Purpose: Technological capabilities of manufacturing microelectromechanical system (MEMS) gyroscopes are still insufficient if compared to manufacturing high-efficient gyroscopes and accelerometers. This creates weaknesses in their mechanical structure and restrictions in the measurement accuracy, stability and reliability of MEMS gyroscopes and accelerometers. This paper aims to develop a new architectural solutions for optimization of MEMS gyroscopes and accelerometers and propose a multi-axis MEMS inertial module combining the functions of gyroscope and accelerometer. Design/methodology/approach: The finite element modeling (FEM) and the modal analysis in FEM are used for sensing, drive and control electrode capacitances of the multi-axis MEMS inertial module with the proposed new architecture. The description is given to its step-by-step process of manufacturing. Algorithms are developed to detect its angular rates and linear acceleration along three Cartesian axes. Findings: Experimental results are obtained for eigenfrequencies and capacitances of sensing, drive and control electrodes for 50 manufactured prototypes of the silicon electromechanical sensor (SES). For 42 SES prototypes, a good match is observed between the calculated and simulated capacitance values of comb electrodes. Thus, the mean-square deviation is not over 20 per cent. The maximum difference between the calculated and simulated eigenfrequencies in the drive channel of 11 SES prototypes is not over 3 per cent. The same difference is detected for eigenfrequencies in the first sensing channel of 17 SES prototypes. Originality/value: This study shows a way to design and optimize the structure and theoretical background for the development of the MEMS inertial module combining the functions of gyroscope and accelerometer. The obtained results will improve and expand the manufacturing technology of MEMS gyroscopes and accelerometers.
This work presents a process design kit (PDK) for a 0.15 μm GaAs pHEMT process for low-noise MMIC applications developed for AWR Microwave Office (MWO). A complete set of basic elements is proposed, such as TaN thin film resistors and mesa-resistors, capacitors, inductors, and transistors. The developed PDK can be used in technology transfer or education.
When modern infocommunication networks are designed, the combination of several data transfer channels is widely used. It is necessary for the purposes of improvement in quality and robustness of communication. Communication systems based on more than one data transfer channel are named heterogeneous communication systems. For the design of a heterogeneous network, the most optimal solution is the use of mesh technology. Mesh technology ensures message delivery to the destination under conditions of unpredictable interference environment situation in each of two channels. Therewith, one of the high-priority problems is the choice of a routing protocol when the mesh networks are designed. An important design stage for any computer network is modeling. Modeling allows us to design a few different variants of design solutions and also to compute all necessary functional specifications for each of these solutions. As a result, it allows us to reduce costs for the physical realization of a network. In this article the research of dynamic routing in the NS3 simulation modeling framework is presented. The article contains an evaluation of simulation modeling applicability in solving the problem of heterogeneous networks design. Results of modeling may be afterwards used for physical realization of this kind of networks.
The present paper deals with the quality assessment of PLC channel which is a part of fault-tolerant self-organizing heterogeneous communication system. The PLC implementation allows to reduce exploitation costs when constructing new info-communication networks. PLC is used for transmitting information between various devices in alternating current mains. There exist different approaches to transfer information over power lines. Their differences resulted from the requirements of typical apps which use PLC as a data transmission channel. In the process of research described in this paper, the simulation of a signal in AC mains with regard to different kinds of noise caused by power line loads was performed.