Azran Mohd Zainoodin

Dr. Azran Mohd Zainoodin


Research Focus & Metrics

Academic Career Length

7Years (2020-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
21 January 2023 in Polymers
Verified
Journal Article
Open access
PDF file
AAAdam Mohd Izhan Noor Azam
Adam Mohd Izhan Noor Azam
KNKhai Li Ng
Khai Li Ng
NZNurul Noramelya Zulkefli
Nurul Noramelya Zulkefli
Mohd Shahbudin MasdarMohd Shahbudin Masdar
Mohd Shahbudin Masdar
EMEdy Herianto Majlan
Edy Herianto Majlan
SSSiti Nur Amira Shaffee
Siti Nur Amira Shaffee
An investigation was conducted to determine the effects of operating parameters for various electrode types on hydrogen gas production through electrolysis, as well as to evaluate the efficiency of the polymer electrolyte membrane (PEM) electrolyzer. Deionized (DI) water was fed to a single-cell PEM electrolyzer with an active area of 36 cm2. Parameters such as power supply (50–500 mA/cm2), feed water flow rate (0.5–5 mL/min), water temperature (25−80 °C), and type of anode electrocatalyst (0.5 mg/cm2 PtC [60%], 1.5 mg/cm2 IrRuOx with 1.5 mg/cm2 PtB, 3.0 mg/cm2 IrRuOx, and 3.0 mg/cm2 PtB) were varied. The effects of these parameter changes were then analyzed in terms of the polarization curve, hydrogen flowrate, power consumption, voltaic efficiency, and energy efficiency. The best electrolysis performance was observed at a DI water feed flowrate of 2 mL/min and a cell temperature of 70 °C, using a membrane electrode assembly that has a 3.0 mg/cm2 IrRuOx catalyst at the anode side. This improved performance of the PEM electrolyzer is due to the reduction in activation as well as ohmic losses. Furthermore, the energy consumption was optimal when the current density was about 200 mA/cm2, with voltaic and energy efficiencies of 85% and 67.5%, respectively. This result indicates low electrical energy consumption, which can lower the operating cost and increase the performance of PEM electrolyzers. Therefore, the optimal operating parameters are crucial to ensure the ideal performance and durability of the PEM electrolyzer as well as lower its operating costs.

1 December 2020 in Journal of Cleaner Production
Verified
Journal Article
Closed access
NANorulsamani Abdullah
Norulsamani Abdullah
RSR. Saidur
R. Saidur
AZAzran Mohd Zainoodin
Azran Mohd Zainoodin
NANavid Aslfattahi
Navid Aslfattahi

25 October 2020 in Catalysts
Verified
Journal Article
Open access
PDF file
MMMuliani Mansor
Muliani Mansor
STSharifah Najiha Timmiati
Sharifah Najiha Timmiati
Wai Yin WongWai Yin Wong
Wai Yin Wong
AZAzran Mohd Zainoodin
Azran Mohd Zainoodin
KLKean Long Lim
Kean Long Lim
SKSiti Kartom Kamarudin
Siti Kartom Kamarudin
The direct methanol fuel cell (DMFC) is a portable device and has the potential to produce 10 times higher energy density than lithium-ion rechargeable batteries. It is essential to build efficient methanol electrooxidation reaction electrocatalysts for DMFCs to achieve their practical application in future energy storage and conversion. A catalyst consisting of nickel–palladium supported onto mesostructured silica nanoparticles (NiPd–MSN) was synthesized by the wet impregnation method, while MSN was synthesized using the sol-gel method. MSN act as a catalyst support and has very good characteristics for practical support due to its large surface area (>1000 m2/g) and good chemical and mechanical stability. The microstructure and catalytic activity of the electrocatalysts were analyzed by X-ray diffraction (XRD), Fourier transform infrared (FTIR), field emission scanning electron microscopy (FESEM), Brunauer–Emmet–Teller (BET) theory, X-ray photoelectron spectroscopy (XPS), cyclic voltammetry (CV), and chronoamperometry (CA). XRD showed that the NiPd–MSN electrocatalysts had a high crystallinity of PdO and NiO, while FESEM displayed that NiPd was dispersed homogeneously onto the high surface area of MSN. In alkaline media, the catalytic activity toward the methanol oxidation reaction (MOR) of NiPd–MSN demonstrated the highest, which was 657.03 mA mg−1 more than the other electrocatalysts. After 3600 s of CA analysis at −0.2 V (vs. Ag/AgCl), the MOR mass activity of NiPd–MSN in alkaline media was retained at a higher mass activity of 190.8 mA mg−1 while the other electrocatalyst was significantly lower than that. This electrocatalyst is a promising anode material toward MOR in alkaline media.

