The analytical method for the calculation of the properties of a bolted joint established by the structural Eurocodes proposes the T-stub as a component for the characterization of the tension and compression zones in moment joints. In this article, a review of the state of the art on the T-stub component is developed, where the works developed since it was initially defined, and from the perspectives of formulation, experimentation and numerical simulation are summarized and discussed. Additionally, possible future lines of work are proposed.

One of the key advancements brought on by Industry 4.0 is additive manufacturing, particularly material extrusion printers that enable the creation of complex parts using composite materials. This article presents a study on the mechanical behavior of 3D printing multi-materials, which are easily accessible and cost-effective for users. Tensile, compression, and flexural tests were conducted on various material configurations to explore their mechanical properties. Results indicate that certain material combinations exhibit enhanced properties in tension and compression, while individual materials perform stronger in flexural tests due to improved interlayer adhesion. The research highlights how material combinations in 3D printing can impact the mechanical properties of parts, offering potential applications in structural design. The study found that a combination of PETG and PLA yields optimal mechanical properties in tensile tests, while configurations with PLA on the outer layer perform best in compression tests. It also identifies a limitation in flexural testing dimensions, where specimens with a 4 mm thickness restrict the possibilities of material combination tests.

This paper addresses the challenges associated with steel pipes used for transporting liquid fluids within buried sections of mining facilities, specifically in areas with heavy mining vehicles. While existing design standards, such as AW-WA M11, and manufacturer recommendations largely consider loads from vehicles like the AASHTO HS20 or Cooper E-80, both weighing below 35 tons, these guidelines inadequately represent the actual loads experienced on certain mining roads, notably those accommodating heavy vehicles, like haul roads. The research presented here focuses on the interaction between soil and buried steel pipes under the substantial loads exerted by mining vehicles with a maximum gross load of up to 612 tons, inclusive of hauled material weight. Utilizing a parametric study with the finite element method, the paper identifies critical variables influencing efforts and deflections calculations in these facilities. The analysis of 108 models, varying parameters related to trench pipe installation conditions, offers insights that empower designers to refine soil trench parameters in mining facilities, mitigating pipe failures and optimizing installation costs. Ultimately, the key influential variables affecting pipe deflection and stress are identified as the trench backfill height and the elasticity modulus of the trench lateral fill.

Mechanical ventilation systems require a device for measuring the air flow provided to a patient in order to monitor and ensure the correct quantity of air proportionated to the patient, this device is the air flow sensor. At the beginning of the COVID-19 pandemic, flow sensors were not available in Peru because of the international supply shortage. In this context, a novel air flow sensor based on an orifice plate and an intelligent transducer was developed to form an integrated device. The proposed design was focused on simple manufacturing requirements for mass production in a developing country. CAD and CAE techniques were used in the design stage, and a mathematical model of the device was proposed and calibrated experimentally for the measured data transduction. The device was tested in its real working conditions and was therefore implemented in a breathing circuit connected to a low-cost mechanical ventilation system. Results indicate that the designed air flow sensor/transducer is a low-cost complete medical device for mechanical ventilators that is able to provide all the ventilation parameters by an equivalent electrical signal to directly display the following factors: air flow, pressure and volume over time. The evaluation of the designed sensor transducer was performed according to sundry transducer parameters such as geometrical parameters, material parameters and adaptive coefficients in the main transduction algorithm; in effect, the variety of the described results were achieved by the faster response time and robustness proportionated by transducers of nanostructures based on Anodic Aluminum Oxide (AAO), which enhanced the designed sensor/transducer (ST) during operation in intricate geographic places, such as the Andes mountains of Peru.

This paper presents the results of an experimental study on the behavior of the cold- formed steel shear wall panel (CFSSWP) with fibrocement panels as sheathing, when it is subjected in-plane shear deformations and flexural deformation under perpendicular monotonically increasing horizontal loads on the longest plane. A full-scale housing section was built with three walls and a ceiling using commonly used construction details in El Salvador. The strength and stiffness of the experimental specimen tested overcame significantly critical demand imposed by the technical design standards in this country. Additionally, a simplified finite element model was defined with the objective to analyze stresses in the components. The results of the numerical model were similar to the experimental model tested.