Kongbrailatpam Sandeep Sharma

Kongbrailatpam Sandeep Sharma

Auto-generated profile, based on publicly available information

Kongbrailatpam Sandeep Sharma

Center for Nano Science and Engineering, Indian Institute of Science at Bengaluru, Bengaluru, India

Research Focus & Metrics

Academic Career Length

11Years (2016-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
3 July 2017 in Applied Physics Letters
Verified
Journal Article
Closed access
KSKongbrailatpam Sandeep
Kongbrailatpam Sandeep
JGJ. Pundareekam Goud
J. Pundareekam Goud
KRK. C. James Raju
K. C. James Raju
This letter reports the use of the resonant spectrum method to characterize a high overtone bulk acoustic wave resonator (HBAR) which has a thin film ferroelectric BaSrTiO3 (BSTO) active layer on a YAG substrate. The HBAR works on the principle of electric field induced piezoelectricity of the thin film ferroelectric BSTO and exhibits switching functionality. From the parallel and series resonant frequencies of each of the multiple peaks in the frequency spectrum of the HBAR, the distribution of spacing of parallel resonance frequency and the distribution of effective coupling coefficient are studied and parameters like acoustic wave velocity, electromechanical coupling coefficient, elastic constant, and density for the thin film are determined. The influence of dc bias voltages on the distribution of the effective coupling coefficient and the electromechanical coupling coefficient is also reported. This letter also establishes the relationship between the relative tunability of the device capacitance and the electromechanical coupling coefficient.

21 November 2024 in IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control
Verified
Journal Article
Closed access
ZLZhi-Qiang Lee
Zhi-Qiang Lee
JRJyothish Raj
Jyothish Raj
KSKongbrailatpam Sandeep Sharma
Kongbrailatpam Sandeep Sharma
GPGayathri Pillai
Gayathri Pillai
MLMing-Huang Li
Ming-Huang Li
This paper reports a cryogenic study on wideband shear horizontal surface acoustic wave (SH-SAW) devices based on an emerging Y-cut LiNbO 3 /SiO 2 /Sapphire (LNOS) platform. To perform a comprehensive study, low-loss acoustic delay lines (ADLs) equipped with unidirectional transducers were designed with a wavelength (λ) of 4 μm (900 MHz) and a wide fractional bandwidth (FBW) of around 7%, featuring various physical delays ranging from 5λ to 200λ as testing structures. By cooling the temperature down to 5 K, the insertion loss (IL) of the longest ADL and the extracted propagation loss (PL) were characterized as 4.1 dB and 3.5 dB/mm, respectively. Compared with an IL of 5.78 dB and a PL of 4.37 dB/mm at 275 K, the temperature-dependent acoustic losses diminish at low temperatures, with the overall PL dominated by the acoustic waveguide formed by the acoustic velocity mismatch between layers. Furthermore, a one-port resonator (λ = 2.8 μm) with a large perceived effective electromechanical coupling greater than 40% was also characterized using the same technique, showing a 2X boost in the maximum Bode-Q at cryogenic temperatures. This study not only characterized the acoustic properties of wideband LNOS SH-SAW devices but also validated their excellent performance across a wide temperature range, suggesting their potential applications in cryogenic phononic circuits.

21 September 2020 in IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control
Verified
Journal Article
Closed access
SKSandeep Sharma Kongbrailatpam
Sandeep Sharma Kongbrailatpam
JGJ. Pundareekam Goud
J. Pundareekam Goud
KRK. C. James Raju
K. C. James Raju
This paper describes the characterization and analysis of the effects an additional polymer layer has on a high overtone bulk acoustic wave resonator based on Ba0.5Sr0.5TiO3 (BSTO) thin film by studying its spectral information. From both simulations (numerical model) and experimental results of the resonator with and without coating, significant difference of both cases is evident in the spacing of the parallel resonance frequencies (SPRF), effective coupling coefficient (k2eff), and Quality factor distribution of the resonator. The acoustic velocity of the coated material (SU-8) was calculated from the new periodicity introduced in the SPRF distribution. The SPRF of the SU-8 coated resonator decreases overall as expected due to the additional layer introduced but increases sharply in regions defined by the thickness and acoustic velocity of the SU-8 layer. The mechanical loss of the added layer has significant effect on the parameters of the resonator. The study reveals that this method of characterization can be used to approximate the mechanical loss of materials such as polymers or polymer composites. Simulation with finite element method agrees with the experimental result.

