Maleic anhydride-diethylenetriamine grafted on starch (st-g-(MA-DETA)) was synthesized through graft copolymerization, and the different parameters (copolymerization temperature, reaction time, concentration of initiator and monomer concentration) affecting starch graft percentage were studied to achieve the maximum grafting percentage. The maximum grafting percentage was found to be 29.17%. The starch and grafted starch copolymer were characterized using XRD, FTIR, SEM, EDS, NMR, and TGA analytical techniques to describe copolymerization. The crystallinity of starch and grafted starch was studied by XRD, confirming that grafted starch has a semicrystalline nature and indicating that the grafting reaction took place typically in the amorphous region of starch. NMR and IR spectroscopic techniques confirmed the successful synthesis of the st-g-(MA-DETA) copolymer. A TGA study revealed that grafting affects the thermal stability of starch. An SEM analysis showed the microparticles are distributed unevenly. Modified starch with the highest grafting ratio was then applied to celestine dye removal from water using different parameters. The experimental results indicated that St-g-(MA-DETA) has excellent dye removal properties in comparison to native starch.

To explore the adsorption of Congo red (CR) dye from textile effluent, natural clay glauconite was employed as a sustainable and inexpensive adsorbent. The effects of varying concentrations of sodium hydroxide (NaOH) on glauconite alteration were examined. Furthermore, this research focuses on the optimal NaOH concentration that improves removal efficiency and adsorption capacity. Thus, four NaOH solutions of concentrations ranging from 1 M to 4 M were used to activate glauconite raw (GL), indicated as GLACT1M, GLACT2M, GLACT3M, and GLACT4M. These samples were characterized using different analysis tools. The effects of starting concentration, adsorption time, adsorbent dosage, pH, temperature, and reusability on removal efficacy were all investigated. The data show that the CR removal efficiency increases with modification up to a 2 M NaOH activation, beyond which it begins to decrease. At 25 °C and pH 7, the CR removal efficiencies were ~77%, 72%, 80%, 34.5%, and 30.5% by GL, GLACT1M, GLACT2M, GLACT3M, and GLACT4M, respectively. Batch experiments were performed to explore both the kinetics and isotherms of CR adsorption to determine the impact of different experimental conditions accurately. Moreover, isotherm interpretations demonstrated that the Freundlich isotherm closely matches the experimental results. The pseudo-second-order model clearly explains the obtained results (R² = 0.998) from 5 to 25 ppm for GL, GLACT1M, GLACT2M, and GLACT3M, but GLACT4 is expressed by the Elovich model from 20 to 25 ppm. The reusability investigation revealed that the reusability of adsorbents could be achieved efficiently. The findings suggest that glauconite and its NaOH-activated forms can be employed as natural and affordable adsorbents for removing CR from textile effluent.