This work presents a global plasma model of a gridded air-breathing electric propulsion concept based on magnetized high-frequency plasma operating in the pressure range of 10−3 Pa to 1 Pa. We illustrate that the global plasma model reproduces the experimental measurements of the extracted current over two orders of magnitude in pressure. Consequently, we use the model to investigate the theoretical scalability of the plasma source, finding that the plasma source performance scales reasonably well with the average absorbed power per molecule, even though this scaling factor has its limits. The global model presented in this work is a model of a specific laboratory device and, in future, it can be adapted to very low Earth orbit conditions by adjusting the boundary conditions. The model was implemented using PlasmaSolve p3s-globalmodel software and the configuration file containing all the equations is provided to the community as supplementary material.
This paper presents the recent achievements in the development of ASPIICS (Association of Spacecraft for Polarimetric and Imaging Investigation of the Corona of the Sun), a solar coronagraph that is the primary payload of ESA’s formation flying in-orbit demonstration mission PROBA-3. The PROBA-3 Coronagraph System is designed as a classical externally occulted Lyot coronagraph but it takes advantage of the opportunity to place the 1.4 meter wide external occulter on a companion spacecraft, about 150m apart, to perform high resolution imaging of the inner corona of the Sun as close as ~1.1 solar radii. Besides providing scientific data, ASPIICS is also equipped with sensors for providing relevant navigation data to the Formation Flying GNC system. This paper is reviewing the recent development status of the ASPIICS instrument as it passed CDR, following detailed design of all the sub-systems and testing of STM and various Breadboard models.
We present a miniaturized and wide field-of-view X-ray and Gamma-ray imager consisting of a segmented 2D optics-collimator coupled to the high-sensitivity semiconductor pixel detector Timepix equipped with a high-Z sensor (CdTe 2000 m thick). The compact payload has been deployed in low-Earth orbit (LEO) onboard the 3U Cubesat VZLUSAT-2 which was launched on 13 January 2022. The instrument is designed to verify small spacecraft borne observation in open space of hard X-ray and Gamma-ray sources both of celestial and atmospheric origin. High-resolution spectral-sensitive X-ray and Gamma-ray images are provided with enhanced event discrimination and wide field-of-view up to 60. Description of the instrument together with response evaluation and tests in ground with well-defined sources are presented. The intended observational plan for in-orbit measurements is outlined along with astrophysical goals and issues.
This paper presents microsatellite spacecraft payload study for prompt observation of transient astrophysical objects in X-ray energy range. By combining telescope concepts and miniaturized detectors, the small spacecraft will be able to probe the X-ray temporal emissions of bright events such as Gamma-Ray Bursts (GRBs), X-ray transients or the electromagnetic counterparts of Gravitational Wave Events (GWEs), but also short and long term observations of other types of variable X-ray sources. The spacecraft is based on the CubeSat nanosatellite platform with a volume of 16U. The spacecraft carries two types of X-ray telescopes onboard. The first is intended for X-ray transient monitoring and localization, and the second for detailed spectroscopic observation. The X-ray monitor/localization telescope with wide field of view of several arc degrees is used for localization and flux measurement of X-ray transients, as well as for permanent monitoring of Galactic center area. This telescope is based on Lobster Eye X-ray optics together with pixel detector based on the Timepix3 Quad detector. Rapid follow-up observation by soft X-ray spectroscopy is enabled by a second X-ray spectroscopic telescope with limited FOV (Field of View) of several arcmins with no spatial and/or angular resolution. The spectroscopic telescope uses condenser optics based on replicated parabolic total reflection system (or, alternatively, Wolter system) and a Ketek X-ray SDD detector with energy resolution of about 130 eV as a detector. In addition to technical and instrumental aspects, observational strategy and astrophysical issues and justifications are also addressed in the paper.
14 April 2025 in Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment