The influence of Acrylate Styrene Acrylonitrile (ASA) and ASA/nanosilica (ASA/Si) additives was investigated by using a dynamic shear rheometer (DSR). Firstly, an ASA polymer was blended with the virgin asphalt binder at two different concentrations (3% ASA and 5% ASA). After observing that 5% ASA was the optimum concentration for modification, nanosilica particles were further incorporated into the 5% ASA-modified asphalt binder with two different percentages (5% ASA 3%Si; 5% ASA 5%Si). Frequency sweep tests were conducted across various frequencies at elevated temperatures. The experimental outcomes were analyzed using master curves, rutting, and fatigue resistance parameter plots. Additionally, to provide a more holistic analysis, two different multicriteria decision analysis (MCDA) techniques, namely the Preference Ranking Organization Method for Enrichment Evaluations (PROMETHEE) and the Technique for the Order of Preference by a Similarity to Ideal Solution (TOPSIS), were conducted to identify the best-performing asphalt binder by considering three different parameters: workability, performance under different conditions, and cost. The frequency sweep tests showed that the 5% ASA 5%Si asphalt worked best in terms of resistance to rutting. On the other hand, the virgin binder performed better than all modified binders when it failed to resist fatigue. On the other hand, the PROMETHEE analysis identified the 5% ASA-modified asphalt binder as the optimal choice, while the TOPSIS analysis determined that the 5% ASA 3%Si-modified binder provided the best performance. The differences between the experimental results and the MCDA were due to using more than one evaluation parameter and looking at how well the asphalt binder worked at different temperature ranges at the same time.
11 June 2026 in Innovative Infrastructure Solutions
Asphalt pavement performance is based on several parameters and properties of the materials’ element. surface free energy that the modifier and the asphalt binder both displays. The resistance of the modified asphalt binder to stresses and moisture damage is largely determined by the bond energies. Asphalt binder qualities may be altered by either technical or natural processes, which subsequently impact on the chemical and mechanical characteristics. In addition, a correlated investigation revealed that surface free energy values may be used to assess the compatibility of a binder in relation to moisture-induced damage. Data demonstrates that the incorporation of soft clay into the asphalt binder resulted in a favorable coating and bonding capacity, as compared to the control asphalt binder. moisture-induced damage in HMA is a combined effect of loss of cohesion of asphalt binder and loss of adhesion between asphalt binder and aggregate. It was indicated that the modified binders of BPSC ratios would delay and weaken the oxidation reaction asphalt binder which can enhance the aging process. Based on absorbance peaks of carbonyl and sulfoxide bonds, the addition of BPSC would delay the aging process of asphalt binder.
31 December 2023 in Tobruk University Journal of Engineering Sciences
Through the utilization of waste materials in asphalt pavement, such as plastic water bottles made of Polyethylene Terephthalate (RPET), it is possible to explore alternative solutions that can enhance the service life of asphalt pavement while simultaneously reducing environmental pollution. This research specifically investigates the viability of incorporating waste plastic bottles, made of RPET, as polymer additives in asphalt binder to address common pavement issues. three different proportions of RPET (3%, 5%, and 7%) were added by weight of optimum binder to prepare the specimens. Various tests were conducted, including the physical properties and viscosity. The findings revealed that the optimal modifier content was 5% for the RPET-modified asphalt binder. This composition demonstrated maximum stability. It is observed that the addition of RPET to the asphalt binder resulted in a reduction in penetration values and an increase in softening points. Furthermore, it exhibited improved resistance against permanent deformations and superior engineering properties. This research contributes to the field of modified binder, and waste plastic, specifically Polyethylene Terephthalate (RPET), by providing valuable insights and highlighting the potential benefits of utilizing such materials in pavement construction.
The establishment of strong interlayer bonding between the base course and asphalt surface is critical for the durability of flexible pavements. Inadequate adhesion at this junction commonly causes slippage, fissures, and early deterioration, consequently diminishing pavement longevity and escalating maintenance expenses. Conventional prime coats, such as cutback and emulsified asphalts, possess drawbacks, including ecological issues and variable efficacy in adverse site conditions. This study investigates the Prime Coal Fly Ash Coat (PCFAC), which is developed utilizing Coal Fly Ash (CFA), an abundant industrial by-product, as an eco-friendly substitute for prime coats. Experimental work involved preparing granular base layers in accordance with laboratory specifications, followed by the application of PCFAC mixtures at different CFA-to-water ratios and distribution rates. Specimens were cured under laboratory conditions for 24 hours following base preparation and an additional 24 hours subsequent to PCFAC application before testing. Findings indicated that higher CFA content enhanced mixture stability and adhesion, with PCFAC-2.5 demonstrating optimal performance. The optimum distribution rate of 1.75 kg/m² was determined by comparing penetration depth, pull-off strength, and direct shear strength, balancing sufficient infiltration with strong adhesion and effective workability. At this rate, the PCFAC attained a pull-off tensile strength of 322 kPa and a direct shear strength of 3.5 MPa, signifying the highest values among the investigated PCFAC formulations. The findings highlight PCFAC’s capability to enhance interlayer bonding while valorizing industrial waste, thereby contributing to sustainable pavement practices. The manuscript further examines the limitations of the study, such as the adaptation of current testing standards, and proposes recommendations for further research and field validation.
24 August 2026 in University of Zawia Journal of Engineering Sciences and Technology
Road accidents worldwide are increasing, and the same problems are happening in Libya. Over the years, along the Bani Walid–Tripoli highway, the number of fatal crashes and related deaths has gradually increased. This research aims to evaluate infrastructural, behavioural, and socio-demographic factors associated with road accidents on this important route. Quantitative data were also analysed using SPSS Version 29. This work explores that 91% of respondents supported unsafe driving practices, while only 9% rejected them. In conclusion, this study contributes to improving road traffic accidents on the Bani Walid–Tripoli highway are mainly linked to reckless driving and poor road conditions. It is recommended that stronger radar-based speed enforcement, urgent road maintenance, and structured road-safety education programmes are needed to decrease accidents and protect road users.