Gayathri Pillai

Prof. Gayathri Pillai


Research Focus & Metrics

Academic Career Length

5Years (2022-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
21 November 2024 in IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control
Verified
Journal Article
Closed access
ZLZhi-Qiang Lee
Zhi-Qiang Lee
JRJyothish Raj
Jyothish Raj
KSKongbrailatpam Sandeep Sharma
Kongbrailatpam Sandeep Sharma
GPGayathri Pillai
Gayathri Pillai
MLMing-Huang Li
Ming-Huang Li
This paper reports a cryogenic study on wideband shear horizontal surface acoustic wave (SH-SAW) devices based on an emerging Y-cut LiNbO 3 /SiO 2 /Sapphire (LNOS) platform. To perform a comprehensive study, low-loss acoustic delay lines (ADLs) equipped with unidirectional transducers were designed with a wavelength (λ) of 4 μm (900 MHz) and a wide fractional bandwidth (FBW) of around 7%, featuring various physical delays ranging from 5λ to 200λ as testing structures. By cooling the temperature down to 5 K, the insertion loss (IL) of the longest ADL and the extracted propagation loss (PL) were characterized as 4.1 dB and 3.5 dB/mm, respectively. Compared with an IL of 5.78 dB and a PL of 4.37 dB/mm at 275 K, the temperature-dependent acoustic losses diminish at low temperatures, with the overall PL dominated by the acoustic waveguide formed by the acoustic velocity mismatch between layers. Furthermore, a one-port resonator (λ = 2.8 μm) with a large perceived effective electromechanical coupling greater than 40% was also characterized using the same technique, showing a 2X boost in the maximum Bode-Q at cryogenic temperatures. This study not only characterized the acoustic properties of wideband LNOS SH-SAW devices but also validated their excellent performance across a wide temperature range, suggesting their potential applications in cryogenic phononic circuits.

8 May 2025 in Scientific Reports
Verified
Journal Article
Open access
PDF file
PKPraveen Kumar
Praveen Kumar
LCL. N. Chandrashekar
L. N. Chandrashekar
AJAntony Jeyaseelan
Antony Jeyaseelan
GPGayathri Pillai
Gayathri Pillai
Phononic frequency combs are the mechanical counterparts of optical frequency combs, representing a pivotal progression in nonlinear studies of micro-electromechanical systems. This work presents the generation of tunable frequency combs based on three-mode interaction through combination internal resonance and a ferroelectric thin film in curved piezoelectric micromachined ultrasonic transducer. The experimental results demonstrate rich three-mode coupled nonlinear dynamics and how this coupling leads to frequency comb generation under specific input actuation parameters. The comb spacing and the number of spectral lines can be tuned by modulating the applied DC voltage, as well as the AC input voltage and frequency. Unlike previous studies on three-mode comb analysis, a theoretical model is systematically developed using nonlinear von Kármán plate theory to elucidate the experimentally observed dynamics of nonlinear three-mode intermodal coupling through combination internal resonance and its role in comb generation. Our findings demonstrate resonance coupling between the first and third asymmetric modes and the second symmetric modes, underscoring the generation of tunable multimode phononic frequency combs. This advancement paves the way for further progress in nonlinear phononics, enabling diverse applications in sensors, acoustic imaging, and phonon computation.

19 October 2023 in IEEE Sensors Letters
Verified
Journal Article
Closed access
PKPraveen Kumar
Praveen Kumar
SDSahana D.
Sahana D.
CNChandrashekar L. N.
Chandrashekar L. N.
AJAntony Jeyaseelan
Antony Jeyaseelan
MNM. M. Nayak
M. M. Nayak
GPGayathri Pillai
Gayathri Pillai
In this letter, we report an ultrasensitive pressure sensor based on an integrated circular piezoelectric microelectromechanical resonator and stainless-steel diaphragm structure. Finite element analysis is conducted to validate the working principle of the sensor, identify modes with high-pressure sensitivity and estimate the resonance frequency drift. The sensor operates on the principle of frequency shift caused by the coupling between the applied pressure and stress of the resonator. The high electromechanical coupling coefficient of Lead Zirconate Titanate facilitates seamless transduction between the physical domains of interest. The sensitivity of the sensor is 31, 711 ppm/bar and 14, 600 ppm/bar for the first and second flexural modes with nonlinearity of 2.2% full-scale (FS) and 0.84%FS, respectively, in the operating range of 0-5 bar at room temperature. The sensor exhibits excellent repeatability for multiple bidirectional pressure sweep. The proof of concept demonstrated in this letter will enable miniaturization and batch fabrication of pressure sensors with high sensitivity and bandwidth of operation.

