In this paper, the kinetics of the reaction of phenyl isocyanate with crosslinking agents such as sucrose, sorbitol, and glycerol are reported. Crosslinking agents were used in high molar excess to isocyanate to obtain pseudo-first-order rate dependencies, and the reaction products were separated by high-performance liquid chromatography and detected by UV spectroscopy and mass spectrometry. It was found that the glycerol’s primary hydroxyl groups were approximately four times reactive than the secondary ones. However, in the case of sorbitol, the two primary OH groups were found to be the most reactive, and the reactivity of hydroxyl groups decreased in the order of k_OH(6)(8.43) > k_OH(1)(6.91) > k_OH(5)(1.19) > k_OH(2)(0.98) > k_OH(3)(0.93) > k_OH(4)(0.64), where the numbers in the subscript and in the brackets denote the position of OH groups and the pseudo-first-order rate constants, respectively. The Atomic Polar Tenzor (APT) charges of OH groups and dipole moments of monosubstituted sorbitol derivatives calculated by density functional theory (DFT) also confirmed the experimental results. On the other hand, the reactions of phenyl isocyanate with crosslinking agents were also performed using high excess isocyanate in order to determine the number of OH-groups participating effectively in the crosslinking process. However, due to the huge number of derivatives likely formed in these latter reactions, a simplified reaction scheme was introduced to describe the resulting product versus reaction time distributions detected by matrix-assisted laser desorption/ionization mass spectrometry (MALDI-TOF MS). Based on the results, the kinetically equivalent functionality (f_k) of each crosslinking agent was determined and found to be 2.26, 2.6, and 2.96 for glycerol, sorbitol, and sucrose, respectively.

Sucrose-1,6-hexamethylene diisocyanate (HDI) cooligomers were synthesized and used as new polyols for poly(ε-caprolactone) (PCL)-based polyurethanes. The polyaddition reaction of sucrose and HDI was monitored by MALDI-TOF MS. It was found that by selecting appropriate reaction conditions, mostly linear oligomer chains containing 16 sucrose units could be obtained. For the synthesis of polyurethane networks, prepolymers were prepared by the reaction of poly(ε-caprolactone) (PCL, 10 kg/mol) with HDI or 4,4′-methylene diphenyl diisocyanate (MDI) and were reacted with sucrose-HDI cooligomers. The so-obtained sucrose-containing polyurethanes were characterized by means of attenuated total reflectance Fourier-transform infrared spectroscopy (ATR-FT IR), swelling, mechanical (uniaxial tensile tests) and differential scanning calorimetry (DSC).

In this article, the capability of encoding information using a homologous series of monodisperse monomethoxypolyethylene glycols (mPEG), with a number of ethylene oxide units ranging from n_EO = 5 to 8, and monodisperse linear aliphatic isocyanates containing a number of CH₂ units from 3 to 7, is demonstrated. The “click” reaction of the two corresponding homologous series yielded 20 different isocyanate end-capped polyethylene glycol derivatives (mPEG-OCONHR) whose sodiated adduct ion’s nominal m/z values spanned from 360 to 548, providing an average ca. 8 m/z unit for the storage of one-bit information. These mPEG-OCONHR oligomers were then used to encode information in binary sequences using a 384-well MALDI sample plate and employing the common dried-droplet sample preparation method capable of encoding 20 bit, i.e., 2.5 byte information in one spot, was employed. The information stored in the spots was read by MALDI-TOF MS using the m/z value of the corresponding mPEG-OCONHR oligomers. The capability of the method to store data was demonstrated by writing and reading a text file, visualizing a small picture and capturing a short audio file written in Musical Instrument Digital Interface (MIDI) sequence. Due to the very large similarities in the chemical structures of the encoding oligomers and their “easy to be ionized” property, as well as their very similar ionization efficiencies, the MALDI-TOF MS signal intensities from each compound was so strong and unambiguous that complete decoding could be performed in each case. In addition, the set of the proposed encoding oligomers can be further extended to attain higher bit “densities”.

In this work, the preparation and systematic investigation of cross-linked polyurethane-epoxy (PU-EP) polymer systems are reported. The PU-EP polymers were prepared using a reaction of isocyanate (NCO)-terminated PU-prepolymer with diglycidyl ether of bisphenol A (DGEBA)-amine cooligomer. The oligomerization of DGEBA was carried out by adding furfurylamine (FA) or ethanolamine (EA), resulting in DGEBA-amine cooligomers. For the synthesis of NCO-terminated PU-prepolymer, poly(ε-caprolactone)diol (PCD) (M_n = 2 kg/mol) and 1,6-hexamethylene diisocyanate (HDI) were used. The cross-linking was achieved by adding DGEBA-amine cooligomer to PU-prepolymer, in which the obtained urethane bonds, due to the presence of free hydroxil groups in the activated DGEBA, served as netpoints. During cross-linking, ethanolamine provides an additional free hydroxyl group for the formation of a new urethane bond, while furfurylamine can serve as a thermoreversible coupling element (e.g., Diels–Alder adduct). The PU-EP networks were characterized using attenuated total reflectance Fourier-transform infrared spectroscopy (ATR-FTIR), differential scanning calorimetry (DSC), dynamical mechanical analysis (DMA) and scanning electron microscopy (SEM). The DMA curves of some PU-EPs (depending on the compositions and the synthetic method) revealed a plateau-like region above the melting temperature (T_m) of PCD, confirming the presence of a cross-linked structure. This property resulted in a shape memory (SM) behavior for these samples, which can be fine-tuned in the presence of furfurylamine through the formation of additional thermoreversible bonds (e.g., Diels–Alder adduct).

Long-COVID syndrome is associated with high healthcare costs, but its pathophysiology is not yet fully understood. Inflammation, renal impairment or disturbance of the NO system emerge as potential pathogenetic factors. We aimed to investigate the relationship between symptoms of long-COVID syndrome and serum levels of cystatin-c (CYSC), orosomucoid (ORM), l-arginine, symmetric dimethylarginine (SDMA) and asymmetric dimethylarginine (ADMA). A total of 114 patients suffering from long-COVID syndrome were included in this observational cohort study. We found that serum CYSC was independently associated with the anti-spike immunoglobulin (S-Ig) serum level (OR: 5.377, 95% CI: 1.822–12.361; p = 0.02), while serum ORM (OR: 9.670 (95% CI: 1.34–9.93; p = 0.025) independently predicted fatigue in patients with long-COVID syndrome, both measured at baseline visit. Additionally, the serum CYSC concentrations measured at the baseline visit showed a positive correlation with the serum SDMA levels. The severity of abdominal and muscle pain indicated by patients at the baseline visit showed a negative correlation with the serum level of L-arginine. In summary, serum CYSC may indicate subclinical renal impairment, while serum ORM is associated with fatigue in long-COVID syndrome. The potential role of l-arginine in alleviating pain requires further studies.

In this research, the kinetics of the reaction of various polymer polyol crosslinking agents with phenyl isocyanate is reported.