Composite materials have been used to structurally repair piping and other facilities for many years. However, the original use of composite materials was for repairing corroded pipelines where the intent was to restore strength to the damaged section of the pipeline. In addition to repairing corrosion, composite materials have successfully been used to repair dents, wrinkle bends, induction bends, and pipe fittings including elbows and tees as well as repair of offshore risers. In this study, the behavior of circumferential through cracks in repaired pipe with bonded composite wrap subjected to bending moment is investigated using three-dimensional finite-element analysis. The stress intensity factor (SIF) is utilized as a fracture criterion. The effects of the mechanical and geometrical properties of the adhesive on the variation of the SIF at the crack front were also analyzed. The obtained results show that the presence of the bonded composite repair significantly reduces the SIF, which can improve the residual lifespan of the pipe. Meanwhile, the SIF is also reduced as the elastic and the geometrical wrap properties are improved, particularly when the Young's modulus of the adhesive and the wrap thickness are increased.
3 April 2014 in Journal of Pressure Vessel Technology
The use of composite systems as a repair methodology in the pipeline industry has grown in recent years. In this study, the analysis of the behavior of circumferential through cracks in repaired pipe with bonded composite wrap subjected to internal pressure is performed using three-dimensional finite element analysis. The fracture criterion used in the analysis is the stress intensity factor (SIF). The obtained results show that the bonded composite repair reduces significantly the stress intensity factor at the tip of repaired cracks in the steel pipe, which can improve the residual lifespan of the pipe.
Repair of aeronautical structures by composite patch bonding has shown its effectiveness in several studies during the last few decades. This repair technique leads to a retardation in the propagation of repaired cracks via load bridging across the patch throughout the adhesive layer, interfacing it with the repaired structure. The purpose of this study is to analyze the behavior of patch-repaired cracks present in thin plates made of aluminum alloy 7075-T6 and subjected to a single tensile overload. The sequence of application of overload on the fatigue behavior was also studied. Fatigue tests were conducted on Al 7075-T6 notched specimens where crack growth and number of cycles to failure were monitored for different patching/overload scenarios. A detailed fractographic study was performed on failed specimens to analyze the micromechanical behavior of the crack growth related to each scenario. The obtained results showed that the application of the overload before bonding the patch leads to an almost infinite fatigue life of the repaired plates.