José Manuel Campos-Salazar

Dr. José Manuel Campos-Salazar

Electronic Engineering Department, Universitat Politecnica de Catalunya (UPC), Barcelona, Catalonia, Spain

Research Focus & Metrics

Academic Career Length

1Year (2026-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
7 June 2024 in Journal of Electronics and Electrical Engineering
Verified
Journal Article
Open access
PDF file
José Manuel Campos-SalazarJosé Manuel Campos-Salazar
José Manuel Campos-Salazar
AVAriel Viani-Abad
Ariel Viani-Abad
RSRodrigo Sandoval-García
Rodrigo Sandoval-García
Exploring the fundamental principles of system modeling in electrical engineering, this study delves into the transformative power of the d-q transformation, highlighting its pivotal role in rendering time-varying systems into a coherent steady-state representation. Departing from conventional approaches, the study navigates the complexities of single-phase transformer configurations, utilizing the Clarke and Park transformations to seamlessly transition between electrical coordinates and the d-q frame. Through extensive derivations, dynamic equations are formulated in both α-β and d-q coordinates, providing a detailed understanding of system dynamics under specific loads. In addition, the study extends the analysis to a generalized multi-winding transformer model that accommodates a wide range of transformer setups. With detailed mathematical derivations, insightful visual aids, and clear state-space representations, this work attempt to be a resource for researchers seeking to unravel the intricacies of electrical system modeling and analysis.

1 January 2026 in Energy Engineering
Verified
Journal Article
Open access
PDF file
José Manuel Campos-SalazarJosé Manuel Campos-Salazar
José Manuel Campos-Salazar
FSFelipe Santander
Felipe Santander
EKEduardo Keim
Eduardo Keim
A nonlinear dynamic framework is developed to represent the coupled mass- and energy-transfer phenomena governing an industrial phosphate-pebble dryer. The formulation integrates combustion, gas–solid heat exchange, moisture evaporation, and exhaust-draft dynamics into a unified set of nonlinear differential equations suitable for transient analysis and control design. Steady-state operating conditions are first established, followed by local linearization to enable the synthesis of decentralized proportional–integral (PI) controllers using direct-synthesis principles. The resulting control architecture regulates key process variables, including vacuum pressure, outlet moisture content, and furnace temperature. The proposed model is implemented in MATLAB/Simulink using a modular structure that preserves the physical interpretation of each subsystem while enabling efficient numerical simulation. Closed-loop performance is evaluated under multiple disturbance scenarios, including variations in pressure, feed moisture, temperature, and flow conditions representative of industrial operation. Simulation results demonstrate that the designed controllers satisfy operational constraints, achieving overshoot values below 20% and steady-state errors under 5% across all regulated variables. The responses exhibit stable and well-damped behavior, confirming the suitability of the control-oriented modeling approach for capturing dominant process dynamics. The resulting framework provides a physically grounded and computationally efficient representation that supports dynamic performance assessment, disturbance rejection analysis, and future extensions toward advanced control strategies and energy-efficiency optimization.

19 April 2025 in Electronics
Verified
Journal Article
Open access
PDF file
José Manuel Campos-SalazarJosé Manuel Campos-Salazar
José Manuel Campos-Salazar
Sergio Busquets-MongeSergio Busquets-Monge
Sergio Busquets-Monge
AFAlber Filba-Martinez
Alber Filba-Martinez
Salvador AlepuzSalvador Alepuz
Salvador Alepuz
This work introduces a novel battery charger implemented with a four-level three-phase neutral-point-clamped converter and a four-level single-phase dual-active-bridge converter, which offers the intrinsic advantages of multilevel conversion, provides galvanic isolation and allows bidirectional power flow. A detailed and extensive modeling of the system is developed, together with the design of appropriate closed-loop control and modulation. The proposed system allows individual charging of each battery pack, ensuring that the full capacity of the battery bank is utilized, even when the battery packs have different state-of-charge levels, differ in nominal capacities, or use different chemistries. Furthermore, the proposed control system manages the overall DC-link voltage and ensures voltage balance across both DC-links in the system. The effectiveness of the proposed system configuration and control has been validated through simulations. The simulation results show good dynamic response in different operating scenarios, confirming the suitability, feasibility, and benefits of the proposed implementation and control approach.

31 July 2023 in TechRxiv
Verified
Preprint
Open access
PDF file
José Manuel Campos-SalazarJosé Manuel Campos-Salazar
José Manuel Campos-Salazar
This paper presents a comprehensive study of the single-stage capacitor microphone, an electromechanical device. It integrates temporal modeling and an efficient linear-quadratic regulator control system. Simulations are used to verify the reliability and performance of the single-stage capacitor microphone and the linear-quadratic regulator control system, demonstrating zero steady-state error and rapid convergence.

7 July 2024 in Electronics
Verified
Journal Article
Open access
PDF file
GGGabriel Garcia-Rojas
Gabriel Garcia-Rojas
Sergio Busquets-MongeSergio Busquets-Monge
Sergio Busquets-Monge
Robert GriñóRobert Griñó
Robert Griñó
José Manuel Campos-SalazarJosé Manuel Campos-Salazar
José Manuel Campos-Salazar
This letter derives and discusses the superiority of a simple dc-link capacitor voltage control configuration for multilevel neutral-point-clamped converters with any number of levels. The control involves n − 2 control loops regulating the difference between the voltage of neighbor capacitors. These control loops are inherently decoupled, i.e., they are independent and the control action of one loop does not affect the others. This method is proven to be equivalent to previously published approaches, with the added advantages of increased simplicity and scalability to a higher number of levels, all while imposing a lower computational burden. The good performance of such control is confirmed through simulations and experiments.

1 January 2024 in AIMS Electronics and Electrical Engineering
Verified
Journal Article
Open access
PDF file
José Manuel Campos-SalazarJosé Manuel Campos-Salazar
José Manuel Campos-Salazar
PLPablo Lecaros
Pablo Lecaros
RSRodrigo Sandoval-García
Rodrigo Sandoval-García
This article presents an in-depth dynamic analysis and comparative evaluation of three distinct control strategies—proportional-integral (PI) compensator, linear quadratic regulator (LQR), and sliding mode control (SMC)—applied to a nonlinear process in two configurations: non-interactive system (NIS) and interactive system (IS). The primary objective was to optimize the regulation of fluid levels in a dual-tank system subject to external disturbances and varying operational conditions. The process dynamics were initially modeled using nonlinear differential equations, which were subsequently linearized to facilitate the design of the PI and LQR controllers. The PI compensator design was rooted in state-space representation and was tuned using the Ziegler-Nichols method to achieve the desired transient and steady-state performance. The LQR design employed optimal control theory, minimizing a quadratic cost function to derive the state feedback gain matrix, ensuring system stability by shifting the eigenvalues of the closed-loop system matrix into the left half of the complex plane. In contrast, the SMC leveraged the full nonlinear dynamics of the process, establishing a sliding surface to drive the system states toward a desired trajectory with robustness against model uncertainties and external disturbances. The SMC's performance was evaluated by analyzing the existence and stability of the sliding mode using the derived switching laws for the actuation signal. The comparative study was conducted through simulations in MATLAB/Simulink environments, where each controller's performance was assessed based on transient response, robustness to disturbances, and computational complexity. The results indicate that while the PI compensator and LQR provide satisfactory performance under linearized assumptions, the SMC demonstrates superior robustness and precision in managing the nonlinearities inherent in the IS configuration. This comprehensive analysis underscores the critical trade-offs between simplicity, computational overhead, and control efficacy when selecting appropriate control strategies for nonlinear, multi-variable processes.