It is crucial to detect and classify industrial heat sources for sustainable industrial development. Sustainable Development Science Satellite 1 (SDGSAT-1) thermal infrared spectrometer (TIS) data were first introduced for detecting industrial heat source production areas to address the difficulty in identifying factories with low combustion temperatures and small scales. In this study, a new industrial heat source identification and classification model using SDGSAT-1 TIS and Landsat 8/9 Operational Land Imager (OLI) data was proposed to improve the accuracy and granularity of industrial heat source recognition. First, multiple features (thermal and optical features) were extracted using SDGSAT-1 TIS and Landsat 8/9 OLI data. Second, an industrial heat source identification model based on a support vector machine (SVM) and multiple features was constructed. Then, industrial heat sources were generated and verified based on the topological correlation between the identification results of the production areas and Google Earth images. Finally, the industrial heat sources were classified into six categories based on point-of-interest (POI) data. The new model was applied to the Beijing–Tianjin–Hebei (BTH) region of China. The results showed the following: (1) Multiple features enhance the differentiation and identification accuracy between industrial heat source production areas and the background. (2) Compared to active-fire-point (ACF) data (375 m) and Landsat 8/9 thermal infrared sensor (TIRS) data (100 m), nighttime SDGSAT-1 TIS data (30 m) facilitate the more accurate detection of industrial heat source production areas. (3) Greater than 2~6 times more industrial heat sources were detected in the BTH region using our model than were reported by Ma and Liu. Some industrial heat sources with low heat emissions and small areas (53 thermal power plants) were detected for the first time using TIS data. (4) The production areas of cement plants exhibited the highest brightness temperatures, reaching 301.78 K, while thermal power plants exhibited the lowest brightness temperatures, averaging 277.31 K. The production areas and operational statuses of factories could be more accurately identified and monitored with the proposed approach than with previous methods. A new way to estimate the thermal and air pollution emissions of industrial enterprises is presented.

In the “2030 Agenda for Sustainable Development” proposed by the United Nations, there are several Sustainable Development Goals (SDGs) related to the sustainable development of urbanization. Therefore, this paper combines remote sensing products and statistics data; uses the entropy weight method to construct a comprehensive assessment framework for the sustainable development of urbanization in Hainan Island based on 11 SDGs; and conducts a spatial and temporal analysis of Hainan Island from 2011 to 2020. The assessment scores of the study area are distributed spatially in a pattern that scores high in the north and south and low in the middle and west. In terms of SDGs’ progress, each region faces its own challenges and needs to develop under its own status. For Wuzhishan City and Ding’an County, which scored low in the assessment, newly increased fixed assets, per capita public green areas and the rate of science and technology expenditures to local government expenditures are the main factors affecting the assessment scores.

The complexity of scene images makes the research on remote-sensing image scene classification challenging. With the wide application of deep learning in recent years, many remote-sensing scene classification methods using a convolutional neural network (CNN) have emerged. Current CNN usually output global information by integrating the depth features extricated from the convolutional layer through the fully connected layer; however, the global information extracted is not comprehensive. This paper proposes an improved remote-sensing image scene classification method based on a global self-attention module to address this problem. The global information is derived from the depth characteristics extracted by the CNN. In order to better express the semantic information of the remote-sensing image, the multi-head self-attention module is introduced for global information augmentation. Meanwhile, the local perception unit is utilized to improve the self-attention module’s representation capabilities for local objects. The proposed method’s effectiveness is validated through comparative experiments with various training ratios and different scales on public datasets (UC Merced, AID, and NWPU-NESISC45). The precision of our proposed model is significantly improved compared to other methods for remote-sensing image scene classification.

