Peter Makýš

Dr. Peter Makýš


Research Focus & Metrics

Academic Career Length

16Years (2011-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 September 2021 in Applied Sciences
Verified
Journal Article
Open access
PDF file
Pavol MayerPavol Mayer
Pavol Mayer
TFTomas Funtik
Tomas Funtik
JOZEF GAŠPARÍKJOZEF GAŠPARÍK
JOZEF GAŠPARÍK
PMPeter Makýš
Peter Makýš
Building information modeling (BIM) brings several benefits to design and construction companies, especially in higher efficiency and quality of work. Several companies also use common data environment (CDE) systems, which speed up communication and collaboration between project participants. These can be used for occupational health and safety (HS) purposes and to increase the level of HS on construction sites. The first part of the article presents the state-of-the-art possibilities and approaches to implementing BIM in automatic or semi-automatic health and safety hazard detection. The following parts analyze the interviews with experts in BIM coordination, project management and health and safety in Slovakia and their answers to a survey, that covers the topic of safety hazard detection in BIM. The analysis shows that BIM is a suitable tool for increasing safety on construction sites, but there are several obstacles to achieving its full potential. The survey brings readers closer to the current state of the topic and the possibilities offered by BIM and CDE software in Slovakia. This paper, through the requirements and opinions of experts in BIM, project management and HS management, points out areas for further research and development of BIM software.

7 August 2021 in Materials
Verified
Journal Article
Open access
PDF file
MĎMarek Ďubek
Marek Ďubek
PMPeter Makýš
Peter Makýš
MPMarek Petro
Marek Petro
HEHelena Ellingerová
Helena Ellingerová
NANaďa Antošová
Naďa Antošová
The article is focused on finding the possibility of the controlled orientation of fibres in fibre reinforced concrete constructions. This is because the controlled orientation of the fibres can contribute to the improvement of some properties of fibre reinforced concrete. The research is based on the experimental investigation of orientation control–rotation of fibres in a transparent matrix representing concrete replacement. From the conceptual model, the article continues with experimentation, data analysis and comparison of conclusions. During the experiment, a mechanical tool was developed and monitored to guide the fibres. The main monitored parameters of the levelling tool were the tips dimensions and the distance between them. The experiment results show the possibility of achieving a higher orientation of the fibres around one axis and suitable parameters of a mechanical tool.

30 November 2023 in Buildings
Verified
Journal Article
Open access
PDF file
TFTomas Funtik
Tomas Funtik
PMPeter Makýš
Peter Makýš
MĎMarek Ďubek
Marek Ďubek
Ján ErdélyiJán Erdélyi
Ján Erdélyi
Richard HontiRichard Honti
Richard Honti
CEROVŠEK TomoCEROVŠEK Tomo
CEROVŠEK Tomo
Building information modeling (BIM) is a key approach for the digitization of the sector. Therefore, states worldwide put BIM at the center of their construction digitalization strategies. However, strategies vary significantly, and so does BIM implementation and its adoption over time, thus making the comparison between countries considerably challenging. Therefore, the first part of this article provides a comprehensive review of available publications in the field of BIM adoption at the national and international level. BIM adoption in Slovakia is systematically analyzed based on an anonymous online BIM survey that focuses on various areas of BIM. The focus of the BIM survey was on the assessment of the readiness of experts who work with BIM methodology, their maturity, skillsets, and BIM adoption motivation, along with the means of communication and collaboration using Common Data Environment (CDE). Furthermore, we focused on the project management perspective, which covers the existence and compliance with BIM execution plan (BEP) evaluation. In the concluding part, requirements, barriers, and future developments are discussed in detail. The BIM survey provides an insight in the current state of the art of BIM in the industry that allows for a better understanding of its potential and a more informed development and implementation of BIM strategies. This study is an important contribution to BIM and digitalization benchmarking that provides valuable information to digitalization policy makers at the governmental and business levels.

