Sofia Moreira Fernandes

Ms. Sofia Moreira Fernandes

Instituto Superior Técnico, University of Lisbon
orcid

Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
28 January 2022 in Reactions
Verified
Journal Article
Open access
PDF file
HMHenrique Machado
Henrique Machado
Ana CristinoAna Cristino
Ana Cristino
Sofia Moreira FernandesSofia Moreira Fernandes
Sofia Moreira Fernandes
Rui Galhano dos SantosRui Galhano dos Santos
Rui Galhano dos Santos
Bio-oil, although rich in chemical species, is primarily used as fuel oil, due to its greater calorific power when compared to the biomass from which it is made. The incomplete understanding of how to explore its chemical potential as a source of value-added chemicals and, therefore, a supply of intermediary chemical species is due to the diverse composition of bio-oil. Being biomass-based, making it subject to composition changes, bio-oil is obtained via different processes, the two most common being fast pyrolysis and hydrothermal liquefaction. Different methods result in different bio-oil compositions even from the same original biomass. Understanding which biomass source and process results in a particular chemical makeup is of interest to those concerned with the refinement or direct application in chemical reactions of bio-oil. This paper presents a summary of published bio-oil production methods, origin biomass, and the resulting composition.

26 November 2021 in Molecules
Verified
Journal Article
Open access
PDF file
DGDiogo Gonçalves
Diogo Gonçalves
Sofia Moreira FernandesSofia Moreira Fernandes
Sofia Moreira Fernandes
SMSandro Matos
Sandro Matos
HMHenrique Machado
Henrique Machado
SVSalomé Vieira
Salomé Vieira
Rui Galhano dos SantosRui Galhano dos Santos
Rui Galhano dos Santos
Biomass thermochemical liquefaction is a chemical process with multifunctional bio-oil as its main product. Under this process, the complex structure of lignocellulosic components can be hydrolysed into smaller molecules at atmospheric pressure. This work demonstrates that the liquefaction of burned pinewood from forest fires delivers similar conversion rates into bio-oil as non-burned wood does. The bio-oils from four burned biomass fractions (heartwood, sapwood, branches, and bark) showed lower moisture content and higher HHV (ranging between 32.96 and 35.85 MJ/kg) than the initial biomasses. The increased HHV resulted from the loss of oxygen, whereas the carbon and hydrogen mass fractions increased. The highest conversion of bark and heartwood was achieved after 60 min of liquefaction. Sapwood, pinewood, and branches reached a slightly higher conversion, with yields about 8% greater, but with longer liquefaction time resulting in higher energy consumption. Additionally, the van Krevelen diagram indicated that the produced bio-oils were closer and chemically more compatible (in terms of hydrogen and oxygen content) to the hydrocarbon fuels than the initial biomass counterparts. In addition, bio-oil from burned pinewood was shown to be a viable alternative biofuel for heavy industrial applications. Overall, biomass from forest fires can be used for the liquefaction process without compromising its efficiency and performance. By doing so, it recovers part of the lost value caused by wildfires, mitigating their negative effects.

24 April 2023 in RSC Advances
Verified
Journal Article
Open access
PDF file
MVMário Vale
Mário Vale
Sofia Moreira FernandesSofia Moreira Fernandes
Sofia Moreira Fernandes
AMAntónio Mariquito
António Mariquito
LRLuis Reis
Luis Reis
Moisés Luzia PintoMoisés Luzia Pinto
Moisés Luzia Pinto
Ana C. MarquesAna C. Marques
Ana C. Marques
We control phase separation/gelation inside of emulsion droplets to reproducibly achieve SiO 2 –TiO 2 based microspheres with tailored interconnected coral-like macroporosity. These microspheres (MICROSCAFS®) are key enablers of emergent applications.

