Aluminium alloy 5083 was subjected to Laser Shock Peening both with (LSP) and without protective coating (LPwC) at multiple pulse densities. A second LPwC treatment was conducted fully submersed under water, in addition to the standard laminar water flow condition. The results show that compressive residual stresses were generated in all cases, although their character varied depending on the peening strategy and method of confinement. In all cases, higher pulse density lead to an increase in compressive stresses with a saturation point of −325 MPa at 1089 p/cm2 for the LPwC treatments. Corrosion fatigue testing of sensitized samples then showed 59% and 69% improvement in fatigue strength after the LSP and LPwC treatments, respectively.
We present a miniaturized and wide field-of-view X-ray and Gamma-ray imager consisting of a segmented 2D optics-collimator coupled to the high-sensitivity semiconductor pixel detector Timepix equipped with a high-Z sensor (CdTe 2000 m thick). The compact payload has been deployed in low-Earth orbit (LEO) onboard the 3U Cubesat VZLUSAT-2 which was launched on 13 January 2022. The instrument is designed to verify small spacecraft borne observation in open space of hard X-ray and Gamma-ray sources both of celestial and atmospheric origin. High-resolution spectral-sensitive X-ray and Gamma-ray images are provided with enhanced event discrimination and wide field-of-view up to 60. Description of the instrument together with response evaluation and tests in ground with well-defined sources are presented. The intended observational plan for in-orbit measurements is outlined along with astrophysical goals and issues.
This paper presents microsatellite spacecraft payload study for prompt observation of transient astrophysical objects in X-ray energy range. By combining telescope concepts and miniaturized detectors, the small spacecraft will be able to probe the X-ray temporal emissions of bright events such as Gamma-Ray Bursts (GRBs), X-ray transients or the electromagnetic counterparts of Gravitational Wave Events (GWEs), but also short and long term observations of other types of variable X-ray sources. The spacecraft is based on the CubeSat nanosatellite platform with a volume of 16U. The spacecraft carries two types of X-ray telescopes onboard. The first is intended for X-ray transient monitoring and localization, and the second for detailed spectroscopic observation. The X-ray monitor/localization telescope with wide field of view of several arc degrees is used for localization and flux measurement of X-ray transients, as well as for permanent monitoring of Galactic center area. This telescope is based on Lobster Eye X-ray optics together with pixel detector based on the Timepix3 Quad detector. Rapid follow-up observation by soft X-ray spectroscopy is enabled by a second X-ray spectroscopic telescope with limited FOV (Field of View) of several arcmins with no spatial and/or angular resolution. The spectroscopic telescope uses condenser optics based on replicated parabolic total reflection system (or, alternatively, Wolter system) and a Ketek X-ray SDD detector with energy resolution of about 130 eV as a detector. In addition to technical and instrumental aspects, observational strategy and astrophysical issues and justifications are also addressed in the paper.
1 March 2019 in e-Journal of Nondestructive Testing
The key component of any CT (X-ray computed tomography) machine is a detection system. In area of scientific CT imaging applications three types of sensors are mainly used. These are amorphous silicon (α-Si) flat panels, complementary metal–oxide–semiconductor (CMOS) and charge-coupled device (CCD) sensors. Here the performance and comparison study of the two lastly named sensor types is conducted in field of high resolution CT imaging. CCD and novel sCMOS-based (scientific CMOS) detection systems are tested using high-resolution laboratory-based Rigaku nano3DX system (ability to achieve submicron voxel resolution). Properties of each camera were evaluated as well as the quality and noise properties of acquired data (both projection and CT data).
We present a Lobster Eye (LE) X-ray optics module utilizing Multi-Foil Optics (MFO) technology. Designed for CubeSat-class missions, the system is based on the Schmidt arrangement and consists of two orthogonally oriented submodules composed of smooth, gold-coated glass foils. This configuration enables wide-field X-ray imaging with a short focal length of 400 mm and a characteristic cross-shaped focal spot. Key optical parameters, including focal length, full width at half maximum (FWHM), angular resolution, field of view (FOV), and effective area, have been experimentally verified in a vacuum setup using various X-ray sources and detectors. The Lobster Eye (LE) X-ray optics is ready for integration into a CubeSat demonstrator.