Josephine Zeisig

Dr. Josephine Zeisig

orcid

Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
26 February 2023 in Materials
Verified
Journal Article
Open access
PDF file
JZJosephine Zeisig
Josephine Zeisig
Viktoriia ShtefanViktoriia Shtefan
Viktoriia Shtefan
LGLars Giebeler
Lars Giebeler
UKUta Kühn
Uta Kühn
GAGebert Annett
Gebert Annett
JHJulia Kristin Hufenbach
Julia Kristin Hufenbach
In this study, a newly developed high-strength cast Fe81Cr15V3C1 (wt%) steel with a high resistance against dry abrasion and chloride-induced pitting corrosion is presented. The alloy was synthesized through a special casting process that yielded high solidification rates. The resulting fine, multiphase microstructure is composed of martensite, retained austenite and a network of complex carbides. This led to a very high compressive strength (>3800 MPa) and tensile strength (>1200 MPa) in the as-cast state. Furthermore, a significantly higher abrasive wear resistance in comparison to the conventional X90CrMoV18 tool steel was determined for the novel alloy under very harsh wear conditions (SiC, α-Al2O3). Regarding the tooling application, corrosion tests were conducted in a 3.5 wt.% NaCl solution. Potentiodynamic polarization curves demonstrated a similar behavior during the long-term testing of Fe81Cr15V3C1 and the X90CrMoV18 reference tool steel, though both steels revealed a different nature of corrosion degradation. The novel steel is less susceptible to local degradation, especially pitting, due to the formation of several phases that led to the development of a less dangerous form of destruction: galvanic corrosion. In conclusion, this novel cast steel offers a cost- and resource-efficient alternative to conventionally wrought cold-work steels, which are usually required for high-performance tools under highly abrasive as well as corrosive conditions.

30 April 2024 in Corrosion Science
Verified
Journal Article
Open access
VSViktoriia Shtefan
Viktoriia Shtefan
GAGebert Annett
Gebert Annett
MHMartin Hantusch
Martin Hantusch
KNKai Neufeld
Kai Neufeld
JZJosephine Zeisig
Josephine Zeisig
JHJulia Kristin Hufenbach
Julia Kristin Hufenbach

12 November 2021 in Metals
Verified
Journal Article
Open access
PDF file
JKJonas Kimme
Jonas Kimme
JZJosephine Zeisig
Josephine Zeisig
AFAlexander Fröhlich
Alexander Fröhlich
VKVerena Kräusel
Verena Kräusel
This paper presents the development and successful application of an inductive preheating system running simultaneously with the manual laser cladding process in order to enable the repair of high-alloy tool steels having a highly limited weldability. In this study, the design and optimization of a suitable inductor as well as the analysis of the welding process were carried out by means of FE-simulation in order to generate material deposition without imperfections. Parameter variation studies were conducted while parallel modifying the generator power resulting in different preheating temperatures. These examinations showed that by using appropriate process parameters and an inductive preheating temperature of 200 °C, crack- and pore-free deposition layers could be produced on the commercial high-alloyed PM steel Elmax. This result can be explained by FE-simulation demonstrating that the cooling rate was halved in the weld and in the heat-affected zone. In conclusion, this study shows the high potential of the developed technical innovation for the manual laser cladding of high-performance tools.