Matteo Dalboni

Dr. Matteo Dalboni


Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
28 November 2022 in IEEE Transactions on Instrumentation and Measurement
Verified
Journal Article
Open access
MDMatteo Dalboni
Matteo Dalboni
Alessandro SoldatiAlessandro Soldati
Alessandro Soldati
Driving synchronous machines requires early and accurate knowledge of the absolute position of the rotor; current solutions based on resolvers, sin-cos or absolute encoders are complex, bulky and costly. Hence, in this work two variants of absolute rotary encoder based on Vernier method are analyzed. One, already discussed in the literature, displays the Vernier scale across the whole circumference (full-Vernier), the other shows half Vernier traces over the entire perimeter (half-Vernier), which is an original feature. Both implementations are characterized by only two tracks and as many sensors: the proposed conditioning algorithms provide the absolute angular position as a function of the time delays between the wave edges generated by the two traces, thus being of easy implementation on low-cost MCUs. The Vernier encoders are also compared with state-of-the-art absolute and relative solutions, i.e. incremental, binary and Gray-code encoders. Experimental tests are carried out to assess the accuracy of the proposed sensors. The investigation shows that (i) the full-Vernier cannot provide, in practice, a reliable estimate of the direction of rotation and of the actual angular sector without resorting to a third sensor; (ii) the half-Vernier produces a trusty measurement of the absolute angle and velocity and (iii) can give a reliable position result with less than 30° shaft turn, but (iv) it can suffer from marginal performance degradation at low velocities in conjunction with high accelerations. Compared to the Gray encoder, the half-Vernier provides a simpler and more compact hardware for a given resolution, similar to that of an incremental encoder, at the expense of a small accuracy reduction at low speed.

18 March 2024 in IEEE Transactions on Vehicular Technology
Verified
Journal Article
Open access
MDMatteo Dalboni
Matteo Dalboni
GMGil Martins
Gil Martins
Davide TaverniniDavide Tavernini
Davide Tavernini
Umberto MontanaroUmberto Montanaro
Umberto Montanaro
Alessandro SoldatiAlessandro Soldati
Alessandro Soldati
Aldo SorniottiAldo Sorniotti
Aldo Sorniotti
The literature shows increasing interest in the energy efficiency aspects of electric vehicles with multiple actuators, e.g., capable of individual wheel torque and rear-wheel-steering control, and proposes controllers considering the relevant vehicle power losses. However, the available studies lack systematic analyses on: i) the energy saving potential of the individual actuation methods, and their combinations; and ii) the operating conditions in which a set of actuators is particularly effective in reducing power consumption. This paper targets the identified gap. After providing background on the relevant power losses, three forms of actuation, i.e., torque-vectoring through two or four electric powertrains, active suspensions for front-to-total anti-roll moment distribution control, and rear-wheel-steering, are explored through a set of simulations in quasi-steady-state conditions, by using an experimentally validated high-fidelity non-linear vehicle model. The analysis covers a range of vehicle speeds, longitudinal and lateral accelerations, and tire-road friction conditions, and determines: a) the most energy-efficient understeer characteristics, i.e., the loci of the front steering angle as a function of lateral acceleration providing the minimum power consumption, for each set of actuators; b) the energy-efficient actuations for achieving given understeer characteristics; and c) the power consumption penalty of each considered configuration with respect to the one with the complete set of actuators.

14 January 2024 in Vehicle System Dynamics
Verified
Journal Article
Open access
NAN. H. Amer
N. H. Amer
MDMatteo Dalboni
Matteo Dalboni
PGP. Georgiev
P. Georgiev
CCC. Caponio
C. Caponio
DTD. Tavernini
D. Tavernini
Aldo SorniottiAldo Sorniotti
Aldo Sorniotti

10 November 2021 in Electronics
Verified
Journal Article
Open access
PDF file
Alessandro SoldatiAlessandro Soldati
Alessandro Soldati
MDMatteo Dalboni
Matteo Dalboni
RMRoberto Menozzi
Roberto Menozzi
Carlo ConcariCarlo Concari
Carlo Concari
The on-state voltage of MOSFETs is a convenient and powerful temperature-sensitive electric parameter (TSEP) to determine the junction temperature, thus enabling device monitoring, protection, diagnostics and prognostics. The main hurdle in the use of the on-state voltage as a TSEP is the per-device characterization procedure, to be carried out in a controlled environment, with high costs. In this paper, we compare two novel techniques for MOSFET junction temperature estimation: controlled shoot-through and direct heating by resistive heaters embedded in two Kapton (polyimide) films. Both allow in-place characterization of the TSEP curve with the device mounted in its final circuit and assembly, including the working heat sink. The two methods are also validated against the conventional procedure in a thermal chamber.

2 August 2024 in IEEE Open Journal of Power Electronics
Verified
Journal Article
Open access
MDMatteo Dalboni
Matteo Dalboni
Alessandro SoldatiAlessandro Soldati
Alessandro Soldati
This study addresses the design of a distributed controller, mostly intended for modular applications where parallel-connected voltage-source converters (VSCs) operate loads in conditions of current continuity. The only requirement is that the modules are based on half-bridge architectures, possibly synchronous, such as buck, boost, half-bridge, full-bridge and three-phase bridges. The proposed controller can work with small (few microhenries) series inductors, mostly comparable with the stray inductance already existing in the wiring. Each regulator adjusts the pulse-width modulation (PWM) of a given converter based only on its own output current. Each PWM pattern is shifted on the nanosecond time scale using a peculiarly inexpensive software modulator. The overall control action allows achieving the synchronous operation of all converters at modulation frequency, thus suppressing the circulating current. The control strategy is mathematically designed through novel models, and experimentally validated employing three DC-DC converters. The study demonstrates (i) the feasibility and robustness of the method to compensate for both phase and frequency errors among the units, (ii) the capability of the controller to cope with the inherent parameter mismatch among the modules, and (iii) its ability to operate in tandem with a load balancing regulator

20 July 2023 in IEEE/ASME Transactions on Mechatronics
Verified
Journal Article
Open access
MDMatteo Dalboni
Matteo Dalboni
Alessandro SoldatiAlessandro Soldati
Alessandro Soldati
There exist some modular mechanical systems that exhibit inherent synchronization capabilities. Among these, arrays of pendula connected to the same moving platform, under some particular conditions that are analyzed in this work, tend to approach the synchronous in-phase or antiphase motion. Such an appealing behavior can be replicated within modular electronic circuits equipped with multiple power converters to achieve the coordination of all units. The approach consists in recasting the mechanical equations of motion of interconnected pendula to the equivalent electrical circuit by impedance or mobility analogy. This allows obtaining a self-synchronizing network without the need of explicit communication between the modules. The effectiveness of the proposed distributed controller is assessed through experimental tests. Therefore, the fundamental points of novelty are the derivation of two (series and parallel) self-synchronizing electrical linear circuits through analogy with mechanical models and the introduction of a distributed voltage-source controller for parallel operation of converters based on a fully linear model. The proposed methodology is effective for both parallel-output converters with independent inputs (as in microgrid applications) and parallel-input and parallel-output converters (as in high-current applications).