24 September 2024 in Polymers
Verified
Journal Article
Open access
PDF file
ZRzatil amali binti ramli
zatil amali binti ramli
JPJagadeesh Pasupuleti
Jagadeesh Pasupuleti
SKSiti Kartom Kamarudin
Siti Kartom Kamarudin
AZAzran Mohd Zainoodin
Azran Mohd Zainoodin
Wan Nor Roslam Wan IsahakWan Nor Roslam Wan Isahak
Wan Nor Roslam Wan Isahak
STSieh Kiong Tiong
Sieh Kiong Tiong
Direct Methanol Fuel Cell (DMFC) is a powerful system for generating electrical energy for various applications. However, there are several limitations that hinder the commercialization of DMFCs, such as the expense of platinum (Pt) at market price, sluggish methanol oxidation reaction (MOR) due to carbon monoxide (CO) formation, and slow electrooxidation kinetics. This work introduces carbon nanocages (CNCs) that were obtained through the pyrolysis of polypyrrole (Ppy) as the carbon source. The CNCs were characterized using BET, XRD, HRTEM, TEM, SEM, and FTIR techniques. The CNCs derived from the Ppy source, pyrolyzed at 750 °C, exhibited the best morphologies with a high specific surface area of 416 m2g−1, allowing for good metal dispersion. Subsequently, PtRu catalyst was doped onto the CNC-Ppy750 support using chemical reduction and microwave-assisted methods. In electrochemical tests, the PtRu/CNC-Ppy750 electrocatalyst demonstrated improved CO tolerance and higher performance in MOR compared to PtRu-supported commercial carbon black (CB), with values of 427 mA mg−1 and 248 mA mg−1, respectively. The superior MOR performance of PtRu/CNC-Ppy750 was attributed to its high surface area of CNC support, uniform dispersion of PtRu catalyst, and small PtRu nanoparticles on the CNC. In DMFC single-cell tests, the PtRu/CNC-Ppy750 exhibited higher performance, approximately 1.7 times higher than PtRu/CB. In conclusion, the PtRu/CNC-PPy750 represents a promising electrocatalyst candidate for MOR and anodic DMFC applications.

14 June 2023 in Micromachines
Verified
Journal Article
Open access
PDF file
IHIesti Hajar Hanapi
Iesti Hajar Hanapi
SKSiti Kartom Kamarudin
Siti Kartom Kamarudin
AZAzran Mohd Zainoodin
Azran Mohd Zainoodin
UHUmi Azmah Hasran
Umi Azmah Hasran
ZZZulfirdaus Zakaria
Zulfirdaus Zakaria
Membrane-less fuel cells are a promising power source for portable applications that enable the solving of membrane-related issues, such as water management and high cost, in conventional fuel cells. Apparently, research on this system uses a single electrolyte. This study focused on enhancing the performance of membrane-less fuel cells by introducing multiple reactants that are dual electrolytes with hydrogen peroxide (H2O2) and oxygen as oxidants in membrane-less direct methanol fuel cells (DMFC). The conditions tested for the system are (a) acidic, (b) alkaline, (c) dual medium with oxygen as an oxidant, and (d) dual medium and dual oxygen and hydrogen peroxide as an oxidant. Additionally, the effect of fuel utilization on different electrolyte and fuel concentrations was also studied. It was found that the fuel utilization decreases dramatically with the increasing of the fuel concentration, but it improved with the increasing of the electrolyte concentration until 2M. The performance of the dual oxidants in dual-electrolyte membrane-less DMFCs was 15.5 mW cm−2 of the power density achieved before optimization. Later, the system was optimized, and the power density increased to 30 mW cm−2. Finally, this work presented the stability of the cell using the suggested parameters from the optimization process. This study indicated that the performance of the membrane-less DMFC increased for dual electrolytes with mixed oxygen and hydrogen peroxide as oxidants compared to a single electrolyte.

1 February 2020 in Jurnal Kejuruteraan
Verified
Journal Article
Closed access
FAFarah Atiqah Abdullah
Farah Atiqah Abdullah
SKSiti Kartom Kamarudin
Siti Kartom Kamarudin
AZAzran Mohd Zainoodin
Azran Mohd Zainoodin
MMMohd Shahbudin Masdar
Mohd Shahbudin Masdar