Wen Cao

Dr. Wen Cao


Research Focus & Metrics

Academic Career Length

10Years (2017-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
6 November 2018 in IEEE Transactions on Wireless Communications
Verified
Journal Article
Closed access
Shuai MaShuai Ma
Shuai Ma
HLHang Li
Hang Li
YHYang He
Yang He
RYRuixin Yang
Ruixin Yang
SLSongtao Lu
Songtao Lu
SLShiyin Li
Shiyin Li
In this paper, we investigate channel capacity region of interference channel and develop both centralized and distributed interference management schemes for visible light communication networks. For a typical multiuser and multi-LED scenario, we derive both discrete inner and outer bounds of channel capacity region, and such proposed inner bound is numerically shown to be the highest among the existing inner bounds. Moreover, with the continuous input signals, we develop the channel capacity region bounds in closed-form, termed (α,β,γ) (ABG) inner bound and ABG outer bound, which are tight for the large amplitude-to-variance ratio. Then, based on the derived ABG inner bounds, we investigate a centralized beamforming design problem to minimize the total transmit power, under three practical constraints: peak optical power, average optical power, and average electrical power. By utilizing semidefinite relaxation technique, we reformulate this NP-hard problem as a convex semidefinite program, and obtain the optimal beamformers. Furthermore, to reduce the cost of channel station information exchange, we propose a distributed coordinated interference management scheme by adopting the alternating direction method of multipliers method. Finally, numerical results are presented to evaluate the performance of the proposed interference management schemes in visible light communication networks.

29 September 2017 in IEEE Signal Processing Letters
Verified
Journal Article
Closed access
WCWen Cao
Wen Cao
JLJian Lan
Jian Lan
XLX. Rong Li
X. Rong Li
Extended object tracking and classification (EOTC) using multisensor kinematic and attribute data is a challenging and highly coupled problem. It is a joint decision and estimation (JDE) problem. A good solution has to handle effectively the coupling between tracking and classification and also make good use of multisensor data. For this purpose and based on the recently proposed JDE framework, this letter proposes a conditional JDE (CJDE) risk, which integrates the tracking error and the classification cost using heterogeneous sensor data. Object classes differ from each other in maneuverability and feature attribute. A suitable model is identified and used to describe object classes differing in maneuverability. Also presented are attribute evolution and measurement models. Then, an EOTC algorithm optimizing the CJDE risk is proposed, which considers the coupling and the information contained in various data. Simulation results demonstrate the superiority of the proposed EOTC algorithm in joint performance.

21 May 2020 in IEEE Transactions on Intelligent Transportation Systems
Verified
Journal Article
Closed access
WCWen Cao
Wen Cao
JLJian Lan
Jian Lan
QWQisheng Wu
Qisheng Wu
As a critical component of traffic safety, violation detection and treatment can effectively reduce illegal driving so as to ensure the safety of our lives. In this system, both road-constrained target tracking and identification are involved, which are coupled. This is a constrained joint tracking and identification (CJTI) problem, and good solutions require addressing the two problems jointly. The recently proposed joint decision and estimation (JDE) framework and the conditional JDE (CJDE) approach have been proved to be superior for such problems involving coupled decision (identification) and estimation (tracking). Inspired by this, for CJTI of ground targets, this paper proposes a novel constrained CJDE approach. First, a hybrid CJTI system incorporating target dynamics, class characteristics and road constraints is formulated. Based on this, we propose a constrained CJDE risk converting a constrained tracking cost and a constrained identification risk into one framework. An optimal constrained CJDE solution containing an estimator and a decider is derived. Simulation results verify the effectiveness of the proposed constrained CJDE method. They show that by fully utilizing the constraint information and the coupling between tracking and identification, the constrained CJDE approach outperforms traditional two-step methods in joint performance.

22 February 2023 in Electronics
Verified
Journal Article
Open access
PDF file
QLQiwei Li
Qiwei Li
JFJinyong Fang
Jinyong Fang
JDJun Ding
Jun Ding
WCWen Cao
Wen Cao
JSJing Sun
Jing Sun
TLTao Liu
Tao Liu
A novel tuning fork-shaped tri-band planar antenna (NTTPA) for the LTE 2.3/3.8-GHz band, WLAN 2.4/5.2/5.8-GHz band, and WiMax 2.5/3.5/5.5-GHz band is presented in this letter. By introducing an asymmetrical turning fork-shaped patch and an inverted L-shaped patch, three notched bands can be generated to form a triple-band operation. The antenna is fabricated on an FR4 board and excited by an SMA connector using a microstrip line. The antenna structure is simple and has a compact size of 45 mm × 40 mm. The measured operating frequency covers 2.2–2.63, 2.73–3.8, and 5.13–6.3 GHz, and the percentage bandwidth is close to 53.3% (S11 < −9.8 dB from 2.2 to 3.8 GHz) and 20.5% (S11 < −10 dB from 5.13 to 6.3 GHz). The calculated and experimental results suggest that the proposed antenna is one of the best candidates for wireless communication systems in terms of multi operating bands, broad percentage bandwidth (BW), compactness, stable radiation pattern, easy processing, and low cost.

6 May 2023 in Electronics
Verified
Journal Article
Open access
PDF file
QLQiwei Li
Qiwei Li
JFJinyong Fang
Jinyong Fang
WCWen Cao
Wen Cao
JSJing Sun
Jing Sun
JDJun Ding
Jun Ding
JWJiangniu Wu
Jiangniu Wu
A balanced bandpass filter (BPF) with an improved frequency selectivity for differential-mode (DM) excitation and high rejection for common-mode (CM) excitation is proposed in this paper. Two half-wavelength stepped impedance resonators (SIRs) are employed based on mixed electric and magnetic couplings to realize a DM passband centered at 2.48 GHz. The center frequency and bandwidth can be easily controlled by optimizing the dimensions of SIRs and the coupling between them, respectively. Meanwhile, two transmission zeros (TZs) are generated based on the mixed electric and magnetic couplings and are independently controlled by tuning the coupling strength. Moreover, a wide DM stopband can be realized by optimizing the SIRs. The proposed balanced BPF is fed by balanced U-type microstrip–slotline transition structures, which can achieve high wideband CM rejection without influencing the DM responses, and the design complexity can be clearly reduced. Finally, a balanced BPF is fabricated, and a good agreement between the simulation and the measurement is observed, which verifies the design method.

9 March 2022 in Sensors
Verified
Journal Article
Open access
PDF file
WCWen Cao
Wen Cao
QLQiwei Li
Qiwei Li
This paper proposes a novel extended object tracking (EOT) approach with embedded classification. Traditionally, for extended objects, only tracking is addressed without considering classification. This has serious defects: On the one hand, some practical EOT problems require classification as an embedded subproblem; on the other hand, with the assistance of classification, the tracking performance can be improved. Therefore, we propose a systematic EOT method with embedded classification, which is desired to satisfy the practical demands and also enjoys superior tracking performance. Specifically, we first formulate the EOT problem with embedded classification by kinematic models and attribute models. Then, we explore a random-matrix-based, multiple model EOT method with embedded classification. Two strategies are creatively provided in which soft classification and hard classification are embedded, respectively. Especially for the EOT with hard classification, a sequential probability ratio-test-based classification scheme is explored due to its nice properties and adaptability to our problem. In both methods, classification assist tracking is used. The simulation results demonstrate the superiority of the proposed EOT method with embedded classification, which can not only satisfy the practical requirements for classification but can also improve the tracking performance by utilizing the assistant of classification.