Biomass can be envisaged as a potential solution to mitigate the problems that the extensive exploitation of fossil sources causes on the environment. Transforming biomass into added-value products with better calorific properties is highly desired. Thermochemical liquefaction can convert biomass into a bio-oil. The work herein presented concerns the study of direct liquefaction of Eucalyptus globulus sawdust. The main goal was to optimise the operating conditions of the process to achieve high bio-oil conversion rates. Studies were carried out to understand the impact of the process factors, such as the residence time, catalyst concentration, temperature, and the biomass-to-solvent ratio. The E. globulus sawdust conversion into bio-oil was achieved with a maximum conversion of 96.2%. A higher conversion was reached when the eucalyptus sawdust’s thermochemical liquefaction was conducted over 180 min in the presence of a >2.44% catalyst concentration at 160 °C. A lower biomass-to-solvent ratio favours the process leading to a higher conversion of biomass into bio-oil. The afforded bio-oil presented a better higher heating value than that of E. globulus sawdust.

Liquefaction of biomass delivers a liquid bio-oil with relevant chemical and energetic applications. In this study we coupled it with short rotation coppice (SRC) intensively managed poplar cultivations aimed at biomass production while safeguarding environmental principles of soil quality and biodiversity. We carried out acid-catalyzed liquefaction, at 160 °C and atmospheric pressure, with eight poplar clones from SRC cultivations. The bio-oil yields were high, ranging between 70.7 and 81.5%. Average gains of bio-oil, by comparison of raw biomasses, in elementary carbon and hydrogen and high heating, were 25.6, 67, and 74%, respectively. Loss of oxygen and O/C ratios averaged 38 and 51%, respectively. Amounts of elementary carbon, oxygen, and hydrogen in bio-oil were 65, 26, and 8.7%, and HHV averaged 30.5 MJkg⁻¹. Correlation analysis showed the interrelation between elementary carbon with HHV in bio-oil or with oxygen loss. Overall, from 55 correlations, 21 significant and high correlations among a set of 11 variables were found. Among the most relevant ones, the percentage of elementary carbon presented five significant correlations with the percentage of O (−0.980), percentage of C gain (0.902), percentage of O loss (0.973), HHV gain (0.917), and O/C loss (0.943). The amount of carbon is directly correlated with the amount of oxygen, conversely, the decrease in oxygen content increases the elementary carbon and hydrogen concentration, which leads to an improvement in HHV. HHV gain showed a strong positive dependence on the percentage of C (0.917) and percentage of C gain (0.943), while the elementary oxygen (−0.885) and its percentage of O loss (0.978) adversely affect the HHV gain. Consequently, the O/C loss (0.970) increases the HHV positively. van Krevelen’s analysis indicated that bio-oils are chemically compatible with liquid fossil fuels. FTIR-ATR evidenced the presence of derivatives of depolymerization of lignin and cellulose in raw biomasses in bio-oil. TGA/DTG confirmed the bio-oil burning aptitude by the high average 53% mass loss of volatiles associated with lowered peaking decomposition temperatures by 100 °C than raw biomasses. Overall, this research shows the potential of bio-oil from liquefaction of SRC biomasses for the contribution of renewable energy and chemical deliverables, and thereby, to a greener global economy.

Eucalyptus globulus sawdust is a residue from the pulp and paper industry which has been underutilised and undervalued. The thermochemical liquefaction of sawdust can be considered an alternative for recycling this residue, as it results in the production of a bio-oil that, when extracted in water, allows the obtention of an aqueous solution composed of carbohydrates. The sugars resulting from the aqueous fraction of bio-oil can be valued by and applied in the industry to produce sustainable materials. For the first time, the sugar composition of the aqueous extract of bio-oil was disclosed, identified, and quantified by a high-pressure liquid chromatograph (HPLC) coupled to a refractive index (RID) detector containing fructose (36.58%) and glucose (33.33%) as the main components, sucrose (15.14%), trehalose (4.82%) and xylose (10.13%). The presence of these sugars was further confirmed by two-dimensional (2D) 1H-13C heteronuclear single-quantum correlation–nuclear magnetic resonance (HSQC–NMR) spectroscopy. Fourier-transform infrared (FTIR-ATR) and elemental analyses were also used. In addition, the pathway leading to the identified sugars is also suggested.

In the present study, a green and readily effective route is presented, using for the first time, methanesulfonic acid (MSA) as a catalyst to produce alkyl levulinates (ALs) via the addition of alcohols to α-angelica lactone (α-AL). A smooth procedure was developed that resulted in the production of high-purity ALs, with complete conversions and high yields (99.1–99.8%), within 20 to 60 min of reaction in the presence of 0.5 mol% MSA. The reactions were carried out solvent-free, at room temperature, and in atmospheric air. Reaction conditions were optimized, and equimolar amounts of alcohol reagent were used. This work presents the main advantages of the use of a catalyst (MSA) that is low cost, easily biodegradable, and does not release toxic gases into the environment, but has an acidic strength comparable to that of other mineral acids. Therefore, this study proves the remarkable efficiency of MSA as a catalyst in the synthesis of ALs through an economically and environmentally favorable route.