18 July 2023 in Sustainability
Verified
Journal Article
Open access
PDF file
PŠPatrik Šťastný
Patrik Šťastný
PMPeter Makýš
Peter Makýš
IVIvan Vavrík
Ivan Vavrík
DKDaniel Kalús
Daniel Kalús
This article presents the results of an experiment that involved applying additional impermeable layers on an historical building in the area of Káčerov Majer. The building showed a high level of waterlogging, which was detected by an initial inspection and subsequent moisture measurements that involved taking a set of measurements and recording the data in a spreadsheet linked to the plan view of the building. Then, a suitable method was devised to prevent rising damp and to assist in drying out the building. Several measurements after the application of remediation interventions were used for this purpose. The interventions, together with a comprehensive restoration, were intended to contribute to the reuse of the building, and thus its sustainability from technical, environmental, functional, and economic points of view. The aim of this research was to demonstrate the degree of effectiveness of undercutting technology in combination with local application of stainless-steel sheet piling and grouting technology, as one example of sustainability, which is a very relevant topic at the moment. These technologies were intended to provide remediation of the building against rising damp which was destructive to the structure. The environment in this building was affected by moisture and was also unhealthy, which made it difficult to use the building. For these reasons, it was necessary to take radical steps, by applying invasive anti-moisture technologies. The appropriateness and effectiveness of the technologies used have been evidenced by the results published in this article that have also been supplemented by photographs before and after the application of the remediation measures. This research demonstrates the effectiveness of the interventions and the need to also implement them on certain selected buildings where there is a high level of dampness causing degradation. From a sustainability point of view, such a step is essential to preserve the life of such structures and their continued use. The results of this research clearly demonstrate the appropriateness of comprehensive restoration of selected historical buildings, complemented by invasive damp-proofing interventions, as one of the important aspects of the sustainability of deteriorating monuments, whose numbers are constantly increasing.

27 January 2025 in Heritage
Verified
Journal Article
Open access
PDF file
Oto MakýšOto Makýš
Oto Makýš
PŠPatrik Šťastný
Patrik Šťastný
PMPeter Makýš
Peter Makýš
MĎMarek Ďubek
Marek Ďubek
Condition surveys are an important part of the whole scientific research of torso buildings, which we understand to be buildings with usually missing roofs, wooden ceilings, doors, windows, and other envelope constructions along with damaged internal and external infrastructure and surfaces. The aim of the processed condition surveys is to gather basic data on the technical state of the buildings. Torso buildings are, in our environment, especially the ruins of castles and manor houses, but also some churches, the remains of industrial enterprises, or even others. The proposed condition surveys can be used at any of them, not only in our country, but also in any other country of the world. The processed system of condition surveys allows us to anticipate further damage to architectural heritage buildings caused by their aging. It can contribute in a major way to the identification of eventual construction risks and to anticipate them. Condition surveys are designed as a quick, cheap, and easy to handle way to gather the basic overview needed for undertaking a basic stabilization of the most endangered parts of the ruins. In the next step, further scientific research using instruments i.e., in laboratories, can be undertaken. It is also important to know which parts of the torso buildings are dangerous and can endanger not only visitors, but also scientists realizing research on site. The first goal of the project focused on bettering of the stability of the torso buildings, especially ruins of castles, which was granted by the Slovak Ministry of Culture to elaborate and prepare a system for the identification of the most endangered parts of the ruins, which are in danger of dilapidation soon. The second goal was focused on preparing source material for further scientific research of the torso architecture. Experts from the Faculty of Civil Engineering of the Slovak University of Technology, with the cooperation of experts from praxis and from the Architectural Heritage Protection Office prepared a system for judging the construction details of torso buildings from the point of view of their construction–technical state. The aim of this judging lies in identifying the parts of their constructions that are most endangered by decay. Based on the condition survey results, conservation activities can be organized to save valuable details of the torso buildings before destruction and to protect the visitors of such localities before injuries, maybe even tragic injuries.

21 November 2024 in Energies
Verified
Journal Article
Open access
PDF file
JHJán Hlina
Ján Hlina
PMPeter Makýš
Peter Makýš
PŠPatrik Šťastný
Patrik Šťastný
LPLucia Paulovičová
Lucia Paulovičová
This article focuses on the energy performance of buildings with an emphasis on the consequences of non-compliance with technological practices during the building process. We analyse the impact of construction deficiencies on the consumption of heat for heating, focusing on specific case studies of selected building constructions in the Slovak Republic. The results show that non-compliance with prescribed technological standards and procedures leads to significant deterioration in the building’s energy efficiency, which is manifested in increased heat consumption and higher operating costs. The findings of this study have key importance for future construction projects as they offer valuable recommendations for improving energy standards and construction quality, thus contributing to a more sustainable and efficient building process. When designing buildings with near-zero energy demand, it is necessary to eliminate all risks in the project that arise during the preparation and design itself, as well as during implementation.