13 July 2022 in Journal of Micromechanics and Microengineering
Verified
Journal Article
Closed access
KSKongbrailatpam Sandeep Sharma
Kongbrailatpam Sandeep Sharma
HJHsin-Tung Jen
Hsin-Tung Jen
SLSheng-Shian Li
Sheng-Shian Li
GPGayathri Pillai
Gayathri Pillai
This work reports the successful excitation of a novel bulk acoustic mode whose actuation and sensing are facilitated by the support transducer topology (STT). The design methodology concurrently supports low motional impedance and high energy confinement features which are crucial for frequency reference components in Radio Frequency communication. A conventional bulk mode operating in the width extension (WE) mode is deployed to efficiently excite the higher-order radial mode using the STT design feature of resonant frequency matching. The thin-film piezoelectric on substrate support transducers excited in a WE mode is mechanically coupled to the bulk silicon allowing the acoustic energy of the MEMS resonator to be stored maximally in the high-quality factor ( Q ) resonant tank, thereby alleviating the overall losses due to low- Q of the piezoelectric thin film and electrode material. The resonator exhibits a Q of 19 728 at 63.56 MHz resonant frequency with a motional resistance ( R m ) of 368 Ω when measured in vacuum at a power level of 0 dBm. Under cryogenic measurement conditions, the device recorded a Q of 24 153 at 15 K. A standalone WE resonator is studied to put a spotlight on the quality factor enhancement technique using the STT. The STT enabled novel bulk mode enhances the overall Q by 320% and halves the R m . When implemented as an oscillator, its performance exceeds the Global System for Mobile communication standards phase noise (PN) requirements. PN of −136.95 dBc Hz −1 and −161.52 dBc Hz −1 at 1 kHz and 1 MHz offset, respectively, were recorded when normalized to a carrier frequency of 13 MHz.

4 October 2024 in Journal of Microelectromechanical Systems
Verified
Journal Article
Closed access
VKVishnu Kumar
Vishnu Kumar
STSudhanshu Tiwari
Sudhanshu Tiwari
GPGayathri Pillai
Gayathri Pillai
RPRudra Pratap
Rudra Pratap
SCSaurabh A. Chandorkar
Saurabh A. Chandorkar
Piezoelectric microelectromechanical systems have significant market potential owing to their superior capabilities of transduction to those of standard capacitive and piezoresistive devices. However, piezoelectric films are often lossy, which reduces the Quality Factor of devices and affects their performance. It is thus important to examine all sources of energy dissipation in such devices and accurately determine them based on experimental data. Currently used methods to quantify energy dissipation from different sources and the properties of materials based on experimental data are set-up for piezoelectric devices, in which energy storage and dissipation primarily occur in the same piezoelectric material. Moreover, such methods rely on resonance-antiresonance measurements, and thus are unsuitable for thin-film-piezoelectric-on-substrate (TPoS) Micro/Nano devices that have i) a significant portion of energy stored in the substrate/device layer, ii) a low signal-to-noise ratio owing to either lossy piezoelectric films or high motional impedance, or iii) a larger feedthrough capacitance, arising primarily from collocated electrodes, in addition to the internal capacitance of the piezoelectric film. In this paper, we propose a method that overcomes these challenges based on synchronized optical and electrical measurements. We develop a comprehensive physics-based model to extract all the relevant parameters for the device, including the coefficient of piezoelectric coupling, internal and feedthrough capacitance, loss tangents (dielectric, piezoelectric, and mechanical), and the contributions of different sources to the Quality Factor of the device. We showcase the proposed method by using a PZT-based TPoS MEMS cantilever and a Piezoelectric Micromachined Ultrasonic Transducers (PMUT). 2024-0063

1 January 2026 in ACS Applied Electronic Materials
Verified
Journal Article
Closed access
AJAntony Jeyaseelan
Antony Jeyaseelan
NJN. Javed
N. Javed
VSVijayendra Shastri
Vijayendra Shastri
SPShubham Kumar Parate
Shubham Kumar Parate
GPGayathri Pillai
Gayathri Pillai
RPRudra Pratap
Rudra Pratap