Tamara V. Koval

Prof. Tamara V. Koval


Research Focus & Metrics

Academic Career Length

14Years (2013-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
28 November 2021 in Coatings
Verified
Journal Article
Open access
PDF file
Nikolay KovalNikolay Koval
Nikolay Koval
TKTamara V. Koval
Tamara V. Koval
Olga KrysinaOlga Krysina
Olga Krysina
YIYurii Fedorovich Ivanov
Yurii Fedorovich Ivanov
ATAnton Teresov
Anton Teresov
EElizaveta Petrikova
Elizaveta Petrikova
This paper presents a study of a combined modification of silumin, which included deposition of a ZrN coating on a silumin substrate and subsequent treatment of the coating/substrate system with a submillisecond pulsed electron beam. The local temperature on the samples in the electron-beam-affected zone and the thickness of the melt zone were measured experimentally and calculated using a theoretical model. The Stefan problem was solved numerically for the fast heating of bare and ZrN-coated silumin under intense electron beam irradiation. Time variations of the temperature field, the position of the crystallization front, and the speed of the front movement have been calculated. It was found that when the coating thickness was increased from 0.5 to 2 μm, the surface temperature of the samples increased from 760 to 1070 °C, the rise rate of the surface temperature increased from 6 × 107 to 9 × 107 K/s, and the melt depth was no more than 57 μm. The speed of the melt front during the pulse was 3 × 105 µm/s. Good agreement was observed between the experimental and theoretical values of the temperature characteristics and melt zone thickness.

5 November 2015 in Journal of Physics: Conference Series
Verified
Conference Paper
Open access
PDF file
TKTamara V. Koval
Tamara V. Koval
VDV N Devyatkov
V N Devyatkov
NHNguyen Bao Hung
Nguyen Bao Hung
The paper reports on a theoretical and experimental study of the discharge plasma generation with an enhanced electron emission current in a plasma electron source based on a low-pressure arc discharge with a grid-stabilized plasma emission boundary. The source operates at a pressure in the working chamber of p = 0.02-0.05 Pa (Ar), accelerating voltage of up to Ua = 10 kV, and longitudinal magnetic field for electron beam transport of up to Bz = 0.1 T. The experiments show that in the mode of electron emission from the plasma, the voltage Ud between the cathode and grid electrode changes its sign. The numerical simulation demonstrates that the plasma potential and voltage Ud depend on the electric field penetrating from the acceleration gap into the discharge region through the grid meshes, and on the discharge current, gas pressure, geometric transparency of the grid, and gas kind. It is shown that the main mechanisms responsible for the increase in the discharge current and electron emission current from the plasma are associated with secondary ion-electron emission from the emission electrode and with positive feedback between the region of cathode plasma generation and the channel of electron beam transport.

1 January 2022 in Technical Physics
Verified
Journal Article
Closed access
MVMaxim Vorobyov
Maxim Vorobyov
MPMoskvin P.V.
Moskvin P.V.
SVShin V.I.
Shin V.I.
TKTamara V. Koval
Tamara V. Koval
DVDevyatkov V.N.
Devyatkov V.N.
AKAshurova K.T.
Ashurova K.T.
Using the example of an electron source with a plasma cathode based on a low-pressure arc discharge with grid stabilization of the cathode/emission plasma boundary and an open anode/beam plasma boundary, a mechanism is described for increasing the electrical strength of a high-voltage accelerating gap by introducing a series negative current feedback (NCF) in the accelerating interval, which makes it possible to level out uncontrolled bursts of the beam current during its pulse. The introduction of NCF is achieved by using a special electrode in the space of the plasma emitter connected through a resistance to the anode of the arc discharge, and the main task of which is to intercept accelerated ions penetrating into the emitter from the high-voltage accelerating gap, due to which the current of electron emission from the arc discharge plasma decreases by a value proportional to the ion current in the accelerating gap. Since most sources and accelerators of electrons with plasma cathodes based on discharges of various types have a similar principle of operation, the use of this method will not only expand the limiting parameters of the generated electron beams, but also increase the stability of the operation of such electron sources, and, accordingly, beam irradiation of various materials and products. Keywords: arc discharge, plasma cathode, electron source, electron beam, ion beam, negative feedback.

1 November 2019 in Bulletin of the Russian Academy of Sciences: Physics
Verified
Journal Article
Closed access
PDF file
TKTamara V. Koval
Tamara V. Koval
TATran My Kim An
Tran My Kim An
VTV. P. Tarakanov
V. P. Tarakanov
Major patterns of ion beam transport in a system with ballistic focusing are studied via numerical modeling. It is shown that the efficiency of transporting a beam of metal ions at 0.66 A and...

1 December 2023 in Bulletin of the Russian Academy of Sciences: Physics
Verified
Journal Article
Closed access
PDF file
TKTamara V. Koval
Tamara V. Koval
VSV. I. Shin
V. I. Shin
MVMaxim Vorobyov
Maxim Vorobyov
PMP. V. Moskvin
P. V. Moskvin
VDV. N. Devyatkov
V. N. Devyatkov
Nikolay KovalNikolay Koval
Nikolay Koval
An experimental and theoretical study is carried out to control the distribution of electron beam current density in a SOLO source with a plasma cathode based on a low-pressure arc discharge with grid stabilization of the emission plasma boundary. It has been shown experimentally and numerically that using a control electrode in the form of a disk (disks) in the plasma cathode and a leading magnetic field, it is possible to change the distribution of the emission current density and, accordingly, the energy density of the electron beam on the collector. Theoretical study using the envelope method, “particle-in-cells” method and drift-diffusion models shows good agreement with experiment.

27 November 2018 in Journal of Physics: Conference Series
Verified
Conference Paper
Open access
PDF file
TKTamara V. Koval
Tamara V. Koval
ARA I Ryabchikov
A I Ryabchikov
TATran My Kim An
Tran My Kim An
ASAlexey Shevelev
Alexey Shevelev
DSD O Sivin
D O Sivin
DPD M Paltsev
D M Paltsev
The features and regularities of plasma-immersion formation of high-intensity repetitively pulsed beams of aluminum ions, as well as their transportation and ballistic focusing in an accelerating system with a curvilinear extracting potential grid electrode under application of negative bias with high pulse repetition rate of f = 105 Hz are studied by numerical methods. It is shown that the amplitude and shape of the ion beam current pulse depend significantly on the dynamic conditions of space charge neutralization of the beam. In case of using of bias potential with high duty factor, e.g. conditions of limited time of vacuum-arc plasma preinjection, the process of transportation and ballistic focusing of the ion beam up to densities manifold exceeding the density of the preliminary injected plasma, it is possible to obtain conditions leading to the formation of a virtual anode. It is shown that secondary electrons can be one of the additional mechanisms of compensation of the beam space charge which results in the improvement of transportation of high-intensity beams of aluminum ions.