Shizhao Fan

Dr. Shizhao Fan


Research Focus & Metrics

Academic Career Length

9Years (2018-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
11 February 2019 in IEEE Journal of Photovoltaics
Verified
Journal Article
Closed access
SFShizhao Fan
Shizhao Fan
DJDaehwan Jung
Daehwan Jung
YSYukun Sun
Yukun Sun
BLBrian D. Li
Brian D. Li
DMDiego Martín-Martín
Diego Martín-Martín
MLMinjoo L. Lee
Minjoo L. Lee
The highest efficiency heteroepitaxial GaAs solar cells on Si have historically been grown in the p+/n polarity, which was preferred due to the decreased sensitivity of open-circuit voltage in such cells to threading dislocations. The n+/p polarity also has potential advantages due to the higher mobility of electrons than holes in GaAs, and most multi-junction solar cells in the literature are grown in this polarity. Here, we demonstrate n+/p GaAs solar cells on Si with a certified AM1.5G efficiency of 16.8%, approaching the best certified efficiency of 18.1% for p+/n cells in the literature. The high efficiency of our n+/p cells is primarily due to the short-circuit current density of 26.5 mA/cm2, which is significantly higher than prior p+/n record cells. The strong carrier collection results from the use of a highly transparent AlInP window layer, thin n+ emitter, and a relatively high minority electron diffusion length in the p-type base. The high quantum efficiency of these n+/p cells at wavelengths of 700–880 nm makes them promising for future triple-junction devices on Si, where the GaAs will serve as a middle sub-cell.

2 November 2020 in Applied Physics Letters
Verified
Journal Article
Closed access
PDF file
PDPankul Dhingra
Pankul Dhingra
SFShizhao Fan
Shizhao Fan
YSYukun Sun
Yukun Sun
RHRyan D Hool
Ryan D Hool
BEBrendan Eng
Brendan Eng
MLMinjoo Larry Lee
Minjoo Larry Lee
Quantum dots (QDs) epitaxially grown on Si are promising for monolithic integration of light sources on a Si photonics platform. Unlike quantum well (QW) lasers on Si, 1.3 μm InAs QD lasers on Si show similar threshold current to those grown on GaAs owing to their better dislocation tolerance. To date, research on dislocation-tolerant QDs has exclusively focused on materials emitting at telecom wavelengths. In this work, we report visible InP QDs on Si with photoluminescence (PL) intensity similar to their counterparts grown on GaAs despite high threading dislocation density (TDD). In contrast, visible InGaP QWs grown on Si with the same TDD value show 9 × degradation in PL intensity compared to QWs grown on GaAs. The dislocation tolerance of InP QDs arises from their high density relative to TDD and the lateral carrier confinement that they provide. InP QDs on Si with bright PL are promising for low-cost light emitters and integrated photonics applications requiring monolithic red-light sources.

9 September 2022 in Journal of Applied Physics
Verified
Journal Article
Closed access
PDF file
SFShizhao Fan
Shizhao Fan
RLRong Liu
Rong Liu
YHYingnan Huang
Yingnan Huang
JLJianxun Liu
Jianxun Liu
XZXiaoning Zhan
Xiaoning Zhan
HYHui Yang
Hui Yang
We implemented invisibility criterion and black–white contrast orientation analysis into low-tilt electron channeling contrast imaging (ECCI) for dislocation-type discrimination in GaN and AlGaN layers grown on a Si(111) substrate. Our ECCI and x-ray diffraction (XRD) analysis attained consistent threading dislocation densities for GaN and AlGaN grown on Si, but demonstrated drastic discrepancy in the percentage of edge-type dislocations, potentially due to the lack of appropriate consideration of mixed-type (a→+c→) dislocations in XRD. Further ECCI analysis of GaN/AlGaN heterointerface revealed mixed-type (a→+c→) dislocation half-loops and dislocation bending due to compressive strain relaxation, validating that not all the dislocations originated from the mosaic or columnar structure. As a result, XRD analysis based on the mosaic block model does not give reliable edge-to-screw dislocation ratio. The observation of classic van der Merwe–Matthews-type dislocation half-loop nucleation and dislocation gliding could be associated with potential GaN/AlGaN optoelectronic device degradation issues.

