Connected autonomous vehicles are considered as mitigators of issues such as traffic congestion, road safety, inefficient fuel consumption and pollutant emissions that current road transportation system suffers from. Connected autonomous vehicles utilise communication systems to enhance the performance of autonomous vehicles and consequently improve transportation by enabling cooperative functionalities, namely, cooperative sensing and cooperative manoeuvring. The former refers to the ability to share and fuse information gathered from vehicle sensors and road infrastructures to create a better understanding of the surrounding environment while the latter enables groups of vehicles to drive in a co-ordinated way which ultimately results in a safer and more efficient driving environment. However, there is a gap in understanding how and to what extent connectivity can contribute to improving the efficiency, safety and performance of autonomous vehicles. Therefore, the aim of this paper is to investigate the potential benefits that can be achieved from connected autonomous vehicles through analysing five use-cases: (i) vehicle platooning, (ii) lane changing, (iii) intersection management, (iv) energy management and (v) road friction estimation. The current paper highlights that although connectivity can enhance the performance of autonomous vehicles and contribute to the improvement of current transportation system performance, the level of achievable benefits depends on factors such as the penetration rate of connected vehicles, traffic scenarios and the way of augmenting off-board information into vehicle control systems.

This study applies nonlinear model predictive control (NMPC) to the torque-vectoring (TV) and front-to-total anti-roll moment distribution control of a four-wheel-drive electric vehicle with in-wheel-motors, a brake-by-wire system, and active suspension actuators. The NMPC cost function formulation is based on energy efficiency criteria, and strives to minimize the power losses caused by the longitudinal and lateral tire slips, friction brakes, and electric powertrains, while enhancing the vehicle cornering response in steady-state and transient conditions. The controller is assessed through simulations using an experimentally validated high-fidelity vehicle model, along ramp steer and multiple step steer maneuvers, including and excluding the direct yaw moment and active anti-roll moment distribution actuations. The results show: 1) the substantial enhancement of energy saving and vehicle stabilization performance brought by the integration of the active suspension contribution and TV; 2) the significance of the power loss terms of the NMPC formulation on the results; and 3) the effectiveness of the NMPC with respect to the benchmarking feedback and rule based controllers.

This paper presents the design of a robust distributed state-feedback controller in the discrete-time domain for homogeneous vehicle platoons with undirected topologies, whose dynamics are subjected to external disturbances and under random single packet drop scenario. A linear matrix inequality (LMI) approach is used for devising the control gains such that a bounded H∞ norm is guaranteed. Furthermore, a lower bound of the robustness measure, denoted as ɣ gain, is derived analytically for two platoon communication topologies, i.e., the bidirectional predecessor following (BPF) and the bidirectional predecessor leader following (BPLF). It is shown that the ɣ gain is highly affected by the communication topology and drastically reduces when the information of the leader is sent to all followers. Finally, numerical results demonstrate the ability of the proposed methodology to impose the platoon control objective for the BPF and BPLF topology under random single packet drop.

The introduction of active safety systems and advanced driver assistance systems has enhanced the control authority over the vehicle dynamics through specialized actuators, enabling, for instance, independent wheel torque control. During emergency situations, these systems step in to aid the driver by limiting vehicle response to a stable and controllable range of low longitudinal tire slips and slip angles. This approach makes vehicle behavior predictable and manageable for the average human driver; however, it is conservative in case of driving automation. In fact, past research has shown that exceeding the operational boundaries of conventional active safety systems enables trajectories that are otherwise unattainable. This paper presents a nonlinear model predictive controller (NMPC) for path tracking (PT), which integrates steering, front-to-total longitudinal tire force distribution, and direct yaw moment actuation, and can operate beyond the limit of handling, e.g., to induce drift, if this is beneficial to PT. Simulation results of emergency conditions in an intersection scenario highlight that the proposed solution provides significant safety improvements, when compared to the concurrent operation of PT algorithms and the current generation of vehicle stability controllers.