A class of novel arbitrary-order balanced bandpass filters (BPFs) and balanced quasi-reflectionless BPFs (QR BPFs) using out-of-phase coupled double-sided parallel-strip lines (DSPSLs) are presented in this article. The proposed out-of-phase coupled DSPSL structure consists of a pair of double-sided parallel-strip transmission lines with opposite phases and resonators set in the center. With this architecture, only differential-mode (DM) signals can excite the resonators, while common-mode (CM) energy has little effect on them. The first designed balanced BPF consists of a bandpass section ( N -order coupled-line filter) in the main pass and a pair of reflective bandstop (RBS) sections ( M -order coupled $\lambda $ /4 short-circuited resonators) terminated in the bypasses. Furthermore, by terminating the RBS sections with resistive elements, absorptive bandstop (ABS) sections can be formed, which can constitute a complementary duplexer structure together with the bandpass section. Thus, the balanced filters are easily extended to QR BPFs. High-order balanced filters and reflectionless filters are designed by network functions analysis, and detailed design guidance is given. Three balanced prototypes with center frequencies set at 3 GHz are manufactured and measured. Good DM selectivity and CM rejection are achieved in the balanced filter. The balanced reflectionless filters have the advantages of absorption in stopband DM and all-range CM energy, while in-band flatness can be improved by order extension. The experimental features are in good agreement with the theoretical and simulation results.
8 January 2025 in IEEE Antennas and Wireless Propagation Letters
A new method of isolation improvement and bandwidth enhancement for the dual-band MIMO antenna based on a metamaterial wall is proposed. The proposed antenna consists of a 2×1 dual-band antenna and a metal-line-based metamaterial wall (MLB-MW). On the one hand, the isolation improvement is achieved by the mu-negative metamaterial (MNG) characteristic of the MLB-MW. The isolation improved by 36dB after loading the MLB-MW. On the other hand, the bandwidth enhancement is obtained by generating additional resonance by the MLB-MW. The operating bandwidths (|S11|<-10dB) have been increased from 3.54∼4.01GHz and 4.72∼5.08GHz to 3.41∼4.02GHz and 4.67∼5.14GHz, resulting in the bandwidth extensions of 32% and 30%, respectively. The dimension of the MIMO antenna is 0.70λ L ×0.29λ L ×0.23λ L (λ L is the wavelength of the lowest frequency). To validate the results, a prototype was fabricated and measured in an anechoic chamber, the results show that the proposed antenna can be candidate for 5G base station applications.
5 January 2024 in IEEE Transactions on Microwave Theory and Techniques
Based on the linear responses and nonlinear (NL) loss effects of ferrite, a filtering–limiting (FT) integrated device applicable to the high-power microwave (HPM) electromagnetic environment is proposed. The small-signal bandpass filtering characteristics of the FT device with polycrystalline yttrium iron garnet (YIG) as a substrate are achieved using the conventional parallel-coupled microstrip structure. When HPM pulses within the operating frequency band are injected, the NL loss effects are excited in this device, achieving power-limiting characteristics. However, the spatial distribution of the RF magnetic fields in such a device is extremely inhomogeneous. There is currently no commercially available simulation tool that can effectively calculate the power loss performance of ferrite materials in the HPM electromagnetic environment. Therefore, combined with the transient-state NL threshold theory, an equivalent iterative simulation method for structure partition is proposed. This method is utilized to quantitatively evaluate the power loss of such resonant structures. The simulated results align well with the measured trends and can successfully indicate the limiting threshold, limiting isolation, and dynamic range of the FT device under HPM conditions.
The damage effect characteristics of GaAs pseudomorphic high electron mobility transistor (pHEMT) under the irradiation of C band high-power microwave (HPM) is investigated in this paper. Based on the theoretical analysis, the thermoelectric coupling model is established, and the key damage parameters of the device under typical pulse conditions are predicted, including the damage location, damage power, etc. By the injection effect test and device microanatomy analysis through using scanning electron microscope (SEM) and energy dispersive spectrometer (EDS), it is concluded that the gate metal in the first stage of the device is the vulnerable to HPM damage, especially the side below the gate near the source. The damage power in the injection test is about 40 dBm and in good agreement with the simulation result. This work has a certain reference value for microwave damage assessment of pHEMT.
In this work, a low-profile optical transparent wideband metamaterial absorber based on radiation–absorption reciprocal theory is proposed. The top layer and bottom layer are composed of indium tin oxide–polyethylene terephthalate films, and the middle layer is a transparent substrate polymethyl methacrylate. The method of transparent wideband absorption using reciprocal theory is proposed to guide the design. Based on characteristic mode analysis and calculated equivalent aperture efficiency, the absorber consisting of composite resonators is analyzed and designed. The equivalent circuit model and surface current distributions are studied to verify the design. The numerical results show that high absorption of greater than 90% in the frequency range of 5.7–16.4 GHz is obtained. A wideband absorption rate of greater than 80% at a 60° incident angle under TM polarization and an absorption rate of greater than 65% at a 60° incident angle under TE polarization are obtained. The proposed design has the advantages of broadband absorption, polarization insensitivity, light transmittance of more than 70%, and compact structure, which can be applied to special scenes that require optical transparency, such as anechoic chamber glass and cockpit glass.
A novel tuning fork-shaped tri-band planar antenna (NTTPA) for the LTE 2.3/3.8-GHz band, WLAN 2.4/5.2/5.8-GHz band, and WiMax 2.5/3.5/5.5-GHz band is presented in this letter. By introducing an asymmetrical turning fork-shaped patch and an inverted L-shaped patch, three notched bands can be generated to form a triple-band operation. The antenna is fabricated on an FR4 board and excited by an SMA connector using a microstrip line. The antenna structure is simple and has a compact size of 45 mm × 40 mm. The measured operating frequency covers 2.2–2.63, 2.73–3.8, and 5.13–6.3 GHz, and the percentage bandwidth is close to 53.3% (S11 < −9.8 dB from 2.2 to 3.8 GHz) and 20.5% (S11 < −10 dB from 5.13 to 6.3 GHz). The calculated and experimental results suggest that the proposed antenna is one of the best candidates for wireless communication systems in terms of multi operating bands, broad percentage bandwidth (BW), compactness, stable radiation pattern, easy processing, and low cost.