Global coal consumption is continuously increasing. It is still the primary fuel used in power plants. Despite policies in the European Union aimed at reducing coal consumption, there are countries in the world where coal use continues to rise (China and India are the largest consumers of coal). Coal combustion produces waste, 70% of which is fly ash. It consists mainly of SiO2 and Al2O3. Fly ash also includes Fe2O3, TiO2, MgO, K2O, and CaO. This article describes various methods of using fly ash. Fly ash can be used in the cement industry, as a filler in materials, in zeolite synthesis, in cenosphere separation, in agriculture, in water purification, in road construction as an asphalt filler, and in mine backfilling. An interesting method of using fly ash as a filler in the production of rigid polyurethane foam was also described. The article concerns potential uses in accordance with the principles of a Circular Economy. The environmental, energy, and material aspects are discussed.
There is currently a growing demand for more effective thermal insulation materials with the best performance properties. This research paper presents the investigation results on the influence of two types of filler on the structure and properties of rigid polyurethane foam composites. Fly ash as a product of coal combustion in power plants and microspheres of 5, 10, 15, and 20 wt.%, were used as rigid polyurethane foams modifiers. The results of thermal analysis, mechanical properties testing, and cellular structure investigation performed for polyurethane composites show that the addition of fly ash, up to 10 wt.%, significantly improved the majority of the tested parameters. The use of up to 20 wt.% of microspheres improves the mechanical and thermal properties and thermal stability of rigid polyurethane foams.
The aim of the article is to compare two types of fly ash (from the fluidized and pulverized coal combustion process) as a filler for rigid polyurethane foam. Pulverized fly ash (PFA) is widely used in building materials, while fluidized fly ash (FFA) is not currently recycled, but landfilled. The produced rigid polyurethane foams were reinforced with 5 and 10% by weight addition of fly ash from two different types of boilers. The foaming process, physical properties, morphologies and thermal degradation were subject to comparative analysis. The research indicated that fly ash intensifies the reactions of foam synthesis, most commonly, polyurethane (PU) foam with an addition of 10% PFA. What is interesting is that both ashes can be used in PU foam technology as they do not cause deterioration of the physical parameters. As shown, the addition of filler affects the morphology and impairs the brittleness. Additionally, the use of fly ash from coal combustion in the technology of polyurethane materials complies with the guidelines of the circular economy stated in the European Union legislation. Partial replacement of petrochemical components with waste filler also reduces the total energy consumption in the production of PU composites.
In agricultural biogas plants, besides biogas, the by-product digestate is also produced. Due to its high moisture content and organic origin, it can successfully be applied in the hydrothermal carbonization process to avoid the fate of landfilling. This paper reviews the properties of agricultural digestate and its hydrothermal conversion (HTC) into hydrochar and process water. The type of feedstock and the parameters of the HTC process, such as temperature, pressure and residence time, affects the physical and chemical characteristics of hydrochar. Therefore, its possible application might be as a biofuel, fertilizer, soil improver, adsorber, or catalyst. In this paper, the properties of hydrochar derived from agricultural digestate are widely discussed.