Tao Liu

Dr. Tao Liu


Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
22 February 2023 in Electronics
Verified
Journal Article
Open access
PDF file
QLQiwei Li
Qiwei Li
JFJinyong Fang
Jinyong Fang
JDJun Ding
Jun Ding
WCWen Cao
Wen Cao
JSJing Sun
Jing Sun
TLTao Liu
Tao Liu
A novel tuning fork-shaped tri-band planar antenna (NTTPA) for the LTE 2.3/3.8-GHz band, WLAN 2.4/5.2/5.8-GHz band, and WiMax 2.5/3.5/5.5-GHz band is presented in this letter. By introducing an asymmetrical turning fork-shaped patch and an inverted L-shaped patch, three notched bands can be generated to form a triple-band operation. The antenna is fabricated on an FR4 board and excited by an SMA connector using a microstrip line. The antenna structure is simple and has a compact size of 45 mm × 40 mm. The measured operating frequency covers 2.2–2.63, 2.73–3.8, and 5.13–6.3 GHz, and the percentage bandwidth is close to 53.3% (S11 < −9.8 dB from 2.2 to 3.8 GHz) and 20.5% (S11 < −10 dB from 5.13 to 6.3 GHz). The calculated and experimental results suggest that the proposed antenna is one of the best candidates for wireless communication systems in terms of multi operating bands, broad percentage bandwidth (BW), compactness, stable radiation pattern, easy processing, and low cost.

28 November 2022 in Electronics
Verified
Journal Article
Open access
PDF file
TLTao Liu
Tao Liu
Le XuLe Xu
Le Xu
QLQiwei Li
Qiwei Li
BYBin Yao
Bin Yao
Xiaowei ShiXiaowei Shi
Xiaowei Shi
Based on the previous research on electromagnetic pulse coupling, which pays more attention to the front-door coupling or the back-door coupling alone, this paper analyzes the influence of an electromagnetic pulse on electronic devices and systems through the joint analysis of front-door and back-door couplings using the finite-difference time-domain method (FDTD). This specific measure is used to simplify the front-door coupling to the voltage source injection, which occurs simultaneously with plane wave irradiation. This coupling scheme of the front door and back door with the voltage source and plane wave acting simultaneously is rarely seen in previous analyses, which also gives consideration to the working state of the circuit. Although the equivalent circuit model is widely used, it cannot effectively reflect the working state of the diode circuit under the conditions of large injection and high frequency. In view of the limited application scenarios of the traditional equivalent circuit model, which cannot accurately describe the internal response characteristics of the diode under different electromagnetic pulse coupling, this paper introduces an improved equivalent circuit model based on the physical model. Taking the Positive Intrinsic-Negative (PIN) limiter as the target, this paper analyzes the influence of the front-door and back-door joint coupling on its performance under different electromagnetic pulses and then gives protection suggestions.

23 September 2021 in Electronics
Verified
Journal Article
Open access
PDF file
TLTao Liu
Tao Liu
Le XuLe Xu
Le Xu
YHYao He
Yao He
HWHan Wu
Han Wu
YYYong Yang
Yong Yang
Feng WeiFeng Wei
Feng Wei
Based on the equivalent circuit model and physical model, a new method for analyzing diode electrical characteristics based on a neural network model is proposed in this paper. Although the equivalent circuit model is widely used, it cannot effectively reflect the working state of diode circuits under the conditions of large injection and high frequency. The analysis method based on physical models developed in recent years can effectively resolve the above shortcomings, but it faces the problem of a low simulation efficiency. Therefore, the physical model method based on neural network acceleration is used to improve the traditional, equivalent circuit model. The results obtained from the equivalent circuit model and the physical model are analyzed using the finite-difference time-domain method. The diode model based on a neural network is fitted with training data obtained from the results of the physical model, then it is summarized into a voltage–current equation and used to improve the traditional, equivalent circuit method. In this way, the improved equivalent circuit method can be used to analyze the working state of a diode circuit under large injection and high frequency conditions. The effectiveness of the proposed model is verified by some examples.