Holger Heuermann

Prof. Dr. Holger Heuermann

Department of Microwave and Plasma Technology, IMP, FH Aachen University of Applied Sciences, 52066 Aachen, Germany

Research Focus & Metrics

Academic Career Length

20Years (2007-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
12 April 2021 in International Journal of Microwave and Wireless Technologies
Verified
Journal Article
Open access
PDF file
THThomas Harzheim
Thomas Harzheim
MMMarc Mühmel
Marc Mühmel
HHHolger Heuermann
Holger Heuermann
This paper introduces a new maritime search and rescue system based on S-band illumination harmonic radar (HR). Passive and active tags have been developed and tested while attached to life jackets and a small boat. In this demonstration test carried out on the Baltic Sea, the system was able to detect and range the active tags up to a distance of 5800 m using an illumination signal transmit-power of 100 W. Special attention is given to the development, performance, and conceptual differences between passive and active tags used in the system. Guidelines for achieving a high HR dynamic range, including a system components description, are given and a comparison with other HR systems is performed. System integration with a commercial maritime X-band navigation radar is shown to demonstrate a solution for rapid search and rescue response and quick localization.

22 June 2022 in C
Verified
Journal Article
Open access
PDF file
AHAndreas Hoffmann
Andreas Hoffmann
MUMatthias Uhl
Matthias Uhl
MCMaximilian Ceblin
Maximilian Ceblin
FRFelix Rohrbach
Felix Rohrbach
JBJoachim Bansmann
Joachim Bansmann
AKAlexander J. C. Kuehne
Alexander J. C. Kuehne
Carbon nanofibers are produced from dielectric polymer precursors such as polyacrylonitrile (PAN). Carbonized nanofiber nonwovens show high surface area and good electrical conductivity, rendering these fiber materials interesting for application as electrodes in batteries, fuel cells, and supercapacitors. However, thermal processing is slow and costly, which is why new processing techniques have been explored for carbon fiber tows. Alternatives for the conversion of PAN-precursors into carbon fiber nonwovens are scarce. Here, we utilize an atmospheric pressure plasma jet to conduct carbonization of stabilized PAN nanofiber nonwovens. We explore the influence of various processing parameters on the conductivity and degree of carbonization of the converted nanofiber material. The precursor fibers are converted by plasma-jet treatment to carbon fiber nonwovens within seconds, by which they develop a rough surface making subsequent surface activation processes obsolete. The resulting carbon nanofiber nonwovens are applied as supercapacitor electrodes and examined by cyclic voltammetry and impedance spectroscopy. Nonwovens that are carbonized within 60 s show capacitances of up to 5 F g−1.

4 July 2022 in IEEE Transactions on Plasma Science
Verified
Journal Article
Closed access
HHHolger Heuermann
Holger Heuermann
TEThomas Emmrich
Thomas Emmrich
SBSimon Bongartz
Simon Bongartz
Upcoming gasoline engines should run with a larger number of fuels beginning from petrol over methanol up to gas by a wide range of compression ratios and a homogeneous charge. In this article, the microwave (MW) spark plug, based on a high-speed frequency hopping system, is introduced as a solution, which can support a nitrogen compression ratio up to 1:39 in a chamber and more. First, an overview of the high-speed frequency hopping MW ignition and operation system as well as the large number of applications are presented. Both gives an understanding of this new base technology for MW plasma generation. Focus of the theoretical part is the explanation of the internal construction of the spark plug, on the achievable of the high voltage generation as well as the high efficiency to hold the plasma. In detail, the development process starting with circuit simulations and ending with the numerical multiphysics field simulations is described. The concept is evaluated with a reference prototype covering the frequency range between 2.40 and 2.48 GHz and working over a large power range from 20 to 200 W. A larger number of different measurements starting by vector hot- $S_{11}$ measurements and ending by combined working scenarios out of hot temperature, high pressure and charge motion are winding up the article. The limits for the successful pressure tests were given by the pressure chamber. Pressures ranged from 1 to 39 bar and charge motion up to 25 m/s as well as temperatures from 30 $^{\circ}$ to 125 $^{\circ}$ .

