Yongbiao Yang

Yongbiao Yang


Research Focus & Metrics

Academic Career Length

33Years (1994-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
11 August 2021 in Materials
Verified
Journal Article
Open access
PDF file
JMJin Ma
Jin Ma
QWQiang Wang
Qiang Wang
YYYongbiao Yang
Yongbiao Yang
FYFulai Yang
Fulai Yang
DBDong Beibei
Dong Beibei
ZZZhimin Zhang
Zhimin Zhang
The quasi-static and low cycle fatigue tests of extruded 7075 Al alloy (Φ200 mm) were investigated in three directions: the extrusion direction (ED), the radial direction (RD), and 45° with ED (45°). Grain morphology analysis, texture measurement, and fatigue fracture characterization were conducted to discuss the relationship between microstructure and mechanical properties. The experimental results showed that the ED specimen had higher ultimate tensile strength (UTS) and low cycle fatigue (LCF) properties, which were mainly attributed to the following three causes. First, the grain boundaries (GBs) had an obvious effect on the crack growth. The number of GBs in the three directions was different due to the shape of the grains elongated along the ED. Second, the sharp texture and the small Schmidt factor along the ED explained the higher ultimate tensile strength (UTS) of the ED specimens. Third, fatigue fracture observation showed that the ED specimen had a narrow fatigue striation spacing, which indicated that the plastic deformation of the ED specimen was the smallest in each cycle. In addition, two fatigue prediction models were established to predict the LCF life of extruded 7075 Al alloy, based on the life response behavior of the three directions under different strains.

15 November 1994 in Journal of Applied Physics
Verified
Journal Article
Closed access
PDF file
SGS. Gangopadhyay
S. Gangopadhyay
YYYongbiao Yang
Yongbiao Yang
GHGeorge C. Hadjipanayis
George C. Hadjipanayis
VPV. Papaefthymiou
V. Papaefthymiou
CSChristopher Sorensen
Christopher Sorensen
KKK. J. Klabunde
K. J. Klabunde
The structural and magnetic properties of two Fe‐Co alloy particles with composition Fe100−xCox(x=45,65) were studied using x‐ray diffraction, x‐ray photoelectron spectroscopy, transmission electron microscopy, superconducting quantum interference device magnetometry, and Mössbauer spectroscopy. The particles were nearly spherical in shape with an average particle size around 350 Å. Particles formed long chains and showed a core/shell particle morphology. X‐ray diffraction and Mössbauer studies showed the presence of bcc α‐Fe‐Co and CoFe2O4 phases with the former as the majority phase in Fe55Co45 and the latter the majority phase in Fe35Co65. The room‐temperature coercivities of both of these samples were much higher than those in Fe particles with values exceeding 2.2 kOe. The Fe35Co65 sample showed a drastic temperature dependence of coercivity from 1.5 kOe at 300 K to 15 kOe at 10 K. The structural and magnetic data suggest a core/shell morphology with the surface oxide layer having a very important impact on both the magnitude and temperature dependence of the coercivity of the whole particle.

1 February 2022 in Materials Research Express
Verified
Journal Article
Open access
YZYi Zhang
Yi Zhang
JMJin Ma
Jin Ma
QWQiang Wang
Qiang Wang
YYYongbiao Yang
Yongbiao Yang
MZMingjie Zhu
Mingjie Zhu
ZZZhimin Zhang
Zhimin Zhang
For an extrusion process of 7075 Al alloy, the extrusion direction of the initial blank is changed to study the mechanical properties of the formed plates and characterize their microstructure. The as-received bar is extruded 7075 Al alloy. The secondary extrusion deformation is along and perpendicular to the initial extrusion direction. The results show that the anisotropy of mechanical properties of the two samples decreases obviously after secondary deformation. The anisotropy of yield strength and ultimate tensile strength of ED90 sample is lower than that of ED0 sample, but the plastic anisotropy is slightly higher than that of ED0 sample. In addition, the recrystallized grain proportion of ED90 sample is high and the texture strength is low, so the Schmid factor in the three directions is similar. The tensile fracture mode of the two samples belongs to ductile fracture, but the morphology of dimple and the size of cleavage plane are slightly different.

15 February 2022 in Materials
Verified
Journal Article
Open access
PDF file
HCHui Cao
Hui Cao
YYYongbiao Yang
Yongbiao Yang
XZxing zhang
xing zhang
JMJin Ma
Jin Ma
TZTingyan Zhang
Tingyan Zhang
ZZZhimin Zhang
Zhimin Zhang
This study proposed a rotary back extrusion (RBE) process for an open punch, which is used to produce high-performance 7075 aluminum alloy cup-shaped piece. The RBE experiment was carried out on the Gleeble-3500 testing machine at 400 °C and compared with the conventional back extrusion (CBE). The microstructure was analyzed by optical microscope, scanning electron microscope and DEFORM-3D simulation software. The results shown that compared with CBE, RBE can significantly increase the equivalent strain value and deformation uniformity of 7075 aluminum alloy cup-shape pieces. RBE deformation increases the accumulated strain of the piece, and the rotation of the die causes the piece to produce shear strain, which increases the overall strain of the cup-shape piece. The proportion of dynamic recrystallization increases, and the grain refinement was obvious. The micro-hardness value of the RBE sample is higher than that of the CBE sample, which could be the result of grain refinement strengthening. What is more, RBE and CBE have different metal flow laws.

12 August 2020 in Journal of Materials Engineering and Performance
Verified
Journal Article
Closed access
PDF file
XLXubin Li
Xubin Li
HHHenry Hu
Henry Hu
ZZZhimin Zhang
Zhimin Zhang
YYYongbiao Yang
Yongbiao Yang
WQWang Qiang
Wang Qiang

1 September 2020 in Materials Research Express
Verified
Journal Article
Open access
JWJun Wang
Jun Wang
FYFulai Yang
Fulai Yang
JMJin Ma
Jin Ma
TZTingyan Zhang
Tingyan Zhang
HCHui Cao
Hui Cao
YYYongbiao Yang
Yongbiao Yang
A hollow billet Expanding-Reducing Extrusion (ERE) wheel hub forming process was carried out with AZ80 magnesium alloy. The effects of ageing on Low-cycle fatigue (LCF) properties were investigated, and the microstructure was characterized with scanning electronic microscopy (SEM). The LCF testing results exhibited that the stress amplitude increased with increasing ageing time, while the plastic strain decreased with increasing ageing time. Cyclic softening followed by hardening was observed for 0 h and 16 h aged samples; however, there was no obvious cyclic softening or hardening for 36 h aged sample. The tension-compression asymmetry were not obvious due to the low strain, precipitation and the non typical basal texture. Fracture observations indicated that the fatigue cracks were initiated on the surface, and the crack propagation area decreased with increasing ageing time. Thus, it can be concluded that ageing has strong effects on the fatigue life for the studied magnesium alloy.