Atsuko Sekiguchi

Dr. Atsuko Sekiguchi


Research Focus & Metrics

Academic Career Length

27Years (2000-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
23 July 2013 in Nature Communications
Verified
Journal Article
Open access
SCSubramaniam Chidambaranathapillai
Subramaniam Chidambaranathapillai
TYTakeo Yamada
Takeo Yamada
KKKazufumi Kobashi
Kazufumi Kobashi
ASAtsuko Sekiguchi
Atsuko Sekiguchi
Don FutabaDon Futaba
Don Futaba
KHKenji Hata
Kenji Hata
Increased portability, versatility and ubiquity of electronics devices are a result of their progressive miniaturization, requiring current flow through narrow channels. Present-day devices operate close to the maximum current-carrying-capacity (that is, ampacity) of conductors (such as copper and gold), leading to decreased lifetime and performance, creating demand for new conductors with higher ampacity. Ampacity represents the maximum current-carrying capacity of the object that depends both on the structure and material. Here we report a carbon nanotube-copper composite exhibiting similar conductivity (2.3-4.7 × 10(5) S cm(-1)) as copper (5.8 × 10(5) S cm(-1)), but with a 100-times higher ampacity (6 × 10(8) A cm(-2)). Vacuum experiments demonstrate that carbon nanotubes suppress the primary failure pathways in copper as observed by the increased copper diffusion activation energy (~2.0 eV) in carbon nanotube-copper composite, explaining its higher ampacity. This is the only material with both high conductivity and high ampacity, making it uniquely suited for applications in microscale electronics and inverters.

28 November 2018 in Royal Society Open Science
Verified
Journal Article
Open access
RSRajyashree Sundaram
Rajyashree Sundaram
ASAtsuko Sekiguchi
Atsuko Sekiguchi
MSMizuki Sekiya
Mizuki Sekiya
TYTakeo Yamada
Takeo Yamada
KHKenji Hata
Kenji Hata
We present research progress made in developing copper/carbon nanotube composites (Cu/CNT) to fulfil a growing demand for lighter copper substitutes with superior electrical, thermal and mechanical performances. Lighter alternatives to heavy copper electrical and data wiring are needed in automobiles and aircrafts to enhance fuel efficiencies. In electronics, better interconnects and thermal management components than copper with higher current- and heat-stabilities are required to enable device miniaturization with increased functionality. Our literature survey encouragingly indicates that Cu/CNT performances (electrical, thermal and mechanical) reported so far rival that of Cu, proving the material's viability as a Cu alternative. We identify two grand challenges to be solved for Cu/CNT to replace copper in real-life applications. The first grand challenge is to fabricate Cu/CNT with overall performances exceeding that of copper. To address this challenge, we propose research directions to fabricate Cu/CNT closer to ideal composites theoretically predicted to surpass Cu performances (i.e. those containing uniformly distributed Cu and individually aligned CNTs with beneficial CNT–Cu interactions ). The second grand challenge is to industrialize and transfer Cu/CNT from lab bench to real-life use. Toward this, we identify and propose strategies to address market-dependent issues for niche/mainstream applications. The current best Cu/CNT performances already qualify for application in niche electronic device markets as high-end interconnects. However, mainstream Cu/CNT application as copper replacements in conventional electronics and in electrical/data wires are long-term goals, needing inexpensive mass-production by methods aligned with existing industrial practices. Mainstream electronics require cheap CNT template-making and electrodeposition procedures, while data/electrical cables require manufacture protocols based on co-electrodeposition or melt-processing. We note (with examples) that initiatives devoted to Cu/CNT manufacturing for both types of mainstream applications are underway. With sustained research on Cu/CNT and accelerating its real-life application, we expect the successful evolution of highly functional, efficient, and sustainable next-generation electrical and electronics systems.

9 October 2015 in Nanoscale
Verified
Journal Article
Closed access
PDF file
SCSubramaniam Chidambaranathapillai
Subramaniam Chidambaranathapillai
ASAtsuko Sekiguchi
Atsuko Sekiguchi
TYTakeo Yamada
Takeo Yamada
Don FutabaDon Futaba
Don Futaba
KHKenji Hata
Kenji Hata
The realization of nanoscale, multi-dimensional patternability of CNT–Cu conductive lines which exhibit superior ampacity and high-temperature stability compared to Cu is reported.

24 August 2017 in Scientific Reports
Verified
Journal Article
Open access
PDF file
RSRajyashree Sundaram
Rajyashree Sundaram
TYTakeo Yamada
Takeo Yamada
KHKenji Hata
Kenji Hata
ASAtsuko Sekiguchi
Atsuko Sekiguchi
We report ultralong conducting lightweight multiwall carbon nanotube (MWCNT)-Cu composite wires with MWCNTs uniformly distributed in a continuous Cu matrix throughout. With a high MWCNT vol% (40–45%), the MWCNT-Cu wire density was 2/3rd that of Cu. Our composite wires show manufacturing potential because we used industrially compatible Cu electrodeposition protocols on commercial CNT wires. Further, we systematically varied Cu spatial distribution on the composite wire surface and bulk and measured the associated electrical performance, including resistivity (ρ), temperature dependence of resistance, and stability to current (measured as current carrying capacity, CCC in vacuum). We find that a continuous Cu matrix with homogeneous MWCNT distribution, i.e., maximum internal Cu filling within MWCNT wires, is critical to high overall electrical performances. Wires with maximum internal Cu filling exhibit (i) low room temperature ρ, 1/100th of the starting MWCNT wires, (ii) suppressed resistance-rise with temperature-increase and temperature coefficient of resistance (TCR) ½ that of Cu, and (iii) vacuum-CCC 28% higher than Cu. Further, the wires showed real-world applicability and were easily soldered into practical circuits. Hence, our MWCNT-Cu wires are promising lightweight alternatives to Cu wiring for weight-reducing applications. The low TCR is specifically advantageous for stable high-temperature operation, e.g., in motor windings.

7 July 2015 in Advanced Energy Materials
Verified
Journal Article
Closed access
PDF file
KLKarolina U. Laszczyk
Karolina U. Laszczyk
KKKazufumi Kobashi
Kazufumi Kobashi
SSShunsuke Sakurai
Shunsuke Sakurai
ASAtsuko Sekiguchi
Atsuko Sekiguchi
Don FutabaDon Futaba
Don Futaba
KHKenji Hata
Kenji Hata

22 August 2001 in Applied Physics Letters
Verified
Journal Article
Closed access
PDF file
ASAtsuko Sekiguchi
Atsuko Sekiguchi
JKJ. Koike
J. Koike
SKS. Kamiya
S. Kamiya
MSM. Saka
M. Saka
KMK. Maruyama
K. Maruyama
A void formation mechanism was investigated in an electroplated copper thin film on Ta/SiO2/Si. Microstructural observation after thermal cycling indicated that void formation occurred at intersecting points or terminating corners of annealing twins. The calculated stress distribution was compared with experimental results of the void formation tendency. An excellent correlation was found between void formation sites and stress concentration sites. Electron diffraction analysis revealed that most twin interfaces in Cu thin films are incoherent {322} planes. The stress concentration drives diffusion along incoherent twin interfaces of {322} and leads to void formation at twin interfaces and corners.