Industrial heat sources (IHSs) are key contributors to anthropogenic heat, air pollution, and carbon emissions. Accurately and automatically detecting their production areas (IHSPAs) on a large scale is vital for environmental monitoring and decision making, yet this is challenged by the lack of high-resolution thermal data. Sustainable Development Science Satellite 1 (SDGSAT-1) thermal infrared spectrometer (TIS) data with the highest resolution (30 m) in the civilian field and a three-band advantage were first introduced to detect IHSPAs. In this study, an IHSPA identification model using multi-features extracted from SDGSAT-1 TIS and Landsat OLI data and support vector machine (SVM) was proposed. First, three brightness temperatures and four thermal radiation indices using SDGSAT-1 TIS and Landsat OLI data were designed to enlarge the temperature difference between IHSPAs and the background. Then, 10 features combined with three indices from Landsat OLI images with the same spatial resolution (30 m) and stable data were extracted. Second, an IHSPA identification model based on SVM and multi-feature extraction was constructed to identify IHSPAs. Finally, the IHS objects were manually delineated and verified using the identified IHSPAs and Google Earth images. Some conclusions were obtained from different comparisons in Wuhai, China: (1) IHSPA identification based on SVM using thermal and optical features can detect IHSPAs and obtain the best results compared with different features and identification models. (2) The importance of using thermal features from the SDGSAT-1 TIS to detect IHSPAs was demonstrated by different importance analysis methods. (3) Our proposed method can detect more IHSs, with greater spatial coverage and smaller areas, compared with the methods of Ma and Liu. This new way to detect IHSPAs can obtain higher-spatial-resolution emissions of IHSs on a large scale and help decision makers target environmental monitoring, management, and decision making in industrial plant processing.

Remote sensing of the geological environment (GERS) interpretation contributes to lithological mapping, disaster prediction, soil erosion monitoring, etc. However, the rich diversity, complex distribution, inter-class similarities, and uncertainties in data quality of geological elements pose challenges to GERS interpretation. Additionally, current automatic feature extraction of GERS elements, which rely on deep learning (DL) and remote sensing information process technologies, often require sufficient labeled data. Due to the enormous labor cost and specialized expertise needed, labeled GERS samples are limited to training the data-driven models. To tackle the above challenges, we introduce the semi-supervised Dual-Model Progressive Self-Training (DM-ProST) framework. This framework employs two DL networks with different initializations as evaluator models to correct each other. A sample filtering strategy is then implemented to evaluate the quality of unlabeled samples, selecting high-quality and reliable ones to expand the training set. Additionally, a fully connected conditional random field module (CRF) is incorporated to optimize DL network prediction maps, thereby enhancing the boundary performance of segmentation results. The framework utilizes a multi-task loss function that combines consistency loss with cross-entropy, enabling the models to learn discriminative GERS features. This process accurately generates pseudo-labels and achieves precise lithology mapping of GERS with a small amount of annotation samples. Finally, we conducted an experimental evaluation on the Landsat 8 dataset in Xinjiang, China, and massive experiments proved the effectiveness of DM-ProST.

Urban electricity power consumption (EPC) prediction plays a crucial role in urban management and sustainable development. Nighttime light (NTL) remote sensing imagery has demonstrated significant potential in estimating urban EPC due to its strong correlation with human activities and energy use. However, most existing models focus on annual-scale estimations, limiting their ability to capture month-scale EPC. To address this limitation, a novel monthly EPC prediction model that incorporates monthly average temperature, and the interaction between NTL data and temperature was proposed in this study. The proposed method was applied to cities within the Yangtze River Delta (YRD) urban agglomeration, and was validated using datasets constructed from NPP/VIIRS and SDGSAT-1 satellite imageries, respectively. For the NPP/VIIRS dataset, the proposed method achieved a Mean Absolute Relative Error (MARE) of 7.96% during the training phase (2017–2022) and of 10.38% during the prediction phase (2023), outperforming the comparative methods. Monthly EPC spatial distribution maps from VPP/VIIRS data were generated, which not only reflect the spatial patterns of EPC but also clearly illustrate the temporal evolution of EPC at the spatial level. Annual EPC estimates also showed superior accuracy compared to three comparative methods, achieving a MARE of 7.13%. For the SDGSAT-1 dataset, leave-one-out cross-validation confirmed the robustness of the model, and high-resolution (40 m) monthly EPC maps were generated, enabling the identification of power consumption zones and their spatial characteristics. The proposed method provides a timely and accurate means for capturing monthly EPC dynamics, effectively supporting the dynamic monitoring of urban EPC at the monthly scale in the YRD urban agglomeration.