The paper analyzes the structure and properties of metal, cermet, and ceramic NbMoCrTiAl high-entropy alloy (HEA) coatings formed on solid substrates by plasma-assisted vacuum arc deposition (from multicomponent gas-metal plasma through Nb, Mo, Cr, and TiAl cathode evaporation in argon and/or a mixture of argon and nitrogen). The analysis shows that all coatings represent a nanocrystalline (3–5 nm) multilayer film. The metal coating has a bcc lattice (a = 0.3146 nm). The ceramic coating has an fcc lattice (an uncertain lattice parameter due to highly smeared diffraction peaks). The coating hardness increases in the order of metal, cermet, and then ceramic, reaching 43 GPa at Young’s modulus equal to 326 GPa. When heated in air, the metal and cermet coatings start to oxidize at 630–640 °C, and the ceramic coating at 770–780 °C.
1 October 2018 in Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment
This paper presents a study of a combined modification of silumin, which included deposition of a ZrN coating on a silumin substrate and subsequent treatment of the coating/substrate system with a submillisecond pulsed electron beam. The local temperature on the samples in the electron-beam-affected zone and the thickness of the melt zone were measured experimentally and calculated using a theoretical model. The Stefan problem was solved numerically for the fast heating of bare and ZrN-coated silumin under intense electron beam irradiation. Time variations of the temperature field, the position of the crystallization front, and the speed of the front movement have been calculated. It was found that when the coating thickness was increased from 0.5 to 2 μm, the surface temperature of the samples increased from 760 to 1070 °C, the rise rate of the surface temperature increased from 6 × 107 to 9 × 107 K/s, and the melt depth was no more than 57 μm. The speed of the melt front during the pulse was 3 × 105 µm/s. Good agreement was observed between the experimental and theoretical values of the temperature characteristics and melt zone thickness.
Multilayer cermet coatings based on a TiNbZrTaHf high-entropy alloy were produced on solid substrates by plasma-assisted vacuum-arc deposition. The assisting multicomponent metal-gas plasma was generated by evaporating TiNbZrTaHf cathodes in a gas mixture of nitrogen and argon. It was found that the coatings were nanocrystalline in structure (with nanocrystal sizes ranging from 2.5 to 4 nm). The metallic layer had a body-centered cubic lattice (a = 0.33396 nm), and the ceramic layer had a face-centered cubic lattice (a = 0.44465 nm). Transition layers formed between the substrate and the metallic layer and between the metallic and the ceramic layers were revealed. The hardness of the coatings was 36.7 GPa and their Young’s modulus was 323 GPa.
About Me
Employee of the Institute of High Current Electronics. Areas of interest: plasma physics, arc discharge, vacuum arc coatings.
Employee of the Institute of High Current Electronics. Areas of interest: plasma physics, arc discharge, vacuum arc coatings.