The circular economy plays an important role in the preparation and recycling of polymers. Research groups in different fields, such as materials science, pharmaceutical and engineering, have focused on building sustainable polymers to minimize the release of toxic products. Recent studies focused on the circular economy have suggested developing new polymeric materials based on renewable and sustainable sources, such as using biomass waste to obtain raw materials to prepare new functional bio-additives. This review presents some of the main characteristics of common polymer additives, such as antioxidants, antistatic agents and plasticizers, and recent research in developing bio-alternatives. Examples of these alternatives include the use of polysaccharides from agro-industrial waste streams that can be used as antioxidants, and chitosan which can be used as an antistatic agent.

The risk of infection arising from indirect sources—namely, contaminated surfaces—has been proved, particularly in healthcare facilities. In the attempt to minimize this problem, innumerable research projects involving the development of surfaces with self-disinfecting properties are being conducted. In this work, wall-paints with self-disinfecting properties were developed with the scope of being applied in environments prone to contamination, such as those at healthcare settings. Our approach was to develop new paint formulations containing two natural plant-based products with known antimicrobial activity—colophony (CLF) and curcumin (CUR). The natural substances were separately incorporated on a commercial paint and their antibacterial activity was evaluated with several bacterial species following ISO 22196. To assess the paints’ safety, cytotoxicity tests were performed on HaCaT and A549 cell lines, using tests on extracts and direct contact tests, as suggested by the standardized protocol ISO 10993. In general, both paints containing CLF and CUR were able to reduce the bacterial growth after 24 h, compared with the control, the commercial unmodified paint. Colophony was even able to reduce the number of culturable bacteria by over 2 log for Staphylococcus aureus, Escherichia coli, and Bacillus cereus. Regarding the cytotoxicity tests performed (WST-1, NRU, and LDH), both formulations revealed promising results regardless of the methodology used.

Biomass can be envisaged as a potential solution to mitigate the problems that the extensive exploitation of fossil sources causes on the environment. Transforming biomass into added-value products with better calorific properties is highly desired. Thermochemical liquefaction can convert biomass into a bio-oil. The work herein presented concerns the study of direct liquefaction of Eucalyptus globulus sawdust. The main goal was to optimise the operating conditions of the process to achieve high bio-oil conversion rates. Studies were carried out to understand the impact of the process factors, such as the residence time, catalyst concentration, temperature, and the biomass-to-solvent ratio. The E. globulus sawdust conversion into bio-oil was achieved with a maximum conversion of 96.2%. A higher conversion was reached when the eucalyptus sawdust’s thermochemical liquefaction was conducted over 180 min in the presence of a >2.44% catalyst concentration at 160 °C. A lower biomass-to-solvent ratio favours the process leading to a higher conversion of biomass into bio-oil. The afforded bio-oil presented a better higher heating value than that of E. globulus sawdust.

Liquefaction of biomass delivers a liquid bio-oil with relevant chemical and energetic applications. In this study we coupled it with short rotation coppice (SRC) intensively managed poplar cultivations aimed at biomass production while safeguarding environmental principles of soil quality and biodiversity. We carried out acid-catalyzed liquefaction, at 160 °C and atmospheric pressure, with eight poplar clones from SRC cultivations. The bio-oil yields were high, ranging between 70.7 and 81.5%. Average gains of bio-oil, by comparison of raw biomasses, in elementary carbon and hydrogen and high heating, were 25.6, 67, and 74%, respectively. Loss of oxygen and O/C ratios averaged 38 and 51%, respectively. Amounts of elementary carbon, oxygen, and hydrogen in bio-oil were 65, 26, and 8.7%, and HHV averaged 30.5 MJkg⁻¹. Correlation analysis showed the interrelation between elementary carbon with HHV in bio-oil or with oxygen loss. Overall, from 55 correlations, 21 significant and high correlations among a set of 11 variables were found. Among the most relevant ones, the percentage of elementary carbon presented five significant correlations with the percentage of O (−0.980), percentage of C gain (0.902), percentage of O loss (0.973), HHV gain (0.917), and O/C loss (0.943). The amount of carbon is directly correlated with the amount of oxygen, conversely, the decrease in oxygen content increases the elementary carbon and hydrogen concentration, which leads to an improvement in HHV. HHV gain showed a strong positive dependence on the percentage of C (0.917) and percentage of C gain (0.943), while the elementary oxygen (−0.885) and its percentage of O loss (0.978) adversely affect the HHV gain. Consequently, the O/C loss (0.970) increases the HHV positively. van Krevelen’s analysis indicated that bio-oils are chemically compatible with liquid fossil fuels. FTIR-ATR evidenced the presence of derivatives of depolymerization of lignin and cellulose in raw biomasses in bio-oil. TGA/DTG confirmed the bio-oil burning aptitude by the high average 53% mass loss of volatiles associated with lowered peaking decomposition temperatures by 100 °C than raw biomasses. Overall, this research shows the potential of bio-oil from liquefaction of SRC biomasses for the contribution of renewable energy and chemical deliverables, and thereby, to a greener global economy.

Environmental surface contamination with microorganisms is a serious concern worldwide. Triclosan and isoborneol present good antimicrobial activity. Their immobilisation to paint substrates allows for development of a material that stays effective over a longer time. In this work, we disclosed the preliminary studies to evaluate the antimicrobial activity of the active molecule after being functionalised with isocyanates for further immobilisation on the paint substrate. Overall, the newly developed non-release antimicrobial coating provides an effective way of preventing the spread of diseases and has been proven to inhibit bacterial growth and with a considerable antimicrobial activity towards S. aureus, E. coli, and K. variicola at the tested concentrations.