13 July 2022 in Journal of Micromechanics and Microengineering
Verified
Journal Article
Closed access
KSKongbrailatpam Sandeep Sharma
Kongbrailatpam Sandeep Sharma
HJHsin-Tung Jen
Hsin-Tung Jen
SLSheng-Shian Li
Sheng-Shian Li
GPGayathri Pillai
Gayathri Pillai
This work reports the successful excitation of a novel bulk acoustic mode whose actuation and sensing are facilitated by the support transducer topology (STT). The design methodology concurrently supports low motional impedance and high energy confinement features which are crucial for frequency reference components in Radio Frequency communication. A conventional bulk mode operating in the width extension (WE) mode is deployed to efficiently excite the higher-order radial mode using the STT design feature of resonant frequency matching. The thin-film piezoelectric on substrate support transducers excited in a WE mode is mechanically coupled to the bulk silicon allowing the acoustic energy of the MEMS resonator to be stored maximally in the high-quality factor ( Q ) resonant tank, thereby alleviating the overall losses due to low- Q of the piezoelectric thin film and electrode material. The resonator exhibits a Q of 19 728 at 63.56 MHz resonant frequency with a motional resistance ( R m ) of 368 Ω when measured in vacuum at a power level of 0 dBm. Under cryogenic measurement conditions, the device recorded a Q of 24 153 at 15 K. A standalone WE resonator is studied to put a spotlight on the quality factor enhancement technique using the STT. The STT enabled novel bulk mode enhances the overall Q by 320% and halves the R m . When implemented as an oscillator, its performance exceeds the Global System for Mobile communication standards phase noise (PN) requirements. PN of −136.95 dBc Hz −1 and −161.52 dBc Hz −1 at 1 kHz and 1 MHz offset, respectively, were recorded when normalized to a carrier frequency of 13 MHz.

15 September 2021 in IEEE Microwave and Wireless Components Letters
Verified
Journal Article
Closed access
SNSurajit Kumar Nath
Surajit Kumar Nath
JGJ. Pundareekam Goud
J. Pundareekam Goud
SKSandeep Sharma Kongbrailatpam
Sandeep Sharma Kongbrailatpam
GRGuruswamy Rajaram
Guruswamy Rajaram
KRK. C. James Raju
K. C. James Raju
A ferroelectric metal insulator metal (MIM) varactor structure incorporating a floating metal and coplanar waveguide (CPW) has been introduced here. The work of the proposed varactor is based on the field-dependent material properties of (Ba, Sr) TiO 3 (BST) thin film. A capacitance tunability of 44% has been achieved for the bias voltage of 0–10 V over a frequency range of 1–3 GHz. The proposed varactor structure yields a compact area, high capacitance density, and reduced mask process (two masks).

29 September 2016
Verified
Conference Paper
Closed access
KSK. Sandeep
K. Sandeep
JGJ. Pundareekam Goud
J. Pundareekam Goud
KRK. C James Raju
K. C James Raju
DC bias field dependent high overtone resonances are observed in a metal insulator metal (MIM) structure based on Ba0.5Sr0.5TiO3 (BST) thin films on a sapphire substrate. The microwave measurement shows the bias dependent nature of the device, wherein without any bias it acts like a MIM capacitor but upon biasing resonant peaks start appearing in its frequency spectra, which is typical of a response given by a high overtone bulk acoustic wave resonator (HBAR). Acoustic velocity of the sapphire substrate is calculated to be 11440 m/s and the HBAR exhibits a high quality factor of 4370 around 1.39 GHz.