The article presents a new approach to the analysis of the stability of automatic systems with discrete links. In almost all modern automatic control systems (ACS), there are links that break signals in time. These are power controlled switches—transistors or thyristors operating in a pulsed mode and digital links in regulators. Time discretization significantly affects the stability of processes in the automatic control system. The theoretical analysis of such systems is rather complicated and requires a significant change in engineering approaches to analysis. With the improvement of digital controllers and a significant increase in their performance, this problem has practically been forgotten. However, its mathematical “content” has not changed since the 1980s when discreteness began to play a major role in hindering the transition to digital automatic control systems. In this paper, we propose a new approach that consists of interpreting the sampling operation by a link with the proposed frequency characteristic, which determines the suppression of input high-frequency signals. This link greatly simplifies engineering calculations and demonstrates the new capabilities of sampling systems. These possibilities include the rational distribution of digitalization resources—the number of bits and the sampling interval between the regulator channels, depending on the frequency range of the efficiency of these channels. We verify and confirm our theoretical statements through simulations and show how this approach makes it possible to formulate new principles of construction of seemingly well-known controllers—PID (Proportional Integral Differential) controllers and variable structure systems (VSS).
Traction motors in electric transport are most often synchronous permanent magnet motors (PMSMs). Induction motors (IMs) have large dimensions and stator current amplitudes under comparable loads. Traditional IM control methods do not solve these problems. Recent studies have shown that by changing the main magnetic flux in the IM in accordance with the load, these characteristics of the asynchronous electric drive can be significantly improved. Standard frequency converters do not allow for the implementation of these algorithms. But it makes sense to conduct a potential assessment of the capabilities of this algorithm to reduce the total stator currents of traction IMs. This article analyzes the results of real tests of a special vehicle for transporting rock inside mines, conducted several years ago at a mining equipment plant and in several mines in Russia. The prototype of the special transport vehicle has a load capacity of 15 tons, and its traction electric drive is based on four motor wheels with a total power of 100 kW and a frequency converter from the company “Vacon” (Vaasa, Finland). The tests were conducted at the plant’s testing ground and in real mine conditions. These tests allowed us to obtain information about the operation of the asynchronous electric drive under dynamically changing loads in a wide range, which is very difficult to obtain on laboratory benches or in industrial enterprise conditions. The experiments confirmed the efficiency of the optimization algorithm for asynchronous electric drives with frequency control. At the same time, the weight, size, and electrical parameters of the drive are as close as possible to those of direct current drives.
1 January 2015 in Bulletin of the South Ural State University. Ser. Computer Technologies, Automatic Control & Radioelectronics
На сегодняшний день основные задачи реализации программ энергосбережения в стране состоят в обеспечении эффективности всех процессов, связанных с производством, передачей и потреблением энергоносителей. В коммунальном хозяйстве потребление тепловой энергии практически на порядок превосходит потребление электрической энергии в связи с нуждами отопления и горячего водоснабжения. Помимо этого, график тепловой нагрузки в течение отопительного сезона сильно варьируется (в 5–6 раз) не только от времени суток, но и от климатических условий. В связи с этим повышение энергоэффективности в системах теплоснабжения за счет обеспечения в них качественного процесса регулирования является актуальной задачей. В статье представлен опыт проведения идентификации регуляторов температуры теплоносителя в системах отопления и горячего водоснабжения. Приведены алгоритмы и результаты идентификации трех наиболее часто применяемых в системах отопления и ГВС регуляторов: ECL Comfort (производитель Danfoss), Vitotronic (производитель Viessmann), 90С (производитель ESBE).
This article presents the results of experimental studies of asynchronous motors with a short-circuited rotor (induction motors—IM) with the most common frequency control methods: scalar; vector control; vector with speed control circuit; scalar control with dynamic compensation. The purpose of the experiments was to identify and show the features of the reaction of these control methods to the stepped sketches of the load on the asynchronous electric drive, as in a nonlinear electromechanical system. When selecting the parameters and settings of the “Schneider electric” frequency converter settings, standard instructions and techniques have been used, so the settings of the regulators were not optimal. The aim was not to determine the most effective structures and show fundamentally new solutions. Asynchronous electric motors are substantially nonlinear structures. In the formation of vector control theory, a number of simplifications and assumptions were used, the cost of which was not very clear and theoretically difficult to assess. This work is a step towards estimating the cost of these simplifications. This paper provides the results of experiments in which step-loading modes are presented by the maximum possible registered signals and the amplitude of the stator voltage, formed by various algorithms, the frequency and amplitude of the rotor current and the actual sliding and rotation speed of the engine rotor. This made it possible to maximally objectively assess the effectiveness of the interpretation of asynchronous electric drives and the methods of their regulation. The authors have conducted research in this area for about 15 years. In numerous articles on this subject over the past 25–30 years, the authors did not find such results. The vast majority of work devoted to the study of asynchronous electric drives with frequency control uses the notion of not too significant errors in the linearization of Park’s vector equations. In particular, the concepts of the sinusoidality of currents and voltages in AC motors and the accuracy of vector equations are almost always used, which are valid only at a constant frequency of the stator voltage.
1 January 2024 in Bulletin of the South Ural State University Series "Power Engineering"
This article discusses engineering methods for calculating the operating modes of asynchronous electric drives with frequency control with a reduced main magnetic flux. Magnetization currents and rotor currents are calculated by methods formed on the basis of simplified equivalent circuits for induction motors and vector diagrams. The conditions for the minimum stator current are given, it is proved that this state corresponds to the equality of the amplitudes of the magnetizing current and the rotor current (reactive and active currents, respectively). This provision makes it possible to estimate the current of the rotor of an asynchronous electric motor when the main magnetic flux is weakened, and the calculation of the rotor and magnetization currents is also carried out according to experimental data. The proposed calculation methods are necessary for optimizing the operating modes of asynchronous electric drives operating with a load less than the nominal one. This optimization consists in reducing the maximum amplitude of the stator voltage. The proposed methods make it possible to evaluate the decrease in the magnetization current and the increase in the rotor current, which may turn out to be excessive. В данной статье рассматриваются инженерные методы расчетов режимов работы асинхронных электроприводов с частотным управлением при уменьшенном основном магнитном потоке. Токи намагничивания и токи ротора рассчитываются методами, сформированными на базе упрощенных схем замещения асинхронных двигателей и векторных диаграмм. Приводятся условия минимального тока статора, доказывается, что это состояние соответствует равенству амплитуд тока намагничивания и тока ротора (реактивного и активного токов соответственно). Это положение позволяет дать оценку тока ротора асинхронного электродвигателя при ослаблении основного магнитного потока, а также производится расчет токов ротора и намагничивания по экспериментальным данным. Предложенные методы расчета необходимы при оптимизации режимов работы асинхронных электроприводов, работающих с нагрузкой меньше номинальной. Эта оптимизация заключается в снижении максимальной амплитуды статорного напряжения. Предлагаемые методы позволяют провести оценку происходящих при этом уменьшении тока намагничивания и увеличения тока ротора, которое может оказаться чрезмерным.
1 January 2018 in Bulletin of the South Ural State University Series "Power Engineering"