4 January 2022 in Molecules
Verified
Journal Article
Open access
PDF file
IPIvo Paulo
Ivo Paulo
LCLuis Costa
Luis Costa
Abel RodriguesAbel Rodrigues
Abel Rodrigues
Sofia Moreira FernandesSofia Moreira Fernandes
Sofia Moreira Fernandes
SMSandro Matos
Sandro Matos
Rui Galhano dos SantosRui Galhano dos Santos
Rui Galhano dos Santos
Liquefaction of biomass delivers a liquid bio-oil with relevant chemical and energetic applications. In this study we coupled it with short rotation coppice (SRC) intensively managed poplar cultivations aimed at biomass production while safeguarding environmental principles of soil quality and biodiversity. We carried out acid-catalyzed liquefaction, at 160 °C and atmospheric pressure, with eight poplar clones from SRC cultivations. The bio-oil yields were high, ranging between 70.7 and 81.5%. Average gains of bio-oil, by comparison of raw biomasses, in elementary carbon and hydrogen and high heating, were 25.6, 67, and 74%, respectively. Loss of oxygen and O/C ratios averaged 38 and 51%, respectively. Amounts of elementary carbon, oxygen, and hydrogen in bio-oil were 65, 26, and 8.7%, and HHV averaged 30.5 MJkg−1. Correlation analysis showed the interrelation between elementary carbon with HHV in bio-oil or with oxygen loss. Overall, from 55 correlations, 21 significant and high correlations among a set of 11 variables were found. Among the most relevant ones, the percentage of elementary carbon presented five significant correlations with the percentage of O (−0.980), percentage of C gain (0.902), percentage of O loss (0.973), HHV gain (0.917), and O/C loss (0.943). The amount of carbon is directly correlated with the amount of oxygen, conversely, the decrease in oxygen content increases the elementary carbon and hydrogen concentration, which leads to an improvement in HHV. HHV gain showed a strong positive dependence on the percentage of C (0.917) and percentage of C gain (0.943), while the elementary oxygen (−0.885) and its percentage of O loss (0.978) adversely affect the HHV gain. Consequently, the O/C loss (0.970) increases the HHV positively. van Krevelen’s analysis indicated that bio-oils are chemically compatible with liquid fossil fuels. FTIR-ATR evidenced the presence of derivatives of depolymerization of lignin and cellulose in raw biomasses in bio-oil. TGA/DTG confirmed the bio-oil burning aptitude by the high average 53% mass loss of volatiles associated with lowered peaking decomposition temperatures by 100 °C than raw biomasses. Overall, this research shows the potential of bio-oil from liquefaction of SRC biomasses for the contribution of renewable energy and chemical deliverables, and thereby, to a greener global economy.

1 September 2022 in Molecules
Verified
Journal Article
Open access
PDF file
AGAna R. P. Gonçalves
Ana R. P. Gonçalves
Ana RibeiroAna Ribeiro
Ana Ribeiro
Sofia Moreira FernandesSofia Moreira Fernandes
Sofia Moreira Fernandes
Luísa M.D.R.S. MartinsLuísa M.D.R.S. Martins
Luísa M.D.R.S. Martins
Ana CristinoAna Cristino
Ana Cristino
Rui Galhano dos SantosRui Galhano dos Santos
Rui Galhano dos Santos
The conversion of renewable feedstocks into new added-value products is a current hot topic that includes the biodiesel industry. When converting vegetable oils into biodiesel, approximately 10% of glycerol byproduct is produced. Glycerol can be envisaged as a chemical platform due to its chemical versatility, as a scaffold or building block, in producing a wide range of added-value chemicals. Thus, the development of sustainable routes to obtain glycerol-based products is crucial and urgent. This certainly encompasses the use of raw carbonaceous materials from biomass as heterogeneous acid catalysts. Moreover, the integration of surface functional groups, such as sulfonic acid, in carbon-based solid materials, makes them low cost, exhibiting high catalytic activity with concomitant stability. This review summarizes the work developed by the scientific community, during the last 10 years, on the use of biochar catalysts for glycerol transformation.

13 April 2023 in Forests
Verified
Journal Article
Open access
PDF file
Luciana Barbosa da SilvaLuciana Barbosa da Silva
Luciana Barbosa da Silva
Sofia Moreira FernandesSofia Moreira Fernandes
Sofia Moreira Fernandes
DGDiogo Gonçalves
Diogo Gonçalves
IPIvo Paulo
Ivo Paulo
JCJosé Condeço
José Condeço
Rui Galhano dos SantosRui Galhano dos Santos
Rui Galhano dos Santos
Eucalyptus globulus sawdust is a residue from the pulp and paper industry which has been underutilised and undervalued. The thermochemical liquefaction of sawdust can be considered an alternative for recycling this residue, as it results in the production of a bio-oil that, when extracted in water, allows the obtention of an aqueous solution composed of carbohydrates. The sugars resulting from the aqueous fraction of bio-oil can be valued by and applied in the industry to produce sustainable materials. For the first time, the sugar composition of the aqueous extract of bio-oil was disclosed, identified, and quantified by a high-pressure liquid chromatograph (HPLC) coupled to a refractive index (RID) detector containing fructose (36.58%) and glucose (33.33%) as the main components, sucrose (15.14%), trehalose (4.82%) and xylose (10.13%). The presence of these sugars was further confirmed by two-dimensional (2D) 1H-13C heteronuclear single-quantum correlation–nuclear magnetic resonance (HSQC–NMR) spectroscopy. Fourier-transform infrared (FTIR-ATR) and elemental analyses were also used. In addition, the pathway leading to the identified sugars is also suggested.