The article is focused on finding the possibility of the controlled orientation of fibres in fibre reinforced concrete constructions. This is because the controlled orientation of the fibres can contribute to the improvement of some properties of fibre reinforced concrete. The research is based on the experimental investigation of orientation control–rotation of fibres in a transparent matrix representing concrete replacement. From the conceptual model, the article continues with experimentation, data analysis and comparison of conclusions. During the experiment, a mechanical tool was developed and monitored to guide the fibres. The main monitored parameters of the levelling tool were the tips dimensions and the distance between them. The experiment results show the possibility of achieving a higher orientation of the fibres around one axis and suitable parameters of a mechanical tool.
The integration of energy-active elements into the building envelope in the form of large-area heating/cooling, active thermal protection (ATP), thermal barriers (TB), and TABS represents a technical solution that is consistent with the principles of energy sustainability, resilience, and adaptability to climate change and ensures affordable and clean energy for all while protecting the climate in the context of the UN Sustainable Development Goals. The aim and innovation of our research is to develop energy multifunctional facades (EMFs) that are capable of performing a dual role, which includes the primary known energy functions of end elements and the additional innovative ability to serve as a source of heat/cooling/electricity. This new function of EMFs will facilitate heat dissipation from overheated facade surfaces, preheating of hot water, and electricity generation for the operation of building energy systems through integrated photovoltaic components. The theoretical assumptions and hypotheses presented in our previous research work must be verified by experimental measurements with predictions of the optimal operation of building energy systems. Most existing studies on thermal barriers are based on calculations. However, there are few empirical measurements that quantify the benefits of ATP in real operation and specify the conditions under which different types of ATP are feasible. In this article, we present the development, design, and implementation of an experimental prototype of a prefabricated building module with integrated energy-active elements. The aim is to fill the knowledge gaps by providing a comprehensive framework that includes the development, research, design, and implementation of combined energy systems for buildings. The design of energy systems will be developed in BIM. An important result of this research is the development of a technological process for the implementation of a contact insulation system with integrated ATP in modular and panel buildings with a lightweight envelope.
1 June 2013 in Slovak Journal of Civil Engineering
Generally, the role of living organisms (especially bacteria, cyanophytes, algae and fungi) in the physical and chemical processes of the biocorrosion of an external thermal insulation composite system (ETICS) is underestimated. These organisms are the ones that are responsible for a wide range of changes in or "diseases" of building materials and constructions, including damage to a building´s appearance or the destruction and complete collapse of the characteristics and requirements of materials and the ETICS construction. The following article concerns the impact of biological factors on the durability of ETICS. It shows the importance of and necessity to maintain it, and the method and periodicity of the maintenance.
To find solutions for maintenance and repair of existing structures ETICS becomes the current another issue of improvement thermal insulation proprieties of external cladding, which need to be answered necessarily till December 2020. Double thermal insulation technology can be achieved by jointly increasing of thermal insulation properties and by repairing surface porosity ETICS. The aim of the research is the analysis of alternative insulation materials in plaster repair by technology "double thermal insulation" ETICS in terms of technology, humidity and temperature conditions in the layers. Technology of double thermal insulation is analyzed in the context with solution biocorrosion surface thermal insulation. In the end of the research there is obtained the data from the comparisson of technology double thermal insulation with different insulation materials expressed by graph. Obtained data can be the basis for decision to choosing a repair, to solution for the structural details of double thermal insulation and also for experimentally assess the lifespan of the double ETICS.
27 June 2017 in Selected Scientific Papers - Journal of Civil Engineering
The theme of improvement thermal proprieties of external cladding according to the New EU Directive is still a hot topic, which needs to be answered necessarily till December 2020. Maintenance and repair of existing ETICS became to also an actual open theme in search solutions for existing constructions. The aim of the research in this review is to analyze influence of layers the alternative thermal materials in technology “double thermal insulation”. Humidity and temperature conditions will be further examined in connection with the development and colonization of microorganisms on surface construction.
31 December 2023 in Czech Journal of Civil Engineering
The study is analytical in nature, and the result is pointing out the possible duplication of protective zones when underground and overhead lines are laid simultaneously or when they cross, and the risk of unjust enrichment when determining the value of an adequate compensation for the scope of the easement.