Diogo Gonçalves

Mr. Diogo Gonçalves

orcid

Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
24 November 2021 in Polymers
Verified
Journal Article
Open access
PDF file
DGDiogo Gonçalves
Diogo Gonçalves
JBJoão Carlos Moura Bordado
João Carlos Moura Bordado
Ana C. MarquesAna C. Marques
Ana C. Marques
Rui Galhano dos SantosRui Galhano dos Santos
Rui Galhano dos Santos
There is a strong need to develop and implement appropriate alternatives to replace formaldehyde-based adhesive systems, such as phenol–formaldehyde, in the industry of wood-based panels (WBPs). This is due to the toxicity and volatility of formaldehyde and restrictions on its use associated with some formaldehyde-based adhesives. Additionally, the current pressure to reduce the dependence on polymeric materials, including adhesives, from petrochemical-based sources has led to increased interest in bio-based adhesives, which, in some cases, already provide acceptable properties to the end-product. Among the potential raw materials for good-quality, renewable-based adhesive formulations, this paper highlights tannins, lignin, and protein sources. However, regarding renewable sources, specific features must be considered, such as their lower reactivity than certain petrochemical-based sources and, therefore, higher production costs, resource availability issues, and the need for toxicological investigations on alternative systems, to compare them to conventional systems. As a result, further research is highly encouraged to develop viable formaldehyde-free adhesive systems based on renewable sources, either at the technical or economical level. Moreover, herein, we also showcase the present market of WBPs, highlighting the obstacles that the alternative and new bio-based adhesives must overcome.

20 December 2022 in Polymers
Verified
Journal Article
Open access
PDF file
SASuzete Maria Almeida
Suzete Maria Almeida
SOSila Ozkan
Sila Ozkan
DGDiogo Gonçalves
Diogo Gonçalves
IPIvo Paulo
Ivo Paulo
CQCarla Queirós
Carla Queirós
Rui Galhano dos SantosRui Galhano dos Santos
Rui Galhano dos Santos
The circular economy plays an important role in the preparation and recycling of polymers. Research groups in different fields, such as materials science, pharmaceutical and engineering, have focused on building sustainable polymers to minimize the release of toxic products. Recent studies focused on the circular economy have suggested developing new polymeric materials based on renewable and sustainable sources, such as using biomass waste to obtain raw materials to prepare new functional bio-additives. This review presents some of the main characteristics of common polymer additives, such as antioxidants, antistatic agents and plasticizers, and recent research in developing bio-alternatives. Examples of these alternatives include the use of polysaccharides from agro-industrial waste streams that can be used as antioxidants, and chitosan which can be used as an antistatic agent.

26 November 2021 in Molecules
Verified
Journal Article
Open access
PDF file
DGDiogo Gonçalves
Diogo Gonçalves
Sofia Moreira FernandesSofia Moreira Fernandes
Sofia Moreira Fernandes
SMSandro Matos
Sandro Matos
HMHenrique Machado
Henrique Machado
SVSalomé Vieira
Salomé Vieira
Rui Galhano dos SantosRui Galhano dos Santos
Rui Galhano dos Santos
Biomass thermochemical liquefaction is a chemical process with multifunctional bio-oil as its main product. Under this process, the complex structure of lignocellulosic components can be hydrolysed into smaller molecules at atmospheric pressure. This work demonstrates that the liquefaction of burned pinewood from forest fires delivers similar conversion rates into bio-oil as non-burned wood does. The bio-oils from four burned biomass fractions (heartwood, sapwood, branches, and bark) showed lower moisture content and higher HHV (ranging between 32.96 and 35.85 MJ/kg) than the initial biomasses. The increased HHV resulted from the loss of oxygen, whereas the carbon and hydrogen mass fractions increased. The highest conversion of bark and heartwood was achieved after 60 min of liquefaction. Sapwood, pinewood, and branches reached a slightly higher conversion, with yields about 8% greater, but with longer liquefaction time resulting in higher energy consumption. Additionally, the van Krevelen diagram indicated that the produced bio-oils were closer and chemically more compatible (in terms of hydrogen and oxygen content) to the hydrocarbon fuels than the initial biomass counterparts. In addition, bio-oil from burned pinewood was shown to be a viable alternative biofuel for heavy industrial applications. Overall, biomass from forest fires can be used for the liquefaction process without compromising its efficiency and performance. By doing so, it recovers part of the lost value caused by wildfires, mitigating their negative effects.

