The use of exoskeletons by the elderly, disabled people, heavy labor workers, and soldiers can have great social and economic benefit. However, limitations in usability are impeding the widespread adoption of exoskeletal devices. Kinematic compatibility, comfort, volume, mass, simplicity, expandability, and the ability to transmit forces, relative angles between the exoskeleton and the human, and the donning and doffing procedure need to be considered. Over the last decades, a large number of exoskeletons have been developed, to assert kinematic compatibility and compensate for misalignment. To such a degree, that it has become difficult to keep an overview of the different strategies. Therefore, this review article presents an extensive overview of different misalignment compensation strategies existing in the literature. Further, these strategies are organized in nine categories, evaluated and discussed around the exoskeleton's application domain and its specific requirements and needs.
15 March 2022 in IEEE Transactions on Biomedical Engineering
Objective: This paper assesses the effect of a passive shoulder exoskeleton prototype, Exo4Work, on muscle activity, muscle fatigue and subjective experience during simulated occupational overhead and non-overhead work. Methods: Twenty-two healthy males performed six simulated industrial tasks with and without Exo4Work exoskeleton in a randomized counterbalanced cross-over design. During these tasks electromyography, heart rate, metabolic cost, subjective parameters and performance parameters were acquired. The effect of the exoskeleton and the body side on these parameters was investigated. Results: Anterior deltoid activity and fatigue reduced up to 16% and 41%, respectively, during isometric overhead work, and minimized hindrance of the device during non-overhead tasks. Wearing the exoskeleton increased feelings of frustration and increased discomfort in the areas where the exoskeleton and the body interfaced. The assistive effect of the exoskeleton was less prominent during dynamic tasks. Conclusion: This exoskeleton may reduce muscle activity and delay development of muscle fatigue in an overhead working scenario. For dynamic applications, the exoskeleton’s assistive profile, which mimics the gravitational torque of the arm, is potentially sub-optimal. Significance: This evaluation paper is the first to report reduced muscle fatigue and activity when working with an occupational shoulder exoskeleton providing one third of the gravitational torque of the arm during overhead work. These results stress the potential of occupational shoulder exoskeletons in overhead working situations and may direct towards longitudinal field experiments. Additionally, this experiment may stimulate future work to further investigate the effect of different assistive profiles.
6 September 2021 in IEEE Transactions on Medical Robotics and Bionics
Exoskeleton technologies have the potential to reduce the prevalence of work-related musculoskeletal disorders. Despite the fast-growing industrial exoskeleton market, several bottlenecks have prevented their wide application, namely the lack of wearability, the amount of assistance they deliver and their usefulness in various working scenarios, outside of those they were specifically designed to perform. In this work we present the design, realization and evaluation of a new wearable shoulder exoskeleton that is kinematically compatible with the glenohumeral joint and features a new passive remote actuation system (pRAS). The latter has a twofold function: it delivers assistance only when needed and allows for a more convenient repositioning of the exoskeleton components, reducing the exoskeleton’s footprint and limiting the weight on the user’s arm. A test bench has been designed to validate the mechanical performance of the shoulder exoskeleton and experiments have been conducted to investigate its effect on users while executing overhead working tasks. Based on the muscle activity monitored in six subjects, we conclude that our exoskeleton reduces anterior deltoid activity by 22% during the execution of overhead work. This preliminary study suggests that our device can successfully provide relief at the level of the shoulder without hindering the subject.
This work gives an overview of all types of constant torque mechanisms (CTMs) based on both function and structure. Based on their architecture, they can be divided into five distinct categories, which all have their specific behavior. It is also shown that these CTMs can be divided into two application types, namely, power assistance or torque stabilization. Constant force mechanisms (CFMs) are more prevalent in the literature; therefore, some discussion is proposed on how CFMs can be transformed into CTMs. It is also shown that some of these CTMs have a very high specific energy, which makes them potentially interesting for use as energy storage/power providers in novel fields like robotics.
The wide adoption of occupational shoulder exoskeletons in industrial settings remains limited. Passive exoskeletons were proved effective in a limited amount of application scenarios, such as (quasi-)static overhead handling tasks. Quasi-active devices, albeit representing an improved version of their passive predecessors, do not allow full modulation of the amount of assistance delivered to the user, lacking versatility and adaptability in assisting various dynamic tasks. Active occupational shoulder exoskeletons could overcome these limitations by controlling the shape of the delivered torque profile according to the task they aim to assist. However, most existing active devices lack compactness and wearability. This prevents their implementation in working environments. In this work, we present a new active shoulder exoskeleton, named Active Exo4Work (AE4W). It features a new flexible shaft-driven remote actuation unit that allows the positioning of the motors close to the wearer’s center of mass while it maintains a kinematic structure that is compatible with the biological motion of the shoulder joint. in vitro and in vivo experiments have been conducted to investigate the performance of AE4W. Experimental results show that the exoskeleton is kinematically compatible with the user’s workspace since it does not constrain the natural range of motion of the shoulder joint. Moreover, this device can effectively provide different types of assistance while the user executes various dynamic tasks, without altering perceived comfort.
With the growing popularity of Human–Robot Interactions, a series of robotic assistive devices have been created over the last decades. However, due to the lack of easily integrable resources, the development of these custom made devices turns out to be long and expensive. Therefore, the SMARCOS, a novel off-the-shelf Smart Variable Stiffness Actuator for human-centered robotic applications is proposed in this paper. This modular actuator combines compliant elements and sensors as well as low-level controller and high-bandwidth communication. The characterisation of the actuator is presented in this manuscript, followed by two use-cases wherein the benefits of such technology can be truly exploited. The actuator provides a lightweight design that can serve as the building blocks to facilitate the development of robotic applications.