8 April 2024 in IEEE Transactions on Plasma Science
Verified
Journal Article
Closed access
STSamat Turdumamatov
Samat Turdumamatov
ABAljoscha Belda
Aljoscha Belda
HHHolger Heuermann
Holger Heuermann
This article addresses the need for an innovative technique in plasma shaping, utilizing antenna structures, Maxwell’s laws, and boundary conditions within a shielded environment. The motivation lies in exploring a novel approach to efficiently generate high-energy density plasma with potential applications across various fields. Implemented in an E01 circular cavity resonator, the proposed method involves the use of an impedance and field matching device with a coaxial connector and a specially optimized monopole antenna. This setup feeds a low-loss cavity resonator, resulting in a high-energy density air plasma with a surface temperature exceeding 3500 o C, achieved with a minimal power input of 80 W. The argon plasma, resembling the shape of a simple monopole antenna with modeled complex dielectric values, offers a more energy-efficient alternative compared to traditional, power-intensive plasma shaping methods. Simulations using a commercial electromagnetic (EM) solver validate the design’s effectiveness, while experimental validation underscores the method’s feasibility and practical implementation. Analyzing various parameters in an argon atmosphere, including hot S -parameters and plasma beam images, the results demonstrate the successful application of this technique, suggesting its potential in coating, furnace technology, fusion, and spectroscopy applications.

11 March 2025 in IEEE Transactions on Plasma Science
Verified
Journal Article
Closed access
HZHinner Ziegler
Hinner Ziegler
HHHolger Heuermann
Holger Heuermann
CSChristoph Schopp
Christoph Schopp
This article presents the design, development, and characterization of a plasma jet operating at 10 GHz, covering input power levels from 10 to 50 W. This work builds upon an established microwave plasma device development workflow, adapted for higher frequencies, and demonstrates its feasibility at four times the conventional frequency (2.45 GHz). Utilizing novel Hot-S measuring equipment spanning from 6 to 18 GHz, this article showcases the benefits of operating at higher frequencies. A compact plasma formation with minimal spatial expansion is observed that scales linearly with frequency above the plasma frequency, indicating improved efficiency and control over the plasma jet’s behavior. The length of the plasma increases by approximately 0.6 times relative to input power, while the width remains almost constant, suggesting optimal performance across the studied power range. Furthermore, temperature measurements using a ceramic cannula provide the temperature generated by the plasma.

15 December 2021 in Remote Sensing
Verified
Journal Article
Open access
PDF file
HHHolger Heuermann
Holger Heuermann
THThomas Harzheim
Thomas Harzheim
TCTobias Cronenbroeck
Tobias Cronenbroeck
This paper presents a new SIMO radar system based on a harmonic radar (HR) stepped frequency continuous wave (SFCW) architecture. Simple tags that can be electronically individually activated and deactivated via a DC control voltage were developed and combined to form an MO array field. This HR operates in the entire 2.45 GHz ISM band for transmitting the illumination signal and receives at twice the stimulus frequency and bandwidth centered around 4.9 GHz. This paper presents the development, the basic theory of a HR system for the characterization of objects placed into the propagation path in-between the radar and the reflectors (similar to a free-space measurement with a network analyzer) as well as first measurements performed by the system. Further detailed measurement series will be made available later on to other researchers to develop AI and machine learning based signal processing routines or synthetic aperture radar algorithms for imaging, object recognition, and feature extraction. For this purpose, the necessary information is published in this paper. It is explained in detail why this SIMO-HR can be an attractive solution augmenting or replacing existing systems for radar measurements in production technology for material under test measurements and as a simplified MIMO system. The novel HR transfer function, which is a basis for researchers and developers for material characterization or imaging algorithms, is introduced and metrologically verified in a well traceable coaxial setup.