4 January 2022 in Molecules
Verified
Journal Article
Open access
PDF file
IPIvo Paulo
Ivo Paulo
LCLuis Costa
Luis Costa
Abel RodriguesAbel Rodrigues
Abel Rodrigues
Sofia Moreira FernandesSofia Moreira Fernandes
Sofia Moreira Fernandes
SMSandro Matos
Sandro Matos
Rui Galhano dos SantosRui Galhano dos Santos
Rui Galhano dos Santos
Liquefaction of biomass delivers a liquid bio-oil with relevant chemical and energetic applications. In this study we coupled it with short rotation coppice (SRC) intensively managed poplar cultivations aimed at biomass production while safeguarding environmental principles of soil quality and biodiversity. We carried out acid-catalyzed liquefaction, at 160 °C and atmospheric pressure, with eight poplar clones from SRC cultivations. The bio-oil yields were high, ranging between 70.7 and 81.5%. Average gains of bio-oil, by comparison of raw biomasses, in elementary carbon and hydrogen and high heating, were 25.6, 67, and 74%, respectively. Loss of oxygen and O/C ratios averaged 38 and 51%, respectively. Amounts of elementary carbon, oxygen, and hydrogen in bio-oil were 65, 26, and 8.7%, and HHV averaged 30.5 MJkg−1. Correlation analysis showed the interrelation between elementary carbon with HHV in bio-oil or with oxygen loss. Overall, from 55 correlations, 21 significant and high correlations among a set of 11 variables were found. Among the most relevant ones, the percentage of elementary carbon presented five significant correlations with the percentage of O (−0.980), percentage of C gain (0.902), percentage of O loss (0.973), HHV gain (0.917), and O/C loss (0.943). The amount of carbon is directly correlated with the amount of oxygen, conversely, the decrease in oxygen content increases the elementary carbon and hydrogen concentration, which leads to an improvement in HHV. HHV gain showed a strong positive dependence on the percentage of C (0.917) and percentage of C gain (0.943), while the elementary oxygen (−0.885) and its percentage of O loss (0.978) adversely affect the HHV gain. Consequently, the O/C loss (0.970) increases the HHV positively. van Krevelen’s analysis indicated that bio-oils are chemically compatible with liquid fossil fuels. FTIR-ATR evidenced the presence of derivatives of depolymerization of lignin and cellulose in raw biomasses in bio-oil. TGA/DTG confirmed the bio-oil burning aptitude by the high average 53% mass loss of volatiles associated with lowered peaking decomposition temperatures by 100 °C than raw biomasses. Overall, this research shows the potential of bio-oil from liquefaction of SRC biomasses for the contribution of renewable energy and chemical deliverables, and thereby, to a greener global economy.

28 January 2023 in Polymers
Verified
Journal Article
Open access
PDF file
António AguiarAntónio Aguiar
António Aguiar
AMAntónio Mariquito
António Mariquito
DGDiogo Gonçalves
Diogo Gonçalves
IPIsabel Pinho
Isabel Pinho
Ana C. MarquesAna C. Marques
Ana C. Marques
Poly(butylene adipate-co-terephthalate) (PBAT), a biodegradable flexible, and tough polymer is herein used, for the first time, to encapsulate and protect isocyanate derivatives. Isocyanates are essential building blocks widely employed in the chemical industry for the production of high-performing materials. Microencapsulation of isocyanates eliminates the risks associated with their direct handling and protects them from moisture. In light of this, and having in mind eco-innovative products and sustainability, we present a straightforward process to encapsulate isophorone diisocyanate (IPDI) using this biodegradable polymer. Spherical and core-shell microcapsules (MCs) were produced by an emulsion system combined with the solvent evaporation method. The MCs present a regular surface, without holes or cracks, with a thin shell and high isocyanate loadings, up to 79 wt%. Additionally, the MCs showed very good isocyanate protection if not dispersed in organic or aqueous solutions. Effects of various process parameters were systematically studied, showing that a higher stirring speed (1000 rpm) and emulsifier amount (2.5 g), as well as a smaller PBAT amount (1.60 g), lead to smaller MCs and narrower size distribution.

30 September 2024 in Energies
Verified
Journal Article
Open access
PDF file
SOSila Ozkan
Sila Ozkan
HSHenrique Martins Sousa
Henrique Martins Sousa
DGDiogo Gonçalves
Diogo Gonçalves
JPJaime Filipe Borges Puna
Jaime Filipe Borges Puna
ACAna Carvalho
Ana Carvalho
Joao GomesJoao Gomes
Joao Gomes
This study is focused on the modelling of the production of bio-oil by thermochemical liquefaction. Species Acacia melanoxylon was used as the source of biomass, the standard chemical 2-Ethylhexanol (2-EHEX) was used as solvent, p-Toluenesulfonic acid (pTSA) was used as the catalyst, and acetone was used for the washing process. This procedure consisted of a moderate acid-catalysed liquefaction process and was applied at 3 different temperatures to determine the proper model: 100, 135, and 170 °C, and at 30-, 115-, and 200-min periods with 0.5%, 5.25%, and 10% (m/m) catalyst concentrations of overall mass. Optimized results showed a bio-oil yield of 83.29% and an HHV of 34.31 MJ/kg. A central composite face-centred (CCF) design was applied to the liquefaction reaction optimization. Reaction time, reaction temperature, as well as catalyst concentration, were chosen as independent variables. The resulting model exhibited very good results, with a highly adjusted R-squared (1.000). The liquefied products and biochar samples were characterized by Fourier-transformed infrared (FTIR) and thermogravimetric analysis (TGA); scanning electron microscopy (SEM) was also performed. The results show that invasive species such as acacia may have very good potential to generate biofuels and utilize lignocellulosic biomass in different ways. Additionally, using acacia as feedstock for bio-oil liquefaction will allow the valorisation of woody biomass and prevent forest fires as well. Besides, this process may provide a chance to control the invasive species in the forests, reduce the effect of forest fires, and produce bio-oil as a renewable energy.