.4% compared to that in pure argon plasma. The OES results indicated a reduction in Ar I intensities and a nonlinear trend in Hα and Hβ emission intensities. Based on LP measurements, decreases of 54% and 37% were observed in the electron temperature and plasma density, respectively, with 0.6% hydrogen addition. These effects are attributed to recombination reactions and interactions between argon and hydrogen species, which consume free electrons and metastable argon states.