In this study, the wettability of PET membranes (prepared with different pore sizes) treated by UV irradiation, thermal annealing or doping with metal nanoparticles was investigated. The wettability was studied using the contact angle method based on the optical microscopy. The membranes were analyzed before and after pore etching, and after each applied treatment. It turned out that membranes with different pore sizes exhibit different wetting behavior. Of particular interest are membranes with 0.53 $\mathsf{\mu }$m pores. When pristine, they show high hydrophobicity (a high contact angle), but after treatment (some of which can be considered as an accelerated aging), their wetting characteristics swap between a hydrophobic and hydrophilic state. Interactions between packaging material and food and the external environment through fine control of wettability could have a major impact on maintaining product quality.

As an alternative to research nuclear reactors, a compact accelerator-driven neutron generator that uses a lithium beam driver could be a promising candidate since it produces almost no undesired radiation. However, providing an intense lithium-ion beam has been difficult, and it has been thought that the practical application of such a device would be impossible. The most critical problem of insufficient ion fluxes has been solved by applying a direct plasma injection scheme. In this scheme, a pulsed high-density plasma from a metallic lithium foil generated by laser ablation is efficiently injected and accelerated by a radio-frequency quadrupole linear accelerator (RFQ linac). We have obtained a peak beam current of 35 mA accelerated to 1.43 MeV, which is two orders of magnitude higher than a conventional injector and accelerator system can deliver.

A 200 mJ laser pulse energy, 39 fs-pulse duration, 10 μm focal spot, p-polarized radiation has been employed to irradiate thin Au foils to produce proton acceleration in the forward direction. Gold foils were employed to produce high density relativistic electrons emission in the forward direction to generate a high electric field driving the ion acceleration. Measurements were performed by changing the focal position in respect of the target surface. Proton acceleration was monitored using fast SiC detectors in time-of-flight configuration. A high proton energy, up to about 20 Me V, with a narrow energy distribution, was obtained in particular conditions depending on the laser parameters, the irradiation conditions, and a target optimization.