1 October 2018 in IEEE Journal of Photovoltaics
Verified
Journal Article
Closed access
JGJonathan Grandidier
Jonathan Grandidier
HAHarry A. Atwater
Harry A. Atwater
JCJames A. Cutts
James A. Cutts
AKAlexander P. Kirk
Alexander P. Kirk
MOMark L. Osowski
Mark L. Osowski
GTGiulia Tagliabue
Giulia Tagliabue
Low-intensity high-temperature solar cells that operate effectively in the atmosphere of Venus at various altitudes and also survive on the 465 °C surface of Venus are being developed. Thermal stability, high-temperature current-voltage (I-V), and external quantum efficiency measurements on GaInP/GaAs double-junction solar cells are presented. Solar-cell modeling under the atmospheric conditions of Venus is used to design the optimum solar-cell structure.

28 December 2021 in Journal of Applied Physics
Verified
Journal Article
Closed access
PDF file
RHRyan D. Hool
Ryan D. Hool
YSYukun Sun
Yukun Sun
BLBrian D. Li
Brian D. Li
PDPankul Dhingra
Pankul Dhingra
RTRachel W. Tham
Rachel W. Tham
MLMinjoo Larry Lee
Minjoo Larry Lee
We directly show that doping type strongly affects the threading dislocation density (TDD) of relaxed GaP on Si, with n-type GaP having a TDD of ∼3.1 × 107 cm−2, nearly 30× higher than both p-type and unintentionally doped GaP at ∼1.1 × 106 cm−2. Such a high TDD is undesirable since n-GaP on Si serves as the starting point for the growth of epitaxial III-V/Si multi-junction solar cells. After highlighting additional challenges for highly n-doped GaP on Si including increased surface roughness, anisotropic strain relaxation, and inhomogeneous TDD distributions from blocking of the dislocation glide, we go on to show that the TDD of n-GaP on Si rises by 10× as the doping concentration increases from ∼5 × 1016 to ∼2 × 1018 cm−3. Next, we investigate the effects of additional dopant choices on the TDD, determining that electronic effects dominate over solute effects on the dislocation velocity at these concentrations. Finally, we demonstrate the respective roles of compressively strained superlattices, low-temperature initiation, and lowered n-type doping concentration on reducing the TDD for n-GaP on Si. By combining all three, we attain relaxed n-GaP on Si with a TDD of 1.54(±0.20) × 106 cm−2, approaching parity with p-GaP on Si. Such high-quality n-GaP on Si will play an important role in boosting the efficiency of epitaxial III-V/Si multi-junction solar cells.

4 November 2024 in Applied Physics Letters
Verified
Journal Article
Closed access
PDF file
YYYuhao Yin
Yuhao Yin
HZHaiyang Zhao
Haiyang Zhao
RLRong Liu
Rong Liu
SFShizhao Fan
Shizhao Fan
JSJiandong Sun
Jiandong Sun
HYHui Yang
Hui Yang
Sc-alloyed AlN epilayers were grown on commercial GaN/sapphire templates by molecular beam epitaxy (MBE) to validate the Sc composition of 18% and in-plane lattice matching with GaN. As-grown Sc0.18Al0.82N/GaN heterostructure exhibits a two-dimensional electron gas (2DEG) density of 3.58 × 1013 (2.96 × 1013) cm−2 and a mobility of 241 (295) cm2⋅V−1⋅s−1 at 300 (77) K, demonstrating the feasibility of employing its high spontaneous polarization toward high 2DEG density and highlighting detrimental impurity scattering due to the regrowth interface. Implementation of AlN impurity blocking layers boosts 2DEG mobility to 1290 (8730) cm2 V−1⋅s−1at 300 (77) K. In addition, we have engineered a surface-treatment strategy to selectively decompose the 2.5-nm-thick GaN cap layer of commercial GaN(2.5 nm)/Al0.20Ga0.80N(22 nm)/GaN heterostructure epi-wafers at high temperature prior to MBE regrowth of Sc0.18Al0.82N to eliminate impurity incorporation at the regrowth interface. Regrowth of a Sc0.18Al0.82N layer on the pristine Al0.20Ga0.80N surface increases 2DEG density from 7.89 × 1012 to 9.57 × 1012 cm−2, together with a slight reduction in mobility from 2160 to 1970 cm2⋅V−1⋅s−1 at 300 K, reducing the sheet resistance by 10%. Our calculation implies that it is practical to boost 2DEG density to over 2.0 × 1013 cm−2 by thinning Al0.20Ga0.80N down to 4 nm.