Knowledge of the wireless channel remains crucial for the development of applications such as joint communication and sensing, intelligent reflective surfaces or terahertz communications that are currently discussed as fundamental part of the sixth generation of mobile systems. To benefit from synergies, a uniform and collaborative data evaluation of measurement sets from two different time-domain channel sounders is presented in this paper. Based on a common signal processing that extracts discrete multipath components, the properties of the propagation channel are analyzed. The channels show a great variety of characteristics depending on the scenario, the line-of-sight condition and the signal-to-noise ratio requirements of the prospective communication system. Considering the impact of a realistic antenna array, the radio channel that is ultimately relevant for the communication system is examined. Having less impact due to the spatial filtering, the different characteristics of multipath propagation still emphasize the brought range of terahertz channels. The extracted multipath components are published as research data to serve the community for future analytical studies and simulations in relevant scenarios for the sixth generation of mobile systems.
17 August 2018 in IEEE Transactions on Vehicular Technology
This paper presents a comprehensive study on millimeter wave (mmWave)-based mobile hotspot network (MHN) system for high-speed train (HST) communications, including system design, field trial, channel modeling based on measurement campaign, simulation and validation. Firstly, an overview of the MHN system and the design of MHN enhanced (MHN-E) system including physical layer specification and single frequency network (SFN) are provided. Secondly, the overall design of prototypes for MHN conventional (MHN-C) and MHN-E systems are presented, and then the recent experimental results of a field trial conducted at Seoul subway line 8 with the MHN-C prototype and demonstrations with the MHN-E prototype are analyzed. Thirdly, the paper presents a measurement campaign investigating channel characteristics of a rural HST environment and a QuaDRiGa-based channel model developed based on the parameters extracted from the measurements. Lastly, a computer simulation is conducted to validate the performance of the MHN-E system at high-mobility of up to 500 km/h under the QuaDRiGa channel model, which suggests a good methodology for the validation of HST communication systems at the high-mobility since it is impractical to be tested by real testbeds as of now. The simulation results revealed that the MHN-E system is capable of providing a broadband mobile wireless backhaul (MWB) with a peak data rate exceeding 5 Gbps at a speed of 500 km/h.
The reconfigurable intelligent surface (RIS) technology is a potential solution to enhance network capacity and coverage without significant investment into additional infrastructure in 6G networks. This work highlights the interest of the mobile communication industry on RIS, and discusses the development of liquid crystal-based RIS for improved energy efficiency and coverage in the millimeter-wave band. Furthermore, the paper discusses perspectives and insights from an industry R&D point of view, addressing relevant use cases, technical requirements, implementation challenges, and practical considerations for RIS deployment optimization in the context of 6G networks. A hardware design of a RIS with liquid crystal at 28 GHz is presented. A propagation model for RIS as a new part in the system architecture is discussed with the approaches of semi-empirical models, geometric models and its combination by the application of artificial intelligence / machine learning. Finally, a channel model for deployment optimization and dimensioning is presented with the findings that rather large RIS is in favor for coverage improvement as well as a greater attenuation at higher frequencies combined with a smaller RIS size.
In order to support the development of channel models for higher frequency bands, multiple urban microcellular measurement campaigns have been carried out in Berlin, Germany, at 60 and 10 GHz. In this paper, the collected data is uniformly analyzed with focus on the path loss (PL) and the delay spread (DS). It reveals that the ground reflection has a dominant impact on the fading behavior. For line-of-sight conditions, the PL exponents are close to free space propagation at 60 GHz, but slightly smaller (1.62) for the street canyon at 10 GHz. The DS shows a clear dependence on the scenario (median values between 16 and 38 ns) and a strong distance dependence for the open square and the wide street canyon. The dependence is less distinct for the narrow street canyon with residential buildings. This behavior is consistent with complementary ray tracing simulations, though the simplified model tends to overestimate the DS.
26 September 2023 in IEEE Internet of Things Journal
The Industrial Internet of Things (IIoT) enables machines to communicate robustly. High reliability, high throughput, and low latency are the critical capabilities of IIoT, which have posed great challenges to existing wireless solutions for industrial applications. Due to the vast available bandwidth, the emerging millimeter-wave (mmWave) technology is promising to address this bottleneck. However, the propagation behaviors at such high frequencies in the harsh industrial environment have yet been well understood. In this work, extensive measurements have been conducted in a representative industrial application scenario using a 2-GHz wideband directional channel sounder in the 28-GHz mmWave band. By exploiting the measurement with excellent resolution, the multipath components’ (MPCs) delay-angular space is transformed onto the scatter points (SPs) in the propagation environment. An effective clustering algorithm is then proposed to cluster the SPs without prior knowledge and iterations. Through a geometrical optics analysis, the SP clusters are classified corresponding to the reflectors. By doing this, the cluster-generating reflectors are reduced to a quasi-deterministic (QD) channel model that ensures spatial consistency and MPCs’ stochastic dispersion. Finally, it is shown that the measurement data agrees well with the proposed QD model, indicating the high fidelity of the proposed model.
This paper gives a review of important aspects and current developments in 60 GHz broadband communication. We present channel measurement results for a conference room and analyze the channel capacity. The results clearly demonstrate the capability of the 60 GHz approach. Finally, we outline a concept for a wireless 60 GHz in